参数资料
| 型号： | BH6172GU-E2 |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 8/19页 |
| 文件大小： | 0K |
| 描述： | IC PMIC DC/DC 1CH LDO 5CH |
| 标准包装： | 1 |
| 应用： | 手持/移动设备 |
| 电源电压： | 2.2 V ~ 5.5 V |
| 工作温度： | -35°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-VFBGA，24-CSPBGA |
| 供应商设备封装： | 24-VCSP |
| 包装： | 标准包装 |
| 其它名称： | BH6172GU-E2DKR |
BH6172GU
Technical Note
The I C compatible synchronous serial interface provides access to programmable functions and register on the device.
● I 2 C Bus Interface
2
This protocol uses a two-wire interface for bi-directional communications between the LSI’s connected to the bus.
The two interface lines are the Serial Data Line (DATA), and the Serial Clock Line (CLK). These lines should be connected to
the power supply DVDD by a pull-up resistor, and remain high even when the bus is idle.
1. Start and Stop Conditions
When CLK is high, pulling DATA low produces a start condition and pulling DATA high produces a stop condition.
Every instruction is started when a start condition occurs and terminated when a stop condition occurs. During read, a stop
condition causes the read to terminate and the chip enters the standby state. During write, a stop condition causes the
fetching of write data to terminate, after which writing starts automatically. Upon the completion of writing, the chip enters
the standby state. Two or more start conditions cannot be entered consecutively.
CLK
DATA
t SU.STA t HD.STA
Start condition
t SU.STO
Stop condition
Fig.3 I C Start, Stop condition
2
2. Data transmission
Data on the DATA input can be modified while CLK is low. When CLK is high, modifying the DATA input means a start or
stop condition.
CLK
DATA
t SU.DAT
Modify data
t HD.DAT
Modify data
Fig.4 I C Data Transmission Timing
2
All other acknowledge, write, and read timings all conform to the I 2 C standard.
3. Device addressing
The device address for this device is “1001111”.
Device address
Read/write instruction
code
1
0
0
1
1
1
1
R/W
Fig.5 I C device address
MSB
2
LSB
www.rohm.com
? 2011 ROHM Co., Ltd. All rights reserved.
8/16
2011.03 - Rev.A
相关PDF资料 |
PDF描述 |
|---|---|
| BP5122 | IC REG BUCK -12V 0.1A 8SIP |
| BP5223 | IC REG BUCK 5V 0.15A SIP5 |
| BPS8B21FLD2C0Z1LF | DINIDC SIDEPIERCE-053CNR |
| BPS8B96FLD200L9LF | DINIDC SIDEPIERCE LF CNR |
| BPS8B96KKD200ECLF | DINIDC SIDEPIERCE-101CNR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BH6173GUL | 制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit |
| BH6173GUL_11 | 制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit |
| BH6173GUL-E2 | 功能描述:IC PMIC DC/DC 1CH LDO 3CH RoHS:是 类别:集成电路 (IC) >> PMIC - 电源管理 - 专用 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 应用:热电冷却器 电流 - 电源:- 电源电压:3 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.173"，4.40mm 宽）裸露焊盘 供应商设备封装:28-TSSOP 裸露焊盘 包装:管件 产品目录页面:1410 (CN2011-ZH PDF) |
| BH6176GU | 制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit |
| BH6176GU_11 | 制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit Power Management LSI for MultiMedia LSI on Cellular |
发布紧急采购，3分钟左右您将得到回复。