- 您现在的位置：买卖IC网 > PDF目录19830 > CBC3112-D7C-TR1 (Cymbet Corporation)IC BATT SOLID ST ENERCHIP 20DFN PDF资料下载
参数资料
| 型号： | CBC3112-D7C-TR1 |
| 厂商： | Cymbet Corporation |
| 文件页数： | 14/16页 |
| 文件大小： | 0K |
| 描述： | IC BATT SOLID ST ENERCHIP 20DFN |
| 产品培训模块： | Energy Processing and Solid State Batteries for Energy Harvesting |
| 标准包装： | 1 |
| 系列： | EnerChip™ CC |
| 电池化学： | 薄膜 |
| 电压 - 额定： | 3.3V |
| 容量： | 12µAh |
| 尺寸/尺寸： | 0.28" L x 0.28" W x 0.04" H（7.0mm x 7.0mm x 0.9mm） |
| 端接类型： | SMD（SMT）接片 |
| 放电速率： | 50µA |
| 封装/外壳： | 20-DFN |
| 包装： | 标准包装 |
| 工作温度： | -20°C ~ 70°C |
| 配用： | 859-1001-ND - ENERCHIP CC EVAL KIT |
| 其它名称： | 859-1010-6 |
EnerChip CC CBC3112
EnerChip CC CBC3112 PCB Layout Guidelines - Important Notice!
There are several PCB layout considerations that must be taken into account when using the CBC3112:
1. All capacitors should be placed as close as possible to the EnerChip CC. The flying capacitor connections
must be as short as possible and routed on the same layer the EnerChip CC is placed.
2. Power connections should be routed on the layer the EnerChip CC is placed.
3. A ground (GND) plane in the PCB should be used for optimal performance of the EnerChip CC.
4. Very low parasitic leakage currents from the V BAT pin to power, signal, and ground connections, can result
in unexpected drain of charge from the integrated power source. Maintain sufficient spacing of traces and
vias from the V BAT pin and any traces connected to the V BAT pin in order to eliminate parasitic leakage
currents that can arise from solder flux or contaminants on the PCB.
5. Pin 1 V BAT and Pin 4 V CHG must be tied together for proper operation.
6. There should be no traces, vias or connections under the CBC3112 exposed die pad.
7. When placing a silk screen on the PCB around the perimeter of the package, place the silk screen outside
of the package and all metal pads. Failure to observe this precaution can result in package cracking during
solder reflow due to the silk screen material interfering with the solder solidification process during cooling.
8. See Figure 12 for location and dimensions of metal pad placement on the PCB.
Important Note: Designers using EnerChips in their products should also download the EnerChip User Manual
Application Note AN-1026 found here: http://www.cymbet.com/products/datasheets-downloads.php.
Figure 12: Recommend PCB Layout for the CBC3112-D7C Package (Dimensions in mm)
Cymbet Logo
Lot Number
Part Number
Date Code
CBC3112
Labeling
Information
Placement
DS-72-04 Rev F
?2009-2013 Cymbet Corporation ? Tel: +1-763-633-1780 ? www.cymbet.com
Page 14 of 16
相关PDF资料 |
PDF描述 |
|---|---|
| RSC40DRYS | CONN EDGECARD 80POS DIP .100 SLD |
| GRM2195C2A470JZ01D | CAP CER 47PF 100V 5% NP0 0805 |
| VI-JWL-CW-B1 | CONVERTER MOD DC/DC 28V 100W |
| IHLP2020BZER100M11 | INDUCTOR POWER 10UH 2.2A SMD |
| R2D12-0509/H | CONV DC/DC 2W +/-9VOUT SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CBC3112-D7C-TR5 | 功能描述:电子电池 12uAhr EnerChip and CBC910 7x7MLF C Temp RoHS:否 制造商:Cymbet 电池大小:9 mm x 9 mm 输出电压:3.3 V 容量:50 uAh 化学性质: 端接类型:SMD/SMT 可再充电/不可再充电:Rechargeable |
| CBC3112-D7C-WP | 制造商:CYMBET 制造商全称:CYMBET 功能描述:EnerChip CC with Integrated Power Management |
| CBC3150 | 制造商:CYMBET 制造商全称:CYMBET 功能描述:EnerChip CC with Integrated Power Management |
| CBC3150-D9C | 功能描述:电子电池 50uAhr EnerChip and CBC910 9x9MLF C Temp RoHS:否 制造商:Cymbet 电池大小:9 mm x 9 mm 输出电压:3.3 V 容量:50 uAh 化学性质: 端接类型:SMD/SMT 可再充电/不可再充电:Rechargeable |
| CBC3150-D9C-TR1 | 功能描述:电子电池 50uAhr EnerChip CC 9 x9 DFN-20-70C TR1K RoHS:否 制造商:Cymbet 电池大小:9 mm x 9 mm 输出电压:3.3 V 容量:50 uAh 化学性质: 端接类型:SMD/SMT 可再充电/不可再充电:Rechargeable |
发布紧急采购，3分钟左右您将得到回复。