参数资料
| 型号： | BH2223FV-E2 |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 10/10页 |
| 文件大小： | 0K |
| 描述： | IC CONV D/A 8BIT 10CH SSOP-B16 |
| 标准包装： | 1 |
| 位数： | 8 |
| 数据接口： | 串行 |
| 转换器数目： | 10 |
| 电压电源： | 单电源 |
| 功率耗散（最大）： | 400mW |
| 工作温度： | -20°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 16-SSOPB |
| 包装： | 标准包装 |
| 输出数目和类型： | 10 电压，单极 |
| 采样率（每秒）： | * |
| 其它名称： | BH2223FV-E2-DKR BH2223FV-E2-DKR-ND BH2223FV-E2DKR |
Datasheet
Notice - GE
Rev.002
2014 ROHM Co., Ltd. All rights reserved.
Precautions Regarding Application Examples and External Circuits
1.
If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2.
You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise your own independent verification and judgment in the use of such information
contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportation
1.
Product performance and soldered connections may deteriorate if the Products are stored in the places where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommended by ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2.
Even under ROHM recommended storage condition, solderability of products out of recommended storage time period
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommended storage time period.
3.
Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive stress applied when dropping of a carton.
4.
Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
QR code printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products please dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since our Products might fall under controlled goods prescribed by the applicable foreign exchange and foreign trade act,
please consult with ROHM representative in case of export.
Precaution Regarding Intellectual Property Rights
1.
All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any
other rights of any third party regarding such information or data. ROHM shall not be in any way responsible or liable
for infringement of any intellectual property rights or other damages arising from use of such information or data.:
2.
No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the information contained in this document.
Other Precaution
1.
This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2.
The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3.
In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including but not limited to, the development of mass-destruction
weapons.
4.
The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
相关PDF资料 |
PDF描述 |
|---|---|
| BH2226FV-FE2 | IC DAC 8BIT 8-CHAN SSOP-B16 |
| BH2228FV-E2 | IC DAC 8BIT 6-CHAN SSOP-B14 |
| BQ4285EP | IC RTC W/114X8 NVSRAM 24-DIP |
| BQ4847YMT | IC RTC W/NVSRAM CONTROL T-MOD |
| BU2280FV-E2 | IC CLOCK GEN DVD-VIDEO SSOP-B24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BH2223GLU-E2 | 功能描述:数模转换器- DAC TUNING D/A CONVERTER RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| BH2226F | 制造商:ROHM 制造商全称:Rohm 功能描述:Standard 8bit 8ch Type D/A Converters |
| BH2226F-E2 | 功能描述:8 Bit Digital to Analog Converter 8 16-SOP 制造商:rohm semiconductor 系列:- 包装:剪切带（CT） 零件状态:有效 位数:8 数模转换器数:8 建立时间:100μs 输出类型:Voltage - Buffered 差分输出:无 数据接口:SPI 参考类型:- 电压 - 电源，模拟:2.7 V ~ 5.5 V 电压 - 电源，数字:2.7 V ~ 5.5 V INL/DNL（LSB）:±1.5（最大），±1（最大） 架构:R-2R 工作温度:-20°C ~ 85°C 封装/外壳:16-SOIC（0.173"，4.40mm 宽） 供应商器件封装:16-SOP 标准包装:1 |
| BH2226FV | 制造商:ROHM 制造商全称:Rohm 功能描述:Expansion port function built in 8 Bit8chD/A converter |
| BH2226FV_09 | 制造商:ROHM 制造商全称:Rohm 功能描述:Standard 8bit 8ch Type D/A Converters |
发布紧急采购，3分钟左右您将得到回复。