- 您现在的位置：买卖IC网 > PDF目录16756 > B82422T1222K (EPCOS Inc)INDUCTOR 2.2UH 320MA 1210 10% PDF资料下载
参数资料
| 型号： | B82422T1222K |
| 厂商： | EPCOS Inc |
| 文件页数： | 8/9页 |
| 文件大小： | 0K |
| 描述： | INDUCTOR 2.2UH 320MA 1210 10% |
| 产品变化通告： | B82422x Material Change 07/Oct/2011 |
| 标准包装： | 1 |
| 系列： | SIMID |
| 电感： | 2.2µH |
| 电流： | 320mA |
| 类型： | 铁氧体芯体 |
| 容差： | ±10% |
| 屏蔽： | 无屏蔽 |
| DC 电阻(DCR)： | 最大 800 毫欧 |
| Q因子@频率： | 30 @ 7.96MHz |
| 频率 - 自谐振： | 100MHz |
| 材料 - 芯体： | 铁氧体 |
| 封装/外壳： | 1210（3225 公制） |
| 安装类型： | 表面贴装 |
| 包装： | 剪切带 (CT) |
| 频率 - 测试： | 7.96MHz |
| 其它名称： | 495-1732-1 |
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
8
10/12
相关PDF资料 |
PDF描述 |
|---|---|
| RNF-100-3/8-VT-SP | HEAT SHRINK TUBING |
| M1DXA-1636R | IDC CABLE - MKR16A/MC16M/X |
| M2MXT-1618J | IDC CABLE - MDM16T/MC16G/X |
| SDR0805-151KL | INDUCTOR UNSHIELD 150UH .58A SMD |
| EBC28DREF-S13 | CONN EDGECARD 56POS .100 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B82422T1222K000 | 制造商:EPCOS 功能描述:Ind General Purpose Chip Molded Wirewound 2.2uH 10% 7.96MHz 30Q-Factor Ferrite 320mA 1210 Blister T/R |
| B82422T1222K008 | 功能描述:FIXED IND 2.2UH 320MA 800 MOHM 制造商:epcos (tdk) 系列:SIMID 包装:带卷（TR） 零件状态:在售 类型:绕线 材料 - 磁芯:铁氧体 电感:2.2μH 容差:±10% 额定电流:320mA 屏蔽:无屏蔽 DC 电阻（DCR）:800 毫欧最大 不同频率时的 Q 值:30 @ 7.96MHz 频率 - 自谐振:100MHz 等级:AEC-Q200 工作温度:-55°C ~ 125°C 频率 - 测试:7.96MHz 安装类型:表面贴装 封装/外壳:2-SMD，J 形引线 供应商器件封装:- 大小/尺寸:0.126" 长 x 0.098" 宽（3.20mm x 2.50mm） 高度 - 安装（最大值）:0.083"（2.10mm） 标准包装:8,000 |
| B82422T1222K8 | 制造商:TDK-EPC 功能描述:Ind General Purpose Chip Molded Wirewound 2.2uH 10% 7.96MHz 30Q-Factor Ferrite 320mA 1210 Blister T/R 制造商:TDK-EPC 功能描述:SMT-INDUCTOR 1210 2.2UH 10% |
| B82422T1222X000 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:SMT inductors |
| B82422T1223 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:SMT inductors |
发布紧急采购，3分钟左右您将得到回复。