参数资料
型号: BD6088GUL-E2
厂商: Rohm Semiconductor
文件页数: 11/54页
文件大小: 0K
描述: IC LED DRIVER BKLT 36VCSP50L3
标准包装: 2,500
恒定电流:
拓扑: 切换式电容器(充电泵)
输出数: 10
内部驱动器:
类型 - 主要: 背光
频率: 800kHz ~ 1.2MHz
电源电压: 2.7 V ~ 5.5 V
输出电压: 5.5V
安装类型: 表面贴装
封装/外壳: 36-VCSP
供应商设备封装: 36VCSP50L3
包装: 带卷 (TR)
工作温度: -30°C ~ 85°C
BD6088GUL
Technical Note
? Writing protocol
A register address is transferred by the next 1 byte that transferred the slave address and the write-in command. The 3rd
byte writes data in the internal register written in by the 2nd byte, and after 4th byte or, the increment of register address is
carried out automatically. However, when a register address turns into the last address, it is set to 00h by the next
transmission. After the transmission end, the increment of the address is carried out.
S X X X X X X X 0 A A7 A6 A5 A4 A3 A2 A1 A0 A D7 D6 D5 D4 D3 D2 D1 D0 A
*1
*1
D7 D6 D5 D4 D3 D2 D1 D0 A P
slave address
R/W=0(write)
register address
DATA
register address
increment
DATA
register address
increment
from master to slave
from slave to master
A=acknowledge(SDA LOW)
A=not acknowledge(SDA HIGH)
S=START condition
P=STOP condition
*1: Write Timing
? Reading protocol
It reads from the next byte after writing a slave address and R/W bit. The register to read considers as the following address
accessed at the end, and the data of the address that carried out the increment is read after it. If an address turns into the
last address, the next byte will read out 00h. After the transmission end, the increment of the address is carried out.
S X X X X X X X
slave address
1 A D7 D6 D5 D4 D3 D2 D1 D0 A
DATA
D7 D6 D5 D4 D3 D2 D1 D0 A P
DATA
R/W=1(read)
from master to slave
from slave to master
register address
increment
A=acknowledge(SDA LOW)
A=not acknowledge(SDA HIGH)
S=START condition
P=STOP condition
register address
increment
? Multiple reading protocols
After specifying an internal address, it reads by repeated START condition and changing the data transfer direction. The
data of the address that carried out the increment is read after it. If an address turns into the last address, the next byte will
read out 00h. After the transmission end, the increment of the address is carried out.
S X X X X X X X 0 A A7 A6 A5 A4 A3 A2 A1 A0 A Sr X X X X X X X 1 A
slave address
register address
slave address
R/W=0(write)
D7 D6 D5 D4 D3D2 D1D0 A
DATA
register address
increment
from master to slave
from slave to master
R/W=1(read)
D7D6 D5D4D3D2D1D0 A P
DATA
register address
increment
A=acknowledge(SDA LOW)
A=not acknowledge(SDA HIGH)
S=START condition
P=STOP condition
Sr=repeated START condition
As for reading protocol and multiple reading protocols, please do A(not acknowledge) after doing the final reading operation.
It stops with read when ending by A(acknowledge), and SDA stops in the state of Low when the readingdata of that time is
0. However, this state returns usually when SCL is moved, data is read, and A(not acknowledge)is done.
www.rohm.com
? 2011 ROHM Co., Ltd. All rights reserved.
11/51
2011.04 - Rev.A
相关PDF资料
PDF描述
BD6142AMUV-E2 IC LED DRIVER SGL STEP UP 24QFN
BD6581GU-E2 IC LED DVR WHT BCKLGHT VCSP85H2
BD6583MUV-AE2 IC LED DRIVER WHIT BCKLGT 24VQFN
BD6586MUV-E2 IC LED DRVR WHITE BCKLGT 24-VQFN
BD6592MUV-E2 IC LED DRVR WHITE BCKLGT 24-VQFN
相关代理商/技术参数
参数描述
BD60910GU 制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit
BD60910GU_11 制造商:ROHM 制造商全称:Rohm 功能描述:White backlight LED Drivers for Small to Medium LCD Panels (Switching Regulator Type)
BD60910GU-E2 制造商:ROHM Semiconductor 功能描述:IC;MULTI BACLIGHT LED DRIV; VCSPH3 PKG - Tape and Reel 制造商:ROHM Semiconductor 功能描述:IC LED DRIVER W/DIM VCSP85H3 制造商:ROHM Semiconductor 功能描述:IC LED DRIVER MULTI BACKLIGHT
BD6091GU 制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit
BD6091GU_11 制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit