- 您现在的位置：买卖IC网 > PDF目录18557 > B82789C113N2 (EPCOS Inc)CHOKE DBL 11UH 300MA TIN SMD PDF资料下载
参数资料
| 型号： | B82789C113N2 |
| 厂商： | EPCOS Inc |
| 文件页数： | 10/11页 |
| 文件大小： | 0K |
| 描述： | CHOKE DBL 11UH 300MA TIN SMD |
| 标准包装： | 1 |
| 滤波器类型： | 数据，信号线 |
| 线路数： | 2 |
| 电感： | 11µH |
| 电流： | 300mA |
| DC 电阻(DCR)： | 250 毫欧 |
| 安装类型： | 表面贴装 |
| 尺寸/尺寸： | 0.205" L x 0.126" W（5.20mm x 3.20mm） |
| 高度（最大）： | 0.118"（3.00mm） |
| 封装/外壳： | 水平式，4 L 形引线 |
| 工作温度： | -55°C ~ 125°C |
| 包装： | 标准包装 |
| 其它名称： | 495-4409-6 |
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
10
10/08
相关PDF资料 |
PDF描述 |
|---|---|
| DPPM10S33K-F | CAP FILM 0.033UF 1KVDC RADIAL |
| HR12-SC-TP | EXTRACTION TOOL - FEMALE SOCKETS |
| DME2W3P3K-F | CAP FILM 3.3UF 250VDC RADIAL |
| QXK2G155KTPTZH | CAP FILM 1.5UF 400VDC RADIAL |
| ASFLMPC-133.333MHZ-LR-T | OSC 133.333 MHZ CMOS MEMS SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B82789C223H1 | 制造商:TDK 功能描述:INDUCTOR 制造商:TDK Epcos 功能描述:CHOKE DBL 22UH 250MA GOLD SMD 制造商:TDK EPCOS 功能描述:SMT-DL-CHOKE 1812 2 X 22 UH 30% |
| B82789C223H2 | 制造商:TDK Epcos 功能描述:CHOKE DBL 22UH 250MA TIN SMD |
| B82789C223N1 | 制造商:TDK Epcos 功能描述: 制造商:TDK Epcos 功能描述:CHOKE DBL 22UH 250MA GOLD SMD |
| B82789C223N2 | 功能描述:共模滤波器/扼流器 22uH 250mA 580mohms RoHS:否 制造商:TDK 电感: 阻抗:35 Ohms 容差: 最大直流电流:0.1 A 最大直流电阻:1.5 Ohms 自谐振频率: Q 最小值: 工作温度范围:- 25 C to + 85 C 端接类型:SMD/SMT 封装 / 箱体:0302 (0806 metric) 系列:TCE |
| B82789C513H1 | 制造商:TDK-EPC 功能描述:CHOKE DBL 51UH 250MA GOLD SMD |
发布紧急采购，3分钟左右您将得到回复。