参数资料
| 型号： | BCM48BF120M300A00 |
| 厂商： | Vicor Corporation |
| 文件页数： | 9/18页 |
| 文件大小： | 0K |
| 描述： | V.I CHIP BCM BUS CONVERTER |
| 应用说明： | Factorized Power Architecture and V-I Chips |
| 产品培训模块： | VI Chip Bus Converter Modules |
| 标准包装： | 1 |
| 系列： | V-I Chip™, BCM™ |
| 类型： | 总线转换器模块 |
| 输出数： | 1 |
| 电压 - 输入（最小）： | 38V |
| 电压 - 输入（最大）： | 55V |
| 输出电压： | 12V |
| 电流 - 输出（最大）： | 25A |
| 电源（瓦） - 制造商系列： | 300W |
| 电压 - 隔离： | 2.25kV（2250V） |
| 应用： | 商用 |
| 特点： | 具有远程开/关功能和 UVLO |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 模块 |
| 尺寸/尺寸： | 1.28" L x 0.87" W x 0.26" H（32.5mm x 22.0mm x 6.7mm） |
| 包装： | 托盘 |
| 工作温度： | -55°C ~ 125°C |
| 效率： | 96% |
| 电源（瓦特）- 最大： | 300W |
| 重量： | 0.032 磅（14.51g） |
than 60 Ω .
BCM 48 B x 120 y 300
7.0 USING THE CONTROL SIGNALS PC, TM
Primary Control (PC) pin can be used to accomplish the
following functions:
? Logic enable and disable for module: Once Ton1 time has
been satisfied, a PC voltage greater than Vpc_en will cause
the module to start. Bringing PC lower than Vpc_dis will
cause the module to enter standby.
? Auxiliary voltage source: Once enabled in regular
operational conditions (no fault), each BCM ? module
PC provides a regulated 5 V, 3.5 mA voltage source.
? Synchronized start up: In an array of parallel modules, PC
pins should be connected to synchronize start up across
units. This permits the maximum load and capacitance
to scale by the number of paralleled modules.
? Output disable: PC pin can be actively pulled down in order
to disable the module. Pull down impedance shall be lower
? Fault detection flag: The PC 5 V voltage source is internally
turned off as soon as a fault is detected.
? Note that PC can not sink significant current during a fault
condition. The PC pin of a faulted module will not cause
interconnected PC pins of other modules to be disabled.
Temperature Monitor (TM) pin provides a voltage
proportional to the absolute temperature of the converter
control IC.
It can be used to accomplish the following functions:
? Monitor the control IC temperature: The temperature in
Kelvin is equal to the voltage on the TM pin scaled
by 100. (i.e. 3.0 V = 300 K = 27 oC). If a heat sink is applied,
TM can be used to protect the system thermally.
? Fault detection flag: The TM voltage source is internally
turned off as soon as a fault is detected. For system
monitoring purposes microcontroller interface faults are
detected on falling edges of TM signal.
BCM ? Bus Converter
Page 9 of 18
Rev 1.4
12/2012
vicorpower.com
800 735.6200
相关PDF资料 |
PDF描述 |
|---|---|
| BCM48BF040M200A00 | V.I CHIP BCM BUS CONVERTER |
| BCM48BF030M210A00 | V.I CHIP BCM BUS CONVERTER |
| B048F096M24 | BCM BUS CONVERTER 9.60V 240W |
| B048F080M24 | BCM BUS CONVERTER 8V 240W |
| B048F060M24 | BCM BUS CONVERTER 6V 240W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BCM48BF120T300A00 | 功能描述:CONVERTER BUS 12V OUT 300W SMD RoHS:是 类别:电源 - 板载 >> DC DC 转换器（分解式） 系列:V-I Chip™, BCM™ 应用说明:Factorized Power Architecture and V-I Chips 产品培训模块:VI Chip Bus Converter Modules 标准包装:1 系列:V-I Chip™, BCM™ 类型:总线转换器模块 输出数:1 电压 - 输入（最小）:330V 电压 - 输入（最大）:365V 输出电压:12.5V 电流 - 输出（最大）:24A 电源（瓦） - 制造商系列:300W 电压 - 隔离:4.242kV（4242V） 应用:商用 特点:具有远程开/关功能和 UVLO 安装类型:通孔 封装/外壳:模块 尺寸/尺寸:1.28" L x 0.87" W x 0.26" H（32.5mm x 22.0mm x 6.7mm） 包装:托盘 工作温度:-55°C ~ 125°C 效率:95.3% 电源（瓦特）- 最大:300W 重量:0.031 磅（14.06g） |
| BCM48BF160M240A00 | 制造商:Vicor Corporation 功能描述:BCM BUS CONVERTER 16V 240W |
| BCM48BF160T240A00 | 功能描述:BCM BUS CONVERTER 16V 240W 制造商:vicor corporation 系列:VI Chip? BCM? 包装:托盘 零件状态:在售 类型:总线转换器模块 输出数:1 电压 - 输入（最小值）:38V 电压 - 输入（最大值）:55V 电压 - 输出 1:16V 电压 - 输出 2:- 电压 - 输出 3:- 电流 - 输出（最大值）:15A 功率（W）:240W 电压 - 隔离:2.25kV 应用:ITE（商业） 特性:OCP，OTP，SCP，UVLO 工作温度:-40°C ~ 125°C 效率:94% 安装类型:表面贴装 封装/外壳:模块 大小/尺寸:1.28" 长 x 0.87" 宽 x 0.26" 高（32.5mm x 22.0mm x 6.7mm） 标准包装:1 |
| BCM48BF240M300A00 | 制造商:Vicor Corporation 功能描述:BCM BUS CONVERTER 24V 300W |
| BCM48BF240T300A00 | 制造商:Vicor Corporation 功能描述:BCM BUS CONVERTER 24V 300W |
发布紧急采购，3分钟左右您将得到回复。