参数资料
型号: C1206C100DDRAC
厂商: KEMET Corporation
英文描述: CERAMIC CHIP / HIGH VOLTAGE
中文描述: 陶瓷芯片/高电压
文件页数: 6/9页
文件大小: 1636K
代理商: C1206C100DDRAC
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Performance Notes
1. Cover Tape Break Force:
1.0 Kg Minimum.
2. Cover Tape Peel Strength:
The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 Newton to 1.0 Newton (10g to 100g)
12 mm
0.1 Newton to 1.3 Newton (10g to 130g)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier
tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape
shall be pulled at a velocity of 300 ±10 mm/minute.
3. Reel Sizes:
Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")
reels (with C-7280). Note that 13
reels are preferred.
4. Labeling:
Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.
Refer to EIA-556.
Embossed Carrier Tape Configuration:
Figure 1
NOTES
1. B1 dimension is a reference dimension for tape feeder clearance only.
2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of
embossment location and hole location shall be applied independent of each other.
3. Tape with components shall pass around radius
R
without damage (see sketch A). The minimum trailer length (Fig. 2) may require
additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2)
4. The cavity defined by A
,
B
,
and K
shall be configured to surround the part with sufficient clearance such that the chip does not pro-
trude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical
restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm
maximum in the pocket (not applicable to vertical clearance.)
Table 1 — EMBOSSED TAPE DIMENSIONS
(Metric will govern)
Constant Dimensions — Millimeters (Inches)
E
P
0
Tape Size
D
0
P
2
T Max
T
1
Max
8 mm
and
12 mm
1.5
1.75 ±0.10
4.0 ±0.10
2.0 ±0.05
0.600
0.100
+0.10 -0.0
(0.059
+0.004, -0.0)
(0.069 ±0.004)
(0.157 ±0.004)
(0.079 ±0.002)
(0.024)
(0.004)
Variable Dimensions — Millimeters (Inches)
D
1
Min.
F
Note 2
1.0
3.5 ±0.05
Tape Size
Pitch
B
1
Max.
Note 1
4.4
P
1
R Min.
Note 3
25.0
T
2
Max
W
A
0
B
0
K
0
Note 4
8 mm
Single
(4 mm)
4.0 ±0.10
2.5
8.0 ±0.30
(0.173)
(0.039)
(0.138 ±0.002)
(0.157 ±0.004) (0.984)
(0.098)
(.315 ±0.012)
12 mm
Double
(8 mm)
8.2
1.5
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004) (1.181)
30.0
4.6
12.0 ±0.30
(0.323)
(0.059)
(0.181) (0.472 ±0.012)
TANTALUM, CERAMIC AND
ALUMINUM CHIP CAPACITORS
Packaging Information
94
相关PDF资料
PDF描述
C1206C100DFGAC CERAMIC CHIP / HIGH VOLTAGE
C1206C100DFRAC CERAMIC CHIP / HIGH VOLTAGE
C1206C100DGGAC CERAMIC CHIP / HIGH VOLTAGE
C1206C100DGRAC CERAMIC CHIP / HIGH VOLTAGE
C1206C100DHGAC CERAMIC CHIP / HIGH VOLTAGE
相关代理商/技术参数
参数描述
C1206C100DFGAC 制造商:KEMET 制造商全称:Kemet Corporation 功能描述:CERAMIC CHIP / HIGH VOLTAGE
C1206C100DFRAC 制造商:KEMET 制造商全称:Kemet Corporation 功能描述:CERAMIC CHIP / HIGH VOLTAGE
C1206C100DGGAC 制造商:KEMET 制造商全称:Kemet Corporation 功能描述:CERAMIC CHIP / HIGH VOLTAGE
C1206C100DGRAC 制造商:KEMET 制造商全称:Kemet Corporation 功能描述:CERAMIC CHIP / HIGH VOLTAGE
C1206C100DHGAC 制造商:KEMET 制造商全称:Kemet Corporation 功能描述:CERAMIC CHIP / HIGH VOLTAGE