- 您现在的位置：买卖IC网 > PDF目录169506 > CBT3244ADB,118 (NXP SEMICONDUCTORS) Octal bus switch with quad output enables - # of Bits per Enable: 4 ; Description: Bus Switch ; Flow Through Pinout: yes ; Number of bits: 8 ; Operating temperature: -40~85 Cel; Operating voltage: 4.5~5.5 VDC; Package: SOT339-1 (SSOP20); Container: Reel Pack, SMD, 13" PDF资料下载
参数资料
| 型号： | CBT3244ADB,118 |
| 厂商： | NXP SEMICONDUCTORS |
| 元件分类： | 总线收发器 |
| 英文描述： | Octal bus switch with quad output enables - # of Bits per Enable: 4 ; Description: Bus Switch ; Flow Through Pinout: yes ; Number of bits: 8 ; Operating temperature: -40~85 Cel; Operating voltage: 4.5~5.5 VDC; Package: SOT339-1 (SSOP20); Container: Reel Pack, SMD, 13" |
| 中文描述： | 3244 SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20 |
| 封装： | 5.30 MM, PLASTIC, MO-150, SOT-339-1, SSOP-20 |
| 文件页数： | 6/18页 |
| 文件大小： | 109K |
| 代理商： | CBT3244ADB,118 |
9397 750 13362
Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 — 15 September 2005
14 of 18
Philips Semiconductors
CBT3244A
Octal bus switch with quad output enables
13. Soldering
13.1 Introduction to soldering surface mount packages
This text gives a very brief insight to a complex technology. A more in-depth account of
soldering ICs can be found in our
Data Handbook IC26; Integrated Circuit Packages
(document order number 9398 652 90011).
There is no soldering method that is ideal for all surface mount IC packages. Wave
soldering can still be used for certain surface mount ICs, but it is not suitable for ne pitch
SMDs. In these situations reow soldering is recommended.
13.2 Reow soldering
Reow soldering requires solder paste (a suspension of ne solder particles, ux and
binding agent) to be applied to the printed-circuit board by screen printing, stencilling or
pressure-syringe dispensing before package placement. Driven by legislation and
environmental forces the worldwide use of lead-free solder pastes is increasing.
Several methods exist for reowing; for example, convection or convection/infrared
heating in a conveyor type oven. Throughput times (preheating, soldering and cooling)
vary between 100 seconds and 200 seconds depending on heating method.
Typical reow peak temperatures range from 215
°Cto270 °C depending on solder paste
material. The top-surface temperature of the packages should preferably be kept:
below 225
°C (SnPb process) or below 245 °C (Pb-free process)
– for all BGA, HTSSON..T and SSOP..T packages
– for packages with a thickness
≥ 2.5 mm
– for packages with a thickness < 2.5 mm and a volume
≥ 350 mm3 so called
thick/large packages.
below 240
°C (SnPb process) or below 260 °C (Pb-free process) for packages with a
thickness < 2.5 mm and a volume < 350 mm3 so called small/thin packages.
Moisture sensitivity precautions, as indicated on packing, must be respected at all times.
13.3 Wave soldering
Conventional single wave soldering is not recommended for surface mount devices
(SMDs) or printed-circuit boards with a high component density, as solder bridging and
non-wetting can present major problems.
To overcome these problems the double-wave soldering method was specically
developed.
If wave soldering is used the following conditions must be observed for optimal results:
Use a double-wave soldering method comprising a turbulent wave with high upward
pressure followed by a smooth laminar wave.
For packages with leads on two sides and a pitch (e):
– larger than or equal to 1.27 mm, the footprint longitudinal axis is preferred to be
parallel to the transport direction of the printed-circuit board;
相关PDF资料 |
PDF描述 |
|---|---|
| CBT3244ADS,112 | Octal bus switch with quad output enables - # of Bits per Enable: 4 ; Description: Bus Switch ; Flow Through Pinout: yes ; Number of bits: 8 ; Operating temperature: -40~85 Cel; Operating voltage: 4.5~5.5 VDC; Package: SOT724-1 (SSOP20); Container: Tube |
| CBT3244ADS,118 | Octal bus switch with quad output enables - # of Bits per Enable: 4 ; Description: Bus Switch ; Flow Through Pinout: yes ; Number of bits: 8 ; Operating temperature: -40~85 Cel; Operating voltage: 4.5~5.5 VDC; Package: SOT724-1 (SSOP20); Container: Reel Pack, SMD, 13" |
| CBT3244APW,112 | Octal bus switch with quad output enables - # of Bits per Enable: 4 ; Description: Bus Switch ; Flow Through Pinout: yes ; Number of bits: 8 ; Operating temperature: -40~85 Cel; Operating voltage: 4.5~5.5 VDC; Package: SOT360-1 (TSSOP20); Container: Tube |
| CBT3244APW,118 | Octal bus switch with quad output enables - # of Bits per Enable: 4 ; Description: Bus Switch ; Flow Through Pinout: yes ; Number of bits: 8 ; Operating temperature: -40~85 Cel; Operating voltage: 4.5~5.5 VDC; Package: SOT360-1 (TSSOP20); Container: Reel Pack, SMD, 13" |
| CBT3245ABQ,115 | Octal bus switch; Package: SOT764-1 (DHVQFN20); Container: Reel Pack, SMD, 7" |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CBT3244ADB-T | 功能描述:数字总线开关 IC OCTAL BUS SWITCH 10BIT OUTPUT RoHS:否 制造商:Texas Instruments 开关数量:24 传播延迟时间:0.25 ns 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:TSSOP-56 封装:Reel |
| CBT3244ADS | 功能描述:数字总线开关 IC OCTAL BUS SWITCH 10BIT OUTPUT RoHS:否 制造商:Texas Instruments 开关数量:24 传播延迟时间:0.25 ns 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:TSSOP-56 封装:Reel |
| CBT3244ADS,112 | 功能描述:数字总线开关 IC OCTAL BUS SWITCH RoHS:否 制造商:Texas Instruments 开关数量:24 传播延迟时间:0.25 ns 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:TSSOP-56 封装:Reel |
| CBT3244ADS,118 | 功能描述:数字总线开关 IC OCTAL BUS SWITCH RoHS:否 制造商:Texas Instruments 开关数量:24 传播延迟时间:0.25 ns 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:TSSOP-56 封装:Reel |
| CBT3244ADS-T | 功能描述:数字总线开关 IC OCTAL BUS SWITCH 10BIT OUTPUT RoHS:否 制造商:Texas Instruments 开关数量:24 传播延迟时间:0.25 ns 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:TSSOP-56 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。