- 您现在的位置：买卖IC网 > PDF目录378445 > CH5001A (Electronic Theatre Controls, Inc.) CMOS COLOR DIGITAL VIDEO CAMERA PDF资料下载
参数资料
| 型号： | CH5001A |
| 厂商： | Electronic Theatre Controls, Inc. |
| 英文描述： | CMOS COLOR DIGITAL VIDEO CAMERA |
| 中文描述： | CMOS彩色数码摄像机 |
| 文件页数： | 13/34页 |
| 文件大小： | 136K |
| 代理商： | CH5001A |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页当前第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页
CHRONTEL
CH5001A
201-0000-032 Rev 3.0, 6/2/99
13
Figure 7: Alternating Write Cycles
Note:
The acknowledge is from the CH5001 (slave).
If AutoInc = 1, then the register address pointer will be incremented automatically and subsequent data bytes will be
written into successive registers without providing an RAB between each data byte. An auto-increment write cycle
is shown in
Figure 8
.
Figure 8: Auto-Increment Write Cycle
Note:
The acknowledge is from the CH5001 (slave).
When the auto-increment mode is enabled (AutoInc is set to 1), the register address pointer continues to increment
for each write cycle until AR[5:0] = 26 (26 is the address of the address register). The next byte of information
represents a new auto-sequencing starting address which is the address of the register to receive the next byte. The
auto-sequencing then resumes based on this new starting address. The auto-increment sequence can be terminated
any time by either a STOP or RESTART condition. The write operation can be terminated with a STOP condition.
CH5001 Read Cycle Protocols (R/W = 1)
If a master-receiver is involved in a transfer, it must signal the end of data to the slave-transmitter by not generating
an acknowledge on the last byte that was clocked out of the slave. The slave-transmitter CH5001 releases the data
line to allow the master to generate the STOP condition or the RESTART condition.
To read the content of the registers, the master device starts by issuing a START condition (or a RESTART
condition). The first byte of data, after the START condition, is a DAB with R/W = 0. The second byte is the RAB
with AR[5:0] containing the address of the register that the master device intends to read from in AR[5:0]. The
master device should then issue a RESTART condition (RESTART = START, without a previous STOP condition).
The first byte of data, after this RESTART condition, is another DAB with R/W*=1, indicating the master’s
intention to read data hereafter. The master then reads the next byte of data (the content of the register specified in
the RAB). If AutoInc = 0, then another RESTART condition, followed by another DAB with R/W* = 0 and RAB, is
expected from the master device. The master device then issues another RESTART, followed by another DAB. After
SD
SC
1 - 8
RAB
9
ACK
Condition
Start
Condition
Stop
1 - 7
Device
8
R/W*
9
ACK
CH5001
acknowledge
CH5001
acknowledge
1 - 8
RAB
9
ACK
CH5001
acknowledge
1 - 8
Data
9
ACK
I
2
C
1 - 8
Data
9
ACK
CH5001
acknowledge
CH5001
acknowledge
SD
SC
1 - 8
9
RAB n
ACK
Start
Condition
Stop
Condition
CH5001
acknowledge
1 - 8
Data n
9
1 - 8
9
ACK
Data n+1
ACK
CH5001
acknowledge
CH5001
acknowledge
CH5001
acknowledge
1 - 7
Device ID
8
R/W*
9
ACK
I
2
C
相关PDF资料 |
PDF描述 |
|---|---|
| CH5001A-L | CMOS COLOR DIGITAL VIDEO CAMERA |
| CH5101A-Q | CMOS Monochrome Digital Video Camera |
| CH5101A | CMOS Monochrome Digital Video Camera |
| CH5101A-L | CMOS Monochrome Digital Video Camera |
| CH7003B-T | Digital PC to TV Encoder |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CH5001A-L | 制造商:未知厂家 制造商全称:未知厂家 功能描述:CMOS COLOR DIGITAL VIDEO CAMERA |
| CH5002A-L | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Optoelectronic |
| CH5002A-Q | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Optoelectronic |
| CH500H-40PT | 制造商:CHENMKO 制造商全称:Chenmko Enterprise Co. Ltd. 功能描述:SCHOTTKY BARRIER DIODE VOLTAGE 45 Volts CURRENT 0.1 Ampere |
| CH50-10PAK | 制造商:Black Box Corporation 功能描述:5" CABLE HANGER 10 PACK AIR HANDLING SPACES |
发布紧急采购，3分钟左右您将得到回复。