- 您现在的位置：买卖IC网 > PDF目录17461 > B82476A1222M (EPCOS Inc)INDUCTOR POWER 2.2UH 6.1A SMD PDF资料下载
参数资料
| 型号： | B82476A1222M |
| 厂商： | EPCOS Inc |
| 文件页数： | 7/7页 |
| 文件大小： | 0K |
| 描述： | INDUCTOR POWER 2.2UH 6.1A SMD |
| 产品目录绘图： | B82476 Series Top B82476 Series Side B82476 Series Footprint |
| 标准包装： | 1 |
| 系列： | B82476A1 |
| 电感： | 2.2µH |
| 电流： | 6.1A |
| 电流 - 饱和： | 7A |
| 类型： | 铁氧体芯体 |
| 容差： | ±20% |
| 屏蔽： | 无屏蔽 |
| DC 电阻(DCR)： | 最大 10.5 毫欧 |
| 材料 - 芯体： | 铁氧体 |
| 封装/外壳： | 0.510" L x 0.370" W x 0.200" H（12.95mm x 9.40mm x 5.08mm） |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 频率 - 测试： | 100kHz |
| 产品目录页面： | 1787 (CN2011-ZH PDF) |
| 其它名称： | 495-2687-6 |
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application . These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed .
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous) . Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time . The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products .
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI) .
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information will
be found on the Internet at www.epcos.com/trademarks.
7
06/12
相关PDF资料 |
PDF描述 |
|---|---|
| ATS073BSM-1 | CRYSTAL 7.3728 MHZ 18PF SMD |
| ATS122BSM-1 | CRYSTAL 12.288 MHZ 18 PF SMD |
| B82476A1473M | INDUCTOR POWER 47UH 1.8A SMD |
| 141A0-SZ5B-100-0DC | CABLE ASSY MDR 100POS M-M 1M |
| ATS147BSM-1 | CRYSTAL 14.7456 MHZ 18 PF SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B82476A1223M | 功能描述:固定电感器 22uH 2.7A 20 % 12.95x9.4mm SMD RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| B82476A1223M000 | 制造商:EPCOS 功能描述:Ind Power Wirewound 22uH 20% 100KHz Ferrite 2.7A Blister T/R |
| B82476A1224M | 功能描述:固定电感器 220uH 0.8A 20 % 12.95x9.4mm SMD RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
| B82476A1224M000 | 制造商:TDK-EPC 功能描述:INDUCTOR 220UH 800MA 20% F 制造商:EPCOS 功能描述:Ind Power Wirewound 220uH 20% 100KHz Ferrite 800mA Blister T/R |
| B82476A1332M | 功能描述:固定电感器 3.3uH 5.4A 20 % 12.95x9.4mm SMD RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm |
发布紧急采购，3分钟左右您将得到回复。