- 您现在的位置：买卖IC网 > PDF目录223464 > BU-61865F4-192 (DATA DEVICE CORP) 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 PDF资料下载
参数资料
| 型号： | BU-61865F4-192 |
| 厂商： | DATA DEVICE CORP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQFP72 |
| 封装： | 1 X 1 INCH, 0.155 INCH HEIGHT, FP-72 |
| 文件页数： | 11/56页 |
| 文件大小： | 321K |
| 代理商： | BU-61865F4-192 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页
19
8
TABLE 37. CONDITION CODES
BIT
CODE
LT/GP0
EQ/GP1
RETRY0
RETRY1
RETRY0
RETRY01
D
E
GP2
GP3
GP4
GP5
GP6
GP7
NORESP
GD BLK
XFER
NAME
(BIT 4 = 0)
These two bits reflect the retry status of the most recent message. The number of times that the mes-
sage was retried is delineated by these two bits as shown below:
RETRY COUNT 1
RETRY COUNT 0
Number of
(bit 14)
(bit 13)
Message Retries
0
1
0
N/A
1
2
FUNCTIONAL DESCRIPTION
INVERSE
(BIT 4 = 1)
GT/GP0
NE/GP1
0
ALWAYS
Less Than Flag set or cleared after CFT or CMT operation. Also, General Purpose Flag 0 may be set or
cleared by a FLG operation.
NEVER
F
GP2
GP3
GP4
GP5
GP6
GP7
1
RESP
Equal Flag set or cleared after CFT or CMT operation. Also, General Purpose Flag 1 may also be set or
cleared by a FLG operation.
GD BLK
XFER
BAD
MESSAGE
GOOD
MESSAGE
The ALWAYS bit should be set to designate an instruction as unconditional. The inverse (NEVER) bit
can be used to implement a NOP instruction.
C
BAD MESSAGE indicates either a format error, loop test fail, or no response error for the most recent
message. Note that a "Status Set" condition has no effect on the "BAD MESSAGE/GOOD MESSAGE"
condition code.
FMT ERR
9
FMT ERR indicates that the received portion of the most recent message contained one or more viola-
tions of the 1553 message validation criteria (sync, encoding, parity, bit count, word count, etc.), or the
RT's status word received from a responding RT contained an incorrect RT address field.
MASKED
STATUS
BIT
MASKED
STATUS
BIT
B
General Purpose Flags may be set, cleared, or toggled by a FLG operation. The host processor can
set, clear, or toggle these flags in the same way as the FLG instruction by means of the BC GENERAL
PURPOSE FLAG REGISTER.
Indicates that one or both of the following conditions have occurred for the most recent message: (1) If
one (or more) of the Status Mask bits (14 through 9) in the BC Control Word is logic "0" and the corre-
sponding bit(s) is (are) set (logic "1") in the received RT Status Word. In the case of the RESERVED
BITS MASK (bit 9) set to logic "0," any or all of the 3 Reserved Status Word bits being set will result in
a MASKED STATUS SET condition; and/or (2) If BROADCAST MASK ENABLED/XOR (bit 11 of
Configuration Register #4) is logic "1" and the MASK BROADCAST bit of the message's BC Control
Word is logic "0" and the BROADCAST COMMAND RECEIVED bit in the received RT Status Word is
logic "1.".
2
3
4
5
6
7
NORESP indicates that an RT has either not responded or has responded later than the BC No
Response Timeout time. The Enhanced Mini-ACE's No Response Timeout Time is defined per
MIL-STD-1553B as the time from the mid-bit crossing of the parity bit of the last word transmitted by the
BC to the mid-sync crossing of the RT Status Word. The value of the No Response Timeout value is
programmable from among the nominal values 18.5, 22.5, 50.5, and 130 s (±1 s) by means of bits 10
and 9 of Configuration Register #5.
A
For the most recent message, GD BLK XFER will be set to logic "1" following completion of a valid
(error-free) RT-to-BC transfer, RT-to-RT transfer, or transmit mode code with data message. This bit is
set to logic "0" following an invalid message. GOOD DATA BLOCK TRANSFER is always logic "0" fol-
lowing a BC-to-RT transfer, a mode code with data, or a mode code without data. The Loop Test has
no effect on GOOD DATA BLOCK TRANSFER. GOOD DATA BLOCK TRANSFER may be used to
determine if the transmitting portion of an RT-to-RT transfer was error free.
相关PDF资料 |
PDF描述 |
|---|---|
| BU-61865G4-162K | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, MQFP72 |
| BU-61745G4 | 2 CHANNEL(S), MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61843F3 | 2 CHANNEL(S), MIL-STD-1553 CONTROLLER, CQFP72 |
| BU-61860B3-601 | 2 CHANNEL(S), MIL-STD-1553 CONTROLLER, PBGA128 |
| BU-63825D1-301 | 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP70 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BU-61865G3-100 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Telecommunication IC |
| BU-61865G3-110 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Telecommunication IC |
| BU-61865G4-100 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Telecommunication IC |
| BU-61865G4-110 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Telecommunication IC |
| BU-61XXX | 制造商:未知厂家 制造商全称:未知厂家 功能描述:MINIATURE ADVANCED COMMUNICATION ENGINE (MINI-ACE) AND MINI-ACE PLUS |
发布紧急采购，3分钟左右您将得到回复。