- 您现在的位置：买卖IC网 > PDF目录21726 > B84299C1101E3 (EPCOS Inc)FILTER POWER LINE 100A 250/440V PDF资料下载
参数资料
| 型号： | B84299C1101E3 |
| 厂商： | EPCOS Inc |
| 文件页数： | 2/21页 |
| 文件大小： | 0K |
| 描述： | FILTER POWER LINE 100A 250/440V |
| 标准包装： | 1 |
| 系列： | B84299 |
| 滤波器类型： | 电源线 |
| 电压 - 额定： | 250V，440V |
| 电流： | 100A |
| 安装类型： | 底座安装 |
| 端接类型： | 接线柱接片 |
Filters for power lines
16 to 150 A, 100 dB from 14 kHz
B84299*B003
B84299*E003
2- and 4-line-filters
16 to 150 A
Multi-stage
Stopband attenuation 14 kHz to 40 GHz
Features
General-purpose use through design with separate lines without intercoupling
Use of single chokes. Thus the insertion loss values are not reduced under all operating cur-
rent conditions and not when operated with artificial mains networks (AMN) or other equipment
with high leakage currents.
Insertion loss to CISPR 17
Design
The electrical components are incorporated in an RF-tight case of stainless steel. The cables
enter through glands. The RF-tight termination of the openings is produced by specially shaped
lids.
The conductors and equipment grounding conductor are connected by threaded bolts. The sur-
face around the fixing holes is left as bare metal (unpainted) to ensure good RF contact with met-
al surfaces (chassis, ground).
Protective measures (grounding)
The high capacitances between the lines and ground require special protective measures. If there
are no product-specific requirements, protection with a secondary ground wire (cross section min.
10 mm 2 ) in accordance with EN 50178 is necessary. For this purpose the filter case have con-
necting bolts at each end.
Resistors are incorporated in the filter to discharge capacitors after turn-off.
Scope of supply
Filters are supplied complete with all parts required for RF-tight installation (fixing screws,
flanges, RF gaskets, cable glands) and installation instructions.
Installation
No welding is needed on the shielding wall, so any subsequent installation is quite simple.
Accessories and special versions
RF-tight flexible connector fittings are available for installation spaced away from the shielding
wall. Filters with an EMP protection add-on for surge currents up to 100 kA per line are available
on request. To match requirements, filters can be supplied with different kinds of EMC or shield-
ing cable glands.
Tests
All filters are 100% tested and the results are archived under a filter's serial number. If required, a
test report can be generated for the serial number.
2
相关PDF资料 |
PDF描述 |
|---|---|
| 150153K1000FC | CAP FILM 0.015UF 1KVDC AXIAL |
| 150393K630EC | CAP FILM 0.039UF 630VDC AXIAL |
| 150333J630EC | CAP FILM 0.033UF 630VDC AXIAL |
| ST5ETW502 | TRIMMER 5K OHM 0.25W SMD |
| 150274K63BB | CAP FILM 0.27UF 63VDC AXIAL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| B84299C1151E001 | 功能描述:电源线滤波器 FILTER 4x150A 440/250V 150kHz RoHS:否 制造商:EPCOS 电压额定值:277 VAC 电流额定值:100 A 安装风格:Chassis 端接类型:Screw |
| B84299C1151E003 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:Filters for Power Lines |
| B84299C1151E1 | 制造商:TDK EPCOS 功能描述:Filter 4x150A 440/250V 150kHz |
| B84299C1151E3 | 功能描述:电源线滤波器 4X150A 440/250V 4-LINE RoHS:否 制造商:EPCOS 电压额定值:277 VAC 电流额定值:100 A 安装风格:Chassis 端接类型:Screw |
| B84299C1160B001 | 功能描述:电源线滤波器 FILTER 2x16A 440/250V RoHS:否 制造商:EPCOS 电压额定值:277 VAC 电流额定值:100 A 安装风格:Chassis 端接类型:Screw |
发布紧急采购，3分钟左右您将得到回复。