- 您现在的位置：买卖IC网 > PDF目录20789 > B82432T1333K (EPCOS Inc)INDUCTOR 33UH 400MA 1812 10% PDF资料下载
参数资料
| 型号： | B82432T1333K |
| 厂商： | EPCOS Inc |
| 文件页数： | 7/8页 |
| 文件大小： | 0K |
| 描述： | INDUCTOR 33UH 400MA 1812 10% |
| 产品目录绘图： | B824(2,3)2(C,T) Series Side B824(2,3)2(C,T) Series End |
| 标准包装： | 1 |
| 系列： | SIMID |
| 电感： | 33µH |
| 电流： | 400mA |
| 类型： | 铁氧体芯体 |
| 容差： | ±10% |
| 屏蔽： | 无屏蔽 |
| DC 电阻(DCR)： | 最大 1.2 欧姆 |
| Q因子@频率： | 10 @ 2.52MHz |
| 频率 - 自谐振： | 13MHz |
| 材料 - 芯体： | 铁氧体鼓形芯 |
| 封装/外壳： | 1812（4532 公制） |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 频率 - 测试： | 2.52MHz |
| 产品目录页面： | 1784 (CN2011-ZH PDF) |
| 其它名称： | 495-1761-6 |
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
7
10/12
相关PDF资料 |
PDF描述 |
|---|---|
| ISL97672AIRZ-T | IC LED DRVR LOW DIMMING 20QFN |
| JWS7515/A | PWR SUP 15.0V 5A SNG OUTPUT |
| JWS7548/A | POWER SUPL 75W 48V 1.6A ENCLOSED |
| USR 2-0808 14K OHM D 0.01% 1PPM | RES 14K OHM .6W .01% FOIL RADIAL |
| USR 2-0808 12K OHM D 0.01% 1PPM | RES 12K OHM .6W .01% FOIL RADIAL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B82432T1333K000 | 制造商:TDK-EPC 功能描述:INDUCTOR 33UH 400MA 10% FU 制造商:TDK-EPC 功能描述:INDUCTOR, 33UH, 400MA, 10%, FULL REEL 制造商:EPCOS 功能描述:Ind Chip Molded Wirewound 33uH 10% 2.52MHz 10Q-Factor Ferrite 400mA 1812 Blister T/R |
| B82432T1334K | 功能描述:固定电感器 330uH 120mA 10% 3.2x4.5mm SMD RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| B82432-T1334-K | 制造商:TDK-EPC 功能描述:High Current Inductor 制造商:TDK-EPC 功能描述:CHIP INDUCTOR, 330UH, 120MA, 10%, 4.1MHZ |
| B82432T1334K000 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:SMT inductors |
| B82432T1392K | 功能描述:固定电感器 3.9uH 850mA 10% 3.2x4.5mm SMD RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
发布紧急采购，3分钟左右您将得到回复。