参数资料
型号: BU-65170V6-320Q
厂商: DATA DEVICE CORP
元件分类: 微控制器/微处理器
英文描述: 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDFP70
封装: 48.30 X 25.40 MM, 3.81 MM HEIGHT, FP-70
文件页数: 5/44页
文件大小: 563K
代理商: BU-65170V6-320Q
13
Data Device Corporation
www.ddc-web.com
BU-65170/61580/61585
H1 web-09/02-0
Block. This includes locations for the Control, Command and
(transmitted) Data Words that are to be read from RAM by the
BC protocol logic. In addition, subsequent contiguous locations
must be allocated for storage of received Loopback, RT Status
and Data Words. FIGURE 4 illustrates the organization of the BC
message blocks for the various MIL-STD-1553 message for-
mats. Note that for all of the message formats, the BC Control
Word is located in the first location of the message block.
For each of the BC Message Block formats, the first word in the
block is the BC Control Word. The BC Control Word is not trans-
mitted on the 1553 bus. Instead, it contains bits that select the
active bus and message format; enable off-line self-test; mask-
ing of Status Word bits; enable retries and interrupts; and speci-
fies MIL-STD-1553A or -1553B error handling. The bit mapping
and definitions of the BC Control Word are illustrated in
TABLE 8.
The BC Control Word is followed by the Command Word to be
transmitted, and subsequently by a second Command Word (for
an RT-to-RT transfer), followed by Data Words to be transmitted
(for Receive commands). The location after the last word to be
transmitted is reserved for the Loopback Word. The Loopback
Word is an on-line self-test feature. The subsequent locations
after the Loopback Word are reserved for received Status Words
and Data Words (for Transmit commands).
AUTOMATIC RETRIES
The BU-61580 BC implements automatic message retries. When
enabled, retries will occur, following response timeout or format
error conditions. As additional options, retries may be enabled
when the Message Error Status Word bit is set by a 1553A RT or
following a ”Status Set” condition. For a failed message, either
one or two message retries will occur, the bus channel (same or
alternate) is independently programmable for the first and sec-
ond retry attempts. Retries may be enabled or disabled on an
individual message basis.
BC INTERRUPTS
BC interrupts may be enabled by the Interrupt Mask Register for
Stack Rollover, Retry, End-of-Message (global), End-of-
Message (in conjunction with the BC Control Word for individual
messages), response timeout, message error, end of BC frame,
and Status Set conditions. The definition of “Status Set” is pro-
grammable on an individual message basis, by means of the BC
Control Word. This allows for masking (“care/don't care”) of the
individual RT Status Word bits.
REMOTE TERMINAL (RT) ARCHITECTURE
The RT protocol design of the BU-65170/61580 represents
DDC's fifth generation implementation of a 1553 RT. One of the
salient features of the ACE's RT architecture is its true multipro-
tocol functionality. This includes programmable options for sup-
port of MIL-STD-1553A, the various McAir protocols, and MIL-
STD-1553B Notice 2. The BU-65170/61580 RT response time is
2 to 5 s dead time (4 to 7 s per 1553B), providing compliance
to all the 1553 protocols. Additional multiprotocol features of the
BU-65170/61580 include options for full software control of RT
Status and Built-in-Test (BIT) words. Alternatively, for 1553B
applications, these words may be formulated in real time by the
BU-65170/61580 protocol logic.
The BU-65170/61580 RT protocol design implements all the
MIL-STD-1553B message formats and dual redundant mode
codes. This design is based largely on previous generation prod-
ucts that have passed SEAFAC testing for MIL-STD-1553B com-
pliance. The ACE RT performs comprehensive error checking,
word and format validation, and checks for various RT-to-RT
transfer errors. Other key features of the BU-65170/61580 RT
BC-to-RT Transfer
Control Word
Receive Command Word
Data Word #1
Data Word #2
.
Last Data Word
Last Data Word Looped Back
Status Received
Last Data Word
.
Data Word #2
Data Word #1
Status Received
Transmit Command Looped Back
Transmit Command Word
Control Word
RT-to-BC Transfer
Transmit Command
Looped Back
Rx RT Status Word
Last Data
.
Data #2
Data #1
Tx RT Status Word
Transmit Command
Receive Command
Control Word
RT-to-RT Transfer
Mode Command
Looped Back
Status Received
Mode Command
Control Word
Mode Code;
No Data
Mode Command
Looped Back
Data Word
Status Received
Tx Mode Command
Control Word
Tx Mode Code;
With Data
Tx Command
Looped Back
Last Data
.
Data #2
Data #1
Tx RT Status Word
Tx Command
Rx Broadcast Command
Control Word
RT-to-RTs (Broadcast)
Transfer
Last Data Status
Word
Last Data
.
Data #2
Data #1
Broadcast Command
Control Word
Broadcast
Data Word
Data Word Looped
Back
Status Received
Rx Mode Command
Control Word
Rx Mode Code;
With Data
Broadcast Mode Command
Looped Back
Broadcast Mode Command
Control Word
Broadcast Mode Code;
No Data
Data Word Looped Back
Data Word
Broadcast Mode Command
Control Word
Broadcast Mode Code;
With Data
FIGURE 4. BC MESSAGE BLOCK FORMATS
相关PDF资料
PDF描述
BU-65170V6-520S 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CDFP70
BU-61559D1-100K 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP78
BU-61559D1-100S 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP78
BU-61559D1-100W 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP78
BU-61559D1-430W 2 CHANNEL(S), 1M bps, MIL-STD-1553 CONTROLLER, CQIP78
相关代理商/技术参数
参数描述
BU65171S3100 制造商:未知厂家 制造商全称:未知厂家 功能描述:Telecommunication IC
BU65171S3110 制造商:未知厂家 制造商全称:未知厂家 功能描述:Telecommunication IC
BU65171S3120 制造商:未知厂家 制造商全称:未知厂家 功能描述:Telecommunication IC
BU65171S3300 制造商:未知厂家 制造商全称:未知厂家 功能描述:Telecommunication IC
BU65171V3100 制造商:未知厂家 制造商全称:未知厂家 功能描述:Telecommunication IC