参数资料
| 型号： | BH76112HFV-TR |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 6/11页 |
| 文件大小： | 0K |
| 描述： | IC DRIVER VIDEO LPF HVSOF6 |
| 标准包装： | 3,000 |
| 应用： | 驱动器 |
| 电路数： | 1 |
| 电流 - 电源： | 7mA |
| 电压 - 电源，单路/双路(±)： | 2.6 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-HVSOF |
| 供应商设备封装： | HVSOF6 |
| 包装： | 带卷 (TR) |
Technical Note
4/8
BH76106HFV, BH76109HFV, BH76112HFV, BH76206HFV
www.rohm.com
2009.03 - Rev.A
2009 ROHM Co., Ltd. All rights reserved.
(9) Standby pin
When the standby pin is open, the LSI is in a standby state.
Since adding a voltage greater than Vcc at the standby pin turns a protective diode ON, make this at most Vcc+0.2 V
(no greater than Vcc+VF).
(See Fig. 4)
Applying a voltage to the standby pin when the voltage Vcc is not being
applied also turns the protective diode ON, so do not apply a voltage.
Responsiveness of Standby Control
STBY
VIN
(100% color bar signal)
VOUT
Fig.5 Standby Response Characteristic
Fig.6 Standby Response Characteristic
※In relation to IC startup, this is practically 0
μs.
※In relation to IC shutdown, this is after approximately 2
μs.
Noise also does not occur when toggling the switch.
(10) Input coupling capacitor
Making the input coupling capacitor a value less than 0.1
μF (the recommended value) increases SAG. Determine
the capacitance of the input capacitor used after taking into consideration the relationship of SAG to input coupling
capacitor.
Fig.7
Moreover, if you make the input coupling capacitor a value greater than 0.1
μF (the recommended value), it may take
time for the output waveform to stabilize.
Decide the value of the coupling capacitor used by referring to the results
shown in Fig. 10.
Approx. 0.7V
Vcc+VF
Diode ON
Vcc
Fig.4
0
10
20
30
40
50
60
0.00
0.01
0.10
1.00
INPUT COUPLING CAPACITOR (
μF)
SAG(
m
V)
Relationship of SAG to Input Coupling Capacitor
↑
↓△V
ΔV : SAG
Vin
VOUT
0.1μF
Monitor
Vary the value of an
external capacitor and
check the bounds of the
output waveform
100μF
22μF
75Ω
VSAG
75Ω
Cin
1V
①
Vin
VOUT
Monitor
100μF
22μF
75Ω
VSAG
75Ω
③
②
Cin
STBY
Fig.8
Fig.9
(Startup characteristic, Vcc = 3.0 V)
(Shut down characteristic, Vcc = 3.0 V)
相关PDF资料 |
PDF描述 |
|---|---|
| VI-B1N-MU-S | CONVERTER MOD DC/DC 18.5V 200W |
| VI-B1J-MU-S | CONVERTER MOD DC/DC 36V 200W |
| VI-B11-MU-S | CONVERTER MOD DC/DC 12V 200W |
| VE-B1W-MU-S | CONVERTER MOD DC/DC 5.5V 200W |
| VI-B5L-MU-S | CONVERTER MOD DC/DC 28V 200W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BH7611FV | 制造商:ROHM 制造商全称:Rohm 功能描述:Multifunction 3 Outputs Video Drivers |
| BH7612FV | 制造商:ROHM 制造商全称:Rohm 功能描述:Multifunction 3 Outputs Video Drivers |
| BH7616HFV | 制造商:ROHM 制造商全称:Rohm 功能描述:Silicon Monolithic Integrated Circuit |
| BH7616HFV-TR | 制造商:ROHM Semiconductor 功能描述:BH7616HFV-TR - Tape and Reel 制造商:ROHM Semiconductor 功能描述:Cut Tape 制造商:ROHM Semiconductor 功能描述:IC VIDEO DVR LPF MOBIE 6-HVSOF |
| BH76206HFV | 制造商:ROHM 制造商全称:Rohm 功能描述:3V operation Video driver (with LPF for mobile applications) |
发布紧急采购，3分钟左右您将得到回复。