- 您现在的位置：买卖IC网 > PDF目录366624 > C770PE Turboswitch™ - ultra-fast high voltage diode PDF资料下载
参数资料
| 型号： | C770PE |
| 英文描述： | Turboswitch™ - ultra-fast high voltage diode |
| 中文描述： | 晶闸管|反向导电| 1.5KV五（DRM）的|对200VAR111 |
| 文件页数： | 3/3页 |
| 文件大小： | 39K |
| 代理商： | C770PE |
C770
PG:6.078 Sh 3
DATE: 12/1/98
MOUNTING PRESSPAKS TO HEAT DISSIPATORS
The following instruction is essential for maintaining low,
stable thermal and electrical resistances associated with
the PRESSPAK to heat dissipator surfaces.
1. INSPECTION OF MATING SURFACES
Check each mating surface for nicks,scratches and surface
finish.The PRESSPAK surface has a total indicator reading
TIR < .0005 inch and surface finish 32 prior to factory
electrical test in pressure fixtures. The dissipator
surface should be equally as good.The TIR of a fully
tested PRESSPAK may run higher but not exceed 0.001
inch (**) not including some minor nicks and scratches
associated with the test fixtures. Any bow created by
clamp system at assembly must keep flatness within 0.001
inch.(**)
(**) .002 inch for 77mm PRESSPAKS
2. SURFACE DEOXIDATION AND CLEANING
Although plated surfaces are recommended for aluminum and
copper heat dissipators, bare surfaces may be used if
careful attention to cleaning and treating is assured.
Plated surfaces and PRESSPAKS should be lightly sanded
with 600 grit paper, then oil or compound applied as
recommended. Unplated aluminum surfaces should be
vigorously abraided with a fine wire brush or 3M
"Scotchbrite" coated with Alcoa EJC #2 compound. The EJC
# 2 should be removed and the recommended compound
applied.
3. FINAL SURFACE TREATMENT
Apply silicone oil or a very thin layer of grease or
compound as indicated below. Rotate the PRESSPAK to
properly distribute the applied agent.
. bare copper
- use G322L or LS2037
. bare aluminum - use EJC #2 or G322L
. tin plated copper or aluminum
- preferably reapply DC550 or SF1154
- alternatively use G623 or G322L
. nickel plated aluminum - use DC550,G623 or G322L
. silver plating - not recommended
Recommended silicone oils are SF1154 or DC550
(200 centistoke)
4. MOUNTING
Assemble with specified mounting force applied through a
self-leveling swivel connection. The diameter of the
swivel should be preferably equal but not smaller than
the poleface diameter of the PRESSPAK. Center holes on
the top and bottom of the PRESSPAK are for locating and
positioning it to identical holes anticipated at the
heat dissipator surfaces using 1/8"dia 3/16" roll pins.
NOTES:
Silicone oil DC550 (200 centistoke) is a
product of DOW CORNING; clear silicone grease
G623, yellow G322L and SF1154(200 centistoke)
GE Silicones Waterford NY; EJC# 2 from ALCOA
and black LS2037 from ARCO , 7301 Bessemer Ave.
Cleveland OH.
Limit maximum joint temperature to:
-
95 C using EJC #2
-
150 C using SF1154,DC550 or G322L
5. APPLIED MOUNTING FORCE
The selection of an appropriate commercially available
spring clamping hardware* should consider eatablishing
and maintaining the specified mounting force over the
operating temperature range and operating life of the
PRESSPAK.Thus essential ratings such as thermal resit-
ance ,di/dt,surge current and thermal cycling will not
be impaired.
Specified forces for this product are as
follows:
7000-9000 lbs.
31.1 -40.0 kN
* Consult factory for recommendations or more detailed
instructions.
B
B
A
20° ±5°
D
C
CL
J
A
Φ
= 4.35 in (110.5 mm)
B
Φ
= 2.88 in (73.2 mm)
D= 1.45 in (36.8 mm)
MECHANICAL OUTLINE
External Clamping Force
8000 - 9000 lbs.
35.6 - 40 kN
相关PDF资料 |
PDF描述 |
|---|---|
| C770PM | TURBOSWITCH - ULTRA-FAST HIGH VOLTAGE DIODE |
| C770PS | TURBOSWITCH - ULTRA-FAST HIGH VOLTAGE DIODE |
| C771L | TURBOSWITCH - ULTRA-FAST HIGH VOLTAGE DIODE |
| C771LA | TURBOSWITCH - ULTRA-FAST HIGH VOLTAGE DIODE |
| C771LB | TURBOSWITCH - ULTRA-FAST HIGH VOLTAGE DIODE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| C770PM | 制造商:未知厂家 制造商全称:未知厂家 功能描述:THYRISTOR|REVERSE-CONDUCTING|1.6KV V(DRM)|TO-200VAR111 |
| C770PN | 制造商:Powerex Power Semiconductors 功能描述:SCR - PHASE CONTROL THYRISTOR 制造商:Powerex, Inc. 功能描述:C770PN |
| C770PS | 制造商:未知厂家 制造商全称:未知厂家 功能描述:THYRISTOR|REVERSE-CONDUCTING|1.7KV V(DRM)|TO-200VAR111 |
| C77164-000 | 制造商:TE Connectivity 功能描述:KIT LABEL COVER |
| C-7716-B1S | 制造商:Keystone Electronics Corp 功能描述: |
发布紧急采购，3分钟左右您将得到回复。