- 您现在的位置：买卖IC网 > PDF目录298896 > C2012X5R1A105KT (AUK Corp) Low Drop Output Voltage Regulator PDF资料下载
参数资料
| 型号： | C2012X5R1A105KT |
| 厂商： | AUK Corp |
| 英文描述： | Low Drop Output Voltage Regulator |
| 中文描述： | 低压差稳压器输出电压 |
| 文件页数： | 6/6页 |
| 文件大小： | 365K |
| 代理商： | C2012X5R1A105KT |
KSI-2012-006
6
S52xxM
Output Capacitor Selection
AUK strongly recommends the use of low ESR(Equivalent series resistance) ceramic
capacitors for Cout and CN . The S52xxM is stable with low ESR capacitor (as low as zero ).
The value of the output capacitor should be 1uF or higher. Either ceramic chip or a
tantalum capacitor may be used at the output. Use of ceramic chip capacitors offer
significant advantages over tantalum capacitors. A Ceramic capacitor is typically cheaper
than a tantalum capacitor, it usually has a smaller footprint, lower height, and lighter
weight than a tantalum capacitor. Furthermore, unlike tantalum capacitors which are
polarized and can be damaged if connected incorrectly, ceramic capacitors are non-
polarized. Low value ceramic chip capacitors with X5R or X7R dielectric are available in the
100pF to 4.7uF range. Beware of using ceramic capacitors with Y5V dielectric since their
ESR increases significantly at cold temperatures. Figure 9 shows a list of recommended
ceramic capacitors for use at the output of S52xxM.
If a tantalum output capacitor is used then for stable operation AUK recommends a low
ESR tantalum capacitor with maximum rated ESR at or below 0.4. Low ESR tantalum
capacitors, such as the TPS series from AVX Corporation (www.avxcorp.com) or the T495
series from Kemet (www.kemet.com) may be used.
In applications where a high output surge current can be expected, use a high value but
low ESR output capacitor for superior load transient response. The S52xxM is stable with
no load.
COUT
Capacitor Size
IOUT
Dielectric
Part Number
Capacitor Vendor
1
F
0805
0 to 150mA
X5R
C2012X5R1A105KT
TDK
′′
0805
′′
X7R
GRM40X7R105K010
muRata
′′
0805
′′
X7R
LMK212BJ105KG
Taiyo-Yuden
′′
1206
′′
X7R
GRM42-6X7R105K016
muRata
′′
1206
′′
X7R
EMK316BJ105KL
Taiyo-Yuden
′′
1206
′′
X5R
TMK316BJ105KL
Taiyo-Yuden
2.2
F
0805
0 to 150mA
X5R
GRM40X5R225K 6.3
muRata
′′
0805
′′
X5R
C2012X5R0J225KT
TDK
′′
1206
′′
X5R
EMK316BJ225ML
Taiyo-Yuden
4.7
F
1206
0 to 150mA
X5R
GRM42-6X5R475K010
MuRata
′′
1206
′′
X7R
LMK316BJ475ML
Taiyo-Yuden
Fig. 9
相关PDF资料 |
PDF描述 |
|---|---|
| C2235 | TELECOM TRANSFORMER |
| C2260A1-0108 | TCXO, CLIPPED SINE OUTPUT, 20 MHz |
| C2260F287DAA216.384MHZ | TCVCXO, CLOCK, 16.384 MHz, HCMOS OUTPUT |
| C2710 | TELECOM TRANSFORMER |
| C3028 | TELECOM TRANSFORMER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| C2012X5R1A105KT/0.85 | 功能描述:多层陶瓷电容器MLCC - SMD/SMT 0805 1.0uF 10volts X5R 10%Thk 0.85mm RoHS:否 制造商:American Technical Ceramics (ATC) 电容:10 pF 容差:1 % 电压额定值:250 V 温度系数/代码:C0G (NP0) 外壳代码 - in:0505 外壳代码 - mm:1414 工作温度范围:- 55 C to + 125 C 产品:Low ESR MLCCs 封装:Reel |
| C2012X5R1A105KT/1.25 | 功能描述:多层陶瓷电容器MLCC - SMD/SMT 1uF 10% 10Volts RoHS:否 制造商:American Technical Ceramics (ATC) 电容:10 pF 容差:1 % 电压额定值:250 V 温度系数/代码:C0G (NP0) 外壳代码 - in:0505 外壳代码 - mm:1414 工作温度范围:- 55 C to + 125 C 产品:Low ESR MLCCs 封装:Reel |
| C2012X5R1A105M | 功能描述:多层陶瓷电容器MLCC - SMD/SMT 0805 1.0uF 10volts X5R 20% RoHS:否 制造商:American Technical Ceramics (ATC) 电容:10 pF 容差:1 % 电压额定值:250 V 温度系数/代码:C0G (NP0) 外壳代码 - in:0505 外壳代码 - mm:1414 工作温度范围:- 55 C to + 125 C 产品:Low ESR MLCCs 封装:Reel |
| C2012X5R1A105M/0.85 | 功能描述:多层陶瓷电容器MLCC - SMD/SMT 0805 1.0uF 10volts X5R 20%Thk 0.85mm RoHS:否 制造商:American Technical Ceramics (ATC) 电容:10 pF 容差:1 % 电压额定值:250 V 温度系数/代码:C0G (NP0) 外壳代码 - in:0505 外壳代码 - mm:1414 工作温度范围:- 55 C to + 125 C 产品:Low ESR MLCCs 封装:Reel |
| C2012X5R1A105M/1.25 | 功能描述:多层陶瓷电容器MLCC - SMD/SMT 1uF 20% 10Volts RoHS:否 制造商:American Technical Ceramics (ATC) 电容:10 pF 容差:1 % 电压额定值:250 V 温度系数/代码:C0G (NP0) 外壳代码 - in:0505 外壳代码 - mm:1414 工作温度范围:- 55 C to + 125 C 产品:Low ESR MLCCs 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。