- 您现在的位置：买卖IC网 > PDF目录18982 > BMK60000 (Red Lion Controls)OPEN BASE MOUNT KIT CUB4//DT8 PDF资料下载
参数资料
| 型号： | BMK60000 |
| 厂商： | Red Lion Controls |
| 文件页数： | 2/2页 |
| 文件大小： | 0K |
| 描述： | OPEN BASE MOUNT KIT CUB4//DT8 |
| 标准包装： | 1 |
| 系列： | * |
| 其它名称： | RLC147 |
INSTALLATION
BMK7/BMK7A - Closed Base Mount
Before attaching the BMK7/BMK7A to the panel or frame, it is
recommended to wire and mount the unit to ensure good electrical
connections. The following steps outline the most common sequence for
installing a unit with an MLPS attached.
1. Install the grommets (provided in the accessory bag) in the holes
in the base mount.
2. Slide the panel gasket over the rear of the unit to the back
of the bezel.
3. Remove the common and V+ screw terminals
from the rear of the unit (save for later
use), and replace them with the
hex drive stand-offs with
round washers (supplied
with the MLPS).
4. Assemble nut fastener
and mounting screw
onto both sides of the
mounting clip. The tip
of the screw should not
project from the hole in
mounting clip.
5. Route the wires from
the grommets, through
the mounting clip, into
the rear of the base mount
and out the front.
6. Connect the wires necessary for the application to the unit.
7. Install the unit through the opening in the front of the base mount until the
bezel flange makes contact.
8. Slide the mounting clip over the rear of the unit until the mounting clip is
against the inside of the base mount. The mounting clip has latching
features which engage into mating features on the unit’s housing.
Note: It is necessary to hold the unit in place when sliding the mounting
clip into position.
9. Alternately tighten each screw to ensure uniform gasket compression.
10. Connect AC power to the terminal block of the MLPS.
Note: Make sure the AC selector switch is set to the appropriate position
before applying power to the unit.
11. Mount the MLPS and optional sensor wires needed to the stand-offs using
the screw terminal from the unit with the supplied square washers.
12. Mount the base mount enclosure to the panel or frame as application
requires. Four bolts and nuts are provided with the Base Mount Kit.
ORDERING INFORMATION
MODEL NO
BMK
DESCRIPTION
OPEN BASE MOUNT KIT
CLOSED BASE MOUNT KIT (DT8, CUB4)
CLOSED BASE MOUNT KIT (CUB5)
PART NUMBER
BMK60000
BMK70000
BMK7A000
For More information on Pricing, Enclosures & Panel Mount Kits refer to
the RLC Catalog or contact your local RLC Distributor.
Red Lion Controls AP
Red Lion Controls
20 Willow Springs Circle
York PA 17406
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
Red Lion Controls BV
Printerweg 10
NL - 3821 AD Amersfoort
Tel +31 (0) 334 723 225
Fax +31 (0) 334 893 793
Unit 101, XinAn Plaza
Building 13, No.99 Tianzhou Road
ShangHai, P.R. China 200223
Tel +86 21 6113-3688
Fax +86 21 6113-3683
相关PDF资料 |
PDF描述 |
|---|---|
| 0638320602 | REAR COVER |
| LSR1A | SW LIMIT SIDE ROTARY SPDT SNAP |
| 0035.9663 | HOLDER W/OUT LED 2PLACE 3MM |
| 0035.9616 | HOLDER WITHOUT LED 3MM 7PLACE |
| LSA1A | SWITCH SIDE-ROTRY SNAP SPDT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BMK70000 | 功能描述:BASE MOUNT KIT CUB4/DT8 W/MLPS RoHS:是 类别:工业控制，仪表 >> 配件 系列:* 标准包装:1 系列:Aero-Motive® 130117 附件类型:拖车带 适用于相关产品:标准盒式跟踪系统 其它名称:WM6183 |
| BMK7A000 | 功能描述:BASE MOUNT MLPS RoHS:是 类别:工业控制，仪表 >> 配件 系列:* 标准包装:1 系列:Aero-Motive® 130117 附件类型:拖车带 适用于相关产品:标准盒式跟踪系统 其它名称:WM6183 |
| BMK80000 | 制造商:Red Lion Controls 功能描述:BASE MOUNT KIT CUB7 制造商:Red Lion Controls 功能描述:BASE MOUNT KIT; Accessory Type:Base Mount Kit; For Use With:Redlion CUB7 Series Panel Meters ;RoHS Compliant: NA |
| BMK90000 | 制造商:Red Lion Controls 功能描述:BASE MOUNT KIT, DIN RAIL MOUNT PAX 制造商:Red Lion Controls 功能描述:PAX BASE MOUNT KIT 制造商:Red Lion Controls 功能描述:DIN RAIL BASE MOUNT KIT; Accessory Type:Base Mount Kit; For Use With:Redlion PAX Series Panel Meters ;RoHS Compliant: Yes |
| BMKCS1 | 功能描述:控制开关 OPERATING MECHANISM FOR FLANGE CABLE DIS RoHS:否 制造商:Omron Industrial 控制类型:Emergency Stop 触点额定值:5 A at 125 VAC 触点形式:1 Form B (SPST-NC) 电压额定值: 电流额定值: 执行器:Pushbutton 照明:N 安装风格: |
发布紧急采购，3分钟左右您将得到回复。