- 您现在的位置：买卖IC网 > PDF目录375618 > C420C569K1G5TA (KEMET Corporation) Ceramic Leaded Capacitors PDF资料下载
参数资料
| 型号： | C420C569K1G5TA |
| 厂商： | KEMET Corporation |
| 英文描述： | Ceramic Leaded Capacitors |
| 中文描述： | 引线陶瓷电容器 |
| 文件页数： | 4/48页 |
| 文件大小： | 682K |
| 代理商： | C420C569K1G5TA |
第1页第2页第3页当前第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页
CERAMIC CONFORMALLY COATED/AXIAL & RADIAL
PERFORMANCE CHARACTERISTICS FOR STANDARD AND HIGH VOLTAGE
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
4
GENERAL SPECIFICATIONS
Working Voltage:
Axial (WVDC)
C0G – 50 & 100
50, 100, 200, 500, 1k, 1.5k, 2k, 2.5k, 3k
X7R – 50 & 100
50, 100, 200, 500, 1k, 1.5k, 2k, 2.5k, 3k
Z5U – 50 & 100 50 & 100
Radial (WVDC)
Temperature Characteristics:
C0G – 0 ± 30 PPM / °C from - 55°C to + 125°C (1)
X7R – ± 15% from - 55°C to + 125°C
Z5U – + 22% / -56% from + 10°C to + 85°C
Capacitance Tolerance:
C0G – ±0.5pF, ±1%, ±2%, ±5%, ±10%
X7R – ±10%, ±20%, +80% / -20%, +100% / -0%
Z5U – ±20%, +80% / -20%
Construction:
Epoxy encapsulated - meets flame test requirements of UL
Standard 94V-0.
High-temperature solder - meets EIA RS-198, Method 302,
Condition B (260°C for 10 seconds)
Lead Material:
100% matte tin (Sn) with nickel (Ni) underplate and steel core.
Solderability:
EIA RS-198, Method 301, Solder Temperature: 230°C ±5°C.
Dwell time in solder = 7 ± seconds.
Terminal Strength:
EIA RS-198, Method 303, Condition A (2.2kg)
ELECTRICAL
Capacitance @ 25°C:
Within specified tolerance and following test conditions.
C0G – > 1000pF with 1.0 vrms @ 1 kHz
1000pF with 1.0 vrms @ 1 MHz
X7R – with 1.0 vrms @ 1 kHz
Z5U – with 1.0 vrms @ 1 kHz
Dissipation Factor @ 25°C
:
Same test conditions as capacitance.
C0G – 0.15% maximum
X7R – 2.5% maximum
Z5U – 4.0% maximum
Insulation Resistance @ 25°C:
EIA RS-198, Method 104, Condition A <1kV
C0G – 100k Megohm or 1000 Megohm x μF, whichever is less.
500V test @ rated voltage, 1kV test @ 500V
X7R – 100k Megohm or 1000 Megohm x μF, whichever is less.
500V test @ rated voltage, 1kV test @ 500V
Z5U – 10k Megohm or 1000 Megohm x μF, whichever is less.
Dielectric Withstanding Voltage:
EIA RS-198, Method 103
200V test @ 250% of rated voltage for 5 seconds with current
limited to 50mA.
500V test @ 150% of rated voltage for 5 seconds with current
limited to 50mA.
1000V test @ 120% of rated voltage for 5 seconds with current
limited to 50mA.
ENVIRONMENTAL
Vibration:
EIA RS-198, Method 304, Condition D (10-2000Hz; 20g)
Shock:
EIA RS-198, Method 305, Condition I (100g)
Life Test:
EIA RS-198, Method 201, Condition D.
200V
C0G – 200% of rated voltage @ +125°C
X7R – 200% of rated voltage @ +125°C
Z5U – 200% of rated voltage @ +85°C
500V
C0G – rated voltage @ +125°C
X7R – rated voltage @ +125°C
Post Test Limits @ 25°C are:
Capacitance Change:
C0G ( 200V) – +3% or 0.25pF, whichever is greater.
C0G ( 500V) – +3% or 0.50pF, whichever is greater.
X7R – + 20% of initial value (2)
Z5U – + 30% of initial value (2)
Dissipation Factor:
C0G – 0.15% maximum
X7R – 2.5% maximum
Z5U – 4.0% maximum
Insulation Resistance:
C0G – 10k Megohm or 100 Megohm x μF, whichever is less.
1kV tested @ 500V.
X7R – 10k Megohm or 100 Megohm x μF, whichever is less.
1kV tested @ 500V.
Z5U – 1k Megohm or 100 Megohm x μF, whichever is less.
Moisture Resistance:
EIA RS-198, Method 204, Condition A (10 cycles without
applied voltage.)
Post Test Limits @ 25°C are
:
Capacitance Change:
C0G ( 200V) – +3% or 0.25pF, whichever is greater.
C0G ( 500V) – +3% or 0.50pF, whichever is greater.
X7R – + 20% of initial value (2)
Z5U – + 30% of initial value (2)
Dissipation Factor:
C0G – 0.25% maximum
X7R – 3.0% maximum
Z5U – 4.0% maximum
Insulation Resistance:
C0G – 10k Megohm or 100 Megohm x μF, whichever is less.
500V test @ rated voltage, 1kV test @ 500V.
X7R – 10k Megohm or 100 Megohm x μF, whichever is less.
500V test @ rated voltage, >1kV test @ 500V.
Z5U – 1k Megohm or 100 Megohm x μF, whichever is less.
Thermal Shock:
EIA RS-198, Method 202, Condition B (C0G & X7R: -55°C to
+125°C); Condition A (Z5U: -55°C to 85°C)
(1)
+53 PPM -30 PPM/ °C from +25°C to -55°C, + 60 PPM below
10pF.
X7R and Z5U dielectrics exhibit aging characteristics; there-
fore, it is highly recommended that capacitors be deaged for 2
hours at 150°C and stabilized at room temperature for 48
hours before capacitance measurements are made.
(2)
相关PDF资料 |
PDF描述 |
|---|---|
| C420C569K1R5CA | Ceramic Leaded Capacitors |
| C420C569K1R5HA | Ceramic Leaded Capacitors |
| C420C569K1R5TA | Ceramic Leaded Capacitors |
| C420C569K1U5CA | Ceramic Leaded Capacitors |
| C420C569K1U5HA | Ceramic Leaded Capacitors |
相关代理商/技术参数 |
参数描述 |
|---|---|
| C420C569K1R5CA | 制造商:KEMET 制造商全称:Kemet Corporation 功能描述:Ceramic Leaded Capacitors |
| C420C569K1R5HA | 制造商:KEMET 制造商全称:Kemet Corporation 功能描述:Ceramic Leaded Capacitors |
| C420C569K1R5TA | 制造商:KEMET 制造商全称:Kemet Corporation 功能描述:Ceramic Leaded Capacitors |
| C420C569K1U5CA | 制造商:KEMET 制造商全称:Kemet Corporation 功能描述:Ceramic Leaded Capacitors |
| C420C569K1U5HA | 制造商:KEMET 制造商全称:Kemet Corporation 功能描述:Ceramic Leaded Capacitors |
发布紧急采购，3分钟左右您将得到回复。