参数资料
型号: C8051F006R
厂商: Silicon Laboratories Inc
文件页数: 33/171页
文件大小: 0K
描述: IC 8051 MCU 32K FLASH 48TQFP
标准包装: 1
系列: C8051F00x
核心处理器: 8051
芯体尺寸: 8-位
速度: 25MHz
连通性: SMBus(2 线/I²C),SPI,UART/USART
外围设备: 欠压检测/复位,POR,PWM,温度传感器,WDT
输入/输出数: 16
程序存储器容量: 32KB(32K x 8)
程序存储器类型: 闪存
RAM 容量: 2.25K x 8
电压 - 电源 (Vcc/Vdd): 2.7 V ~ 3.6 V
数据转换器: A/D 8x12b,D/A 2x12b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 48-TQFP
包装: 剪切带 (CT)
其它名称: 336-1004-1
C8051F000/1/2/5/6/7
C8051F010/1/2/5/6/7
Figure 17.6. SPI0CN: SPI Control Register
R/W
R
R/W
Reset Value
SPIF
WCOL
MODF
RXOVRN
TXBSY
SLVSEL
MSTEN
SPIEN
00000000
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
SFR Address:
(bit addressable)
0xF8
Bit7:
SPIF: SPI Interrupt Flag.
This bit is set to logic 1 by hardware at the end of a data transfer. If interrupts are enabled,
setting this bit causes the CPU to vector to the SPI0 interrupt service routine. This bit is
not automatically cleared by hardware. It must be cleared by software.
Bit6:
WCOL: Write Collision Flag.
This bit is set to logic 1 by hardware (and generates a SPI interrupt) to indicate a write to
the SPI data register was attempted while a data transfer was in progress. It is cleared by
software.
Bit5:
MODF: Mode Fault Flag.
This bit is set to logic 1 by hardware (and generates a SPI interrupt) when a master mode
collision is detected (NSS is low and MSTEN = 1). This bit is not automatically cleared by
hardware. It must be cleared by software.
Bit4:
RXOVRN: Receive Overrun Flag.
This bit is set to logic 1 by hardware (and generates a SPI interrupt) when the receive
buffer still holds unread data from a previous transfer and the last bit of the current transfer
is shifted into the SPI shift register. This bit is not automatically cleared by hardware. It
must be cleared by software.
Bit3:
TXBSY: Transmit Busy Flag.
This bit is set to logic 1 by hardware while a master mode transfer is in progress. It is
cleared by hardware at the end of the transfer.
Bit2:
SLVSEL: Slave Selected Flag.
This bit is set to logic 1 whenever the NSS pin is low indicating it is enabled as a slave. It
is cleared to logic 0 when NSS is high (slave disabled).
Bit1:
MSTEN: Master Mode Enable.
0: Disable master mode. Operate in slave mode.
1: Enable master mode. Operate as a master.
Bit0:
SPIEN: SPI Enable.
This bit enables/disables the SPI.
0: SPI disabled.
1: SPI enabled.
Rev. 1.7
128
相关PDF资料
PDF描述
DSPIC33FJ128GP804-E/PT IC DSPIC MCU/DSP 128K 44-TQFP
PIC18F2580-I/SO IC PIC MCU FLASH 16KX16 28SOIC
C8051F005R IC 8051 MCU 32K FLASH 64TQFP
PIC32MX664F064H-I/PT MCU PIC 64KB FLASH 64TQFP
DSPIC33FJ64GS608-I/PT IC MCU/DSP 64KB FLASH 80TQFP
相关代理商/技术参数
参数描述
C8051F007 功能描述:8位微控制器 -MCU 32KB 12ADC RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
C8051F007-GQ 功能描述:8位微控制器 -MCU 32KB 12ADC RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
C8051F007-GQR 功能描述:8位微控制器 -MCU 32KB 12ADC 32Pin MCU Tape and Reel RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
C8051F007R 功能描述:8位微控制器 -MCU C +-12Bit 48Pin RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
C8051F007-W 制造商:Silicon Laboratories Inc 功能描述: