- 您现在的位置：买卖IC网 > Datasheet目录316 > BH-ADP-ISO20 (Blackhawk)ISOLATION ADAPTER 20-PIN TI JTAG Datasheet资料下载
参数资料
| 型号： | BH-ADP-ISO20 |
| 厂商： | Blackhawk |
| 文件页数： | 2/2页 |
| 文件大小： | 0K |
| 描述： | ISOLATION ADAPTER 20-PIN TI JTAG |
| 标准包装： | 1 |
| 系列： | Blackhawk™ |
| 模块/板类型： | 隔离型适配器 |
| 适用于相关产品： | TI 开发板 |
1 14 and 20-pin Configurations
The Isolation Adapters described below (see figures 1 to 4) allow an emu-
lator with the standard TI 14-pin or compact 20-pin JTAG socket (EMU) to
connect to a target board with the corresponding JTAG header (TGT).
Use a pin converter if your emulator and target board do not have the
same JTAG connections.
Use of this adapter will isolate floating grounds and minimize current
spikes from damaging the emulator, the target, and the development ma-
chine.
Typical Connections 2
Using this adapter provides backwards compatibility to standard debug con-
nections and does not perform any processing or contain any on-board logic.
It is strictly a Isolation Adapter, routing only pins 1-14, or 1-20 on relative
adapter, and can be used with XDS510? and XDS560?-class emulators
with a 14-pin or 20-pin socket connector.
Figure 5 shows the connection orientation of the Isolation Adapter between
an emulator cable on top and a header on a target board.
SIDE VIEW
Emulator Cable
Figure 1
Top view of BH-ADP-ISO14
Standard TI 14-pin
JTAG Header
Connect to emulator’s
14-pin socket connector.
(EMU)
(pin 6 keyed)
(TGT)
Figure 2
Top view of BH-ADP-ISO20
Standard TI 14-pin
JTAG Socket
Connect this end to target
board with TI 14-pin header.
Emulator
Connector
Target
Isolation Adapter
Figure 3
Connector edge views of the BH-ADP-ISO14 Adapter
Connector
Figure 5
Target Board
Connection
Compact TI 20-pin
JTAG Header
Connect to emulator’s
20-pin socket connector.
(EMU)
(pin 6 keyed)
Figure 4
(TGT)
Compact TI 20-pin
JTAG connector
Connect this end to target
board with 20-pin TI header.
Side view of the Isolation adapter connection orientation
WARNING
Caution should be exercised in connecting these adapters to the JTAG emulator and
the target JTAG header. Pay special attention to the orientation and keying and pin
outs. Be careful to connect with the correct orientation. These adapters are not in-
tended to be hot pluggable. Unplug power from all sources prior to connect or discon-
nect.
Connector edge views of the BH-ADP-ISO20 Adapter
2
3
相关PDF资料 |
PDF描述 |
|---|---|
| BH-GANG2000 | GANG2000 PROGRAMMER TI 32BIT MCU |
| BH-PCI-560 | PCI560 JTAG EMULATOR FOR TI DSP |
| BH-USB-100V2-ARM | USB100V2 ARM CTLR JTAG TI DSP |
| BH-USB-100V2D | USB100V2 JTAG CTLR MOD D TI DSP |
| BH-USB-2000 | USB2000 JTAG CTLR FOR TI DSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BH-ADP-ISO-20 | 功能描述:插座和适配器 BH Isolation Adapter 20-pin RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x |
| BH-ADP-MIPI60-BUFBRD | 功能描述:插座和适配器 XDS560v2 BUFFER ADAPTER BOARD RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x |
| BH-ADP-MIPI60e-14t_TI | 功能描述:插座和适配器 ADAPTER 60P MIPI TO 14P TI JTAG RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x |
| BH-ADP-MIPI60e-20t_ARM | 功能描述:插座和适配器 ADAPTER 60P MIPI TO 20P ARM JTAG RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x |
| BH-ADP-MIPI60e-20t_cTI | 功能描述:插座和适配器 ADAPTER 60P MIPI TO 20P cTI RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x |
发布紧急采购，3分钟左右您将得到回复。