- 您现在的位置：买卖IC网 > PDF目录15044 > B82464Z4683M (EPCOS Inc)INDUCTOR POWER 68UH 1.3A SMD PDF资料下载
参数资料
| 型号： | B82464Z4683M |
| 厂商： | EPCOS Inc |
| 文件页数： | 8/9页 |
| 文件大小： | 0K |
| 描述： | INDUCTOR POWER 68UH 1.3A SMD |
| 标准包装： | 1 |
| 系列： | B82464Z4 |
| 电感： | 68µH |
| 电流： | 1.3A |
| 电流 - 饱和： | 1.35A |
| 类型： | 铁氧体芯体 |
| 容差： | ±20% |
| 屏蔽： | 屏蔽 |
| DC 电阻(DCR)： | 最大 130 毫欧 |
| 材料 - 芯体： | 铁氧体 |
| 封装/外壳： | 0.394" L x 0.394" W x 0.189" H（10.00mm x 10.00mm x 4.80mm） |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 频率 - 测试： | 100kHz |
| 其它名称： | 495-3477-6 |
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
7
03/08
相关PDF资料 |
PDF描述 |
|---|---|
| DS1812-15 | IC ECONORESET 5V P-P 15% TO92-3 |
| LGU1K122MELZ | CAP ALUM 1200UF 80V 20% SNAP |
| AEB226M2EP44T-F | CAP ALUM 22UF 250V 20% SMD |
| ACC08DRTN-S93 | CONN EDGECARD 16POS DIP .100 SLD |
| HCC08DRYS-S734 | CONN EDGECARD 16POS DIP .100 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B82464Z4683M000 | 功能描述:固定电感器 SMT-INDUCTOR 10X10 68UH 1.2A RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| B82464Z4684M | 功能描述:固定电感器 SMT-INDUCTOR 10X10 680UH 0.38A RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| B82464Z4684M000 | 制造商:TDK-EPC 功能描述:INDUCTOR POWER 680UH 0.42A 20% 制造商:TDK-EPC 功能描述:INDUCTOR, POWER, 680UH, 0.42A, 20% |
| B82464Z4821M000 | 制造商:TDK-EPC 功能描述:INDUCTOR POWER 0.82UH 7.6A 20% |
| B82466G0102M000 | 制造商:TDK-EPC 功能描述:INDUCTOR POWER 2X2 1UH 1.05A 20% |
发布紧急采购，3分钟左右您将得到回复。