收藏本站
参数资料
型号： CC-33K2-IP
厂商： Copeland Communications Inc
文件页数： 19/60页
文件大小： 0K
描述： MODEM 33KBAUD PARALLEL 3.3V
标准包装： 30
数据格式： V.22，V23，V.32，V.34，Bell 103，Bell 212A
波特率： 33k
电源电压： 3 V ~ 3.6 V
安装类型： 表面贴装
封装/外壳： 模块
包装： 散装
配用： 539-1002-ND - KIT EVALUATION WORLD MODEM II
Data Sheet
World modem II
Page 26 of 60
2004, Copeland Communications, Inc.
World modem II Datasheet Rev 1.1
Extended AT& Command Set (Command Defaults in Bold) (Continued)
Command
Action
&H7
ITU-T V.22 only (1200 bps)
&H8
Bell 212 only (1200 bps)
&H9
Bell 103 only (300 bps)
&H10
ITU-T V.21 only (300 bps)
&H11
V.23 (1200/75 bps)
&Pn
Japan pulse dialing
&P0
Configure modem for 10 pulse-per-second pulse dialing (Japan)
&P1
Configure modem for 20 pulse-per-second pulse dialing (Japan)
&Tn
Test mode
&T0
Cancel test mode (Escape to command mode to issue AT&T0). This command will also report the
number of bit errors encountered on the previous &T4 test.
&T2
Initiate ITU-T V.54 (ANALOOP) test. Modulation set by &H AT command. Test loop is through the
DSP (CC-14.4K2/CC-33K2/CC-56K2 only). The modem echoes data from TX pin back to RX pin.
&T3
Initiate ITU-T V.54 (ANALOOP) test. Modulation set by &H AT command. Test loop is through the
DSP, DAA interface section, DAA interface and analog hybrid circuit. The modem echoes data
from TX pin back to RX pin.
Initiate transmit as originating modem with automatic data generation. Modulation, data rate and
symbol rate are set by &H, &G and S41. Data pattern is set by the S40 register. Continues until
the ATH command is sent after an escape into command mode.
&T4
Data is also demodulated as in ANALOOP, and any bit errors are counted to be displayed after the
test using &T0.
Initiate transmit as answering modem with automatic data generation. Modulation, data rate, and
symbol rate are set by &H, &G and S41. Data pattern is set by the S40 register. Continues until
ATH command is sent after escape into command mode.
&T5
Data is also demodulated as in ANALOOP, and any bit errors are counted to be displayed after the
test using &T0.
&T6
Compute checksum for firmware-upgradeable section of program memory. If no firmware upgrade
is installed, &T6 returns 0x0408.
&Xn
Automatic determination of telephone line type.
&X0
Abort &x1 or &x2 command
相关PDF资料
PDF描述
VE-262-IX-F3 CONVERTER MOD DC/DC 15V 75W
CC-14.4K2-IP MODEM 14.4KBAUD PARALLEL 3.3V
CC-24K2-IP MODEM 2400BAUD PARALLEL 3.3V
CC-92K2-IP5 MODEM 56KBAUD V.90 PARALLEL 5V
CC-56K2-IP5 MODEM 56KBAUD PARALLEL 5V
相关代理商/技术参数
参数描述
CC-33K2-IP5 功能描述:MODEM 33KBAUD PARALLEL 5V RoHS:否 类别:集成电路 (IC) >> 接口 - 调制解调器 - IC 和模块 系列:- 标准包装:25 系列:- 数据格式:V.21，V.22，V.23，V.29，V.32，V.34，V.90，V.92，Bell 103，Bell 212A 波特率:33.6k 电源电压:3.3V 安装类型:- 封装/外壳:- 供应商设备封装:- 包装:托盘 配用:591-1013-ND - KIT DEV SOCKETMODEM PARALLEL591-1009-ND - KIT DEV SRL SOCKETMODEM UNIVERSL 其它名称:MT5656SMI-P-V-34.R2-SPMT5656SMI-P-V-34.R2-SP-NDQ4711574
CC-33K2-IS 功能描述:MODEM 33KBAUD SERIAL 3.3V RoHS:否 类别:集成电路 (IC) >> 接口 - 调制解调器 - IC 和模块 系列:- 标准包装:25 系列:- 数据格式:V.21，V.22，V.23，V.29，V.32，V.34，V.90，V.92，Bell 103，Bell 212A 波特率:33.6k 电源电压:3.3V 安装类型:- 封装/外壳:- 供应商设备封装:- 包装:托盘 配用:591-1013-ND - KIT DEV SOCKETMODEM PARALLEL591-1009-ND - KIT DEV SRL SOCKETMODEM UNIVERSL 其它名称:MT5656SMI-P-V-34.R2-SPMT5656SMI-P-V-34.R2-SP-NDQ4711574
CC-33K2-IS5 功能描述:MODEM 33KBAUD SERIAL 5V RoHS:否 类别:集成电路 (IC) >> 接口 - 调制解调器 - IC 和模块 系列:- 标准包装:25 系列:- 数据格式:V.21，V.22，V.23，V.29，V.32，V.34，V.90，V.92，Bell 103，Bell 212A 波特率:33.6k 电源电压:3.3V 安装类型:- 封装/外壳:- 供应商设备封装:- 包装:托盘 配用:591-1013-ND - KIT DEV SOCKETMODEM PARALLEL591-1009-ND - KIT DEV SRL SOCKETMODEM UNIVERSL 其它名称:MT5656SMI-P-V-34.R2-SPMT5656SMI-P-V-34.R2-SP-NDQ4711574
CC3411-000 制造商:TE Connectivity 功能描述:2696M-P-006-86-N - Bulk
CC3430 制造商:Hubbell Wiring Device-Kellems 功能描述:PS, IEC, PARTS, REPL, CCLAMP, 3/4W 30A
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*