参数资料
型号: BX80551PG2800FN
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 32-BIT, 2800 MHz, MICROPROCESSOR, PBGA775
封装: FLIP CHIP, LGA-775
文件页数: 14/105页
文件大小: 1870K
代理商: BX80551PG2800FN
16
Datasheet
Electrical Specifications
2.2.3
FSB Decoupling
The Pentium D processor package integrates signal termination on the die as well as incorporates
high frequency decoupling capacitance on the processor package. Decoupling must also be
provided by the system baseboard for proper GTL+ bus operation.
2.3
Voltage Identification
The Voltage Identification (VID) specification for the Pentium D processor is defined by the
Voltage Regulator Down (VRD) 10.1 Design Guide For Desktop LGA775 Socket. The voltage set
by the VID signals is the reference VR output voltage to be delivered to the processor VCC lands
(Section 2.5.3 for VCC overshoot specifications). Refer to Table 2-10 for the DC specifications for
these signals. A minimum voltage for each processor frequency is provided in Table 2-3.
Individual processor VID values may be calibrated during manufacturing such that two devices at
the same core speed may have different default VID settings. This is reflected by the VID Range
values provided in Table 2-3.
The Pentium D processor uses six voltage identification signals, VID[5:0], to support automatic
selection of power supply voltages. Table 2-1 specifies the voltage level corresponding to the state
of VID[5:0]. A ‘1’ in this table refers to a high voltage level and a ‘0’ refers to low voltage level. If
the processor socket is empty (VID[5:0] = x11111), or the voltage regulation circuit cannot supply
the voltage that is requested, it must disable itself. See the Voltage Regulator Down (VRD) 10.1
Design Guide For Desktop LGA775 Socket for more details.
The processor provides the ability to operate while transitioning to an adjacent VID and its
associated processor core voltage (VCC). This will represent a DC shift in the load line. It should be
noted that a low-to-high or high-to-low voltage state change may result in as many VID transitions
as necessary to reach the target core voltage. Transitions above the specified VID are not permitted.
Minimum and maximum voltages must be maintained as shown in Table 2-4/Table 2-5 and
Figure 2-1/Figure 2-2 as measured across the VCC_SENSE and VSS_SENSE lands.
The VRM or VRD utilized must be capable of regulating its output to the value defined by the new
VID. DC specifications for dynamic VID transitions are included in Table 2-3, Table 2-4, and
Table 2-5. Refer to the Voltage Regulator Down (VRD) 10.1 Design Guide For Desktop LGA775
Socket for further details.
相关PDF资料
PDF描述
BX80551PG2800FT 32-BIT, 2800 MHz, MICROPROCESSOR, PBGA775
BX80552360 32-BIT, 3460 MHz, MICROPROCESSOR, CBGA775
BX80552651 32-BIT, 3400 MHz, MICROPROCESSOR, PBGA775
BX80552651T 32-BIT, 3400 MHz, MICROPROCESSOR, PBGA775
BX80552661 32-BIT, 3600 MHz, MICROPROCESSOR, PBGA775
相关代理商/技术参数
参数描述
BX80552352 S L96P 制造商:Intel 功能描述:MPU Celeron 制造商:Intel 功能描述:MPU Celeron? D Processor 352 65nm 3.2GHz 775-Pin FCLGA4
BX80552360 S L9KK 制造商:Intel 功能描述:MPU CELERON 65NM 3.46GHZ 775PIN FCLGA4 - Boxed Product (Development Kits)
BX80552631 制造商:Intel 功能描述:Pentium4 Processor 630 3.0GHz with fan
BX80552631 S L9KG 制造商:Intel 功能描述:
BX80552641T2 制造商:Intel 功能描述:P4 641 3.2GHZ LP-BTX 2MB - Boxed Product (Development Kits)