Product Data Sheet
3M Moisture Barrier Bag Dri-Shield 2000
3M Moisture Barrier Bag Dri-Shield 2000
Product Data Sheet
This aluminized moisture barrier bag is designed to provide a static safe environment
for sensitive electronic devices. The bags are heat sealable and suitable for vacuum
packaging. Bags are printed with ESD and moisture warning symbols and a lot code
for traceability.
3M Moisture Barrier Bags Dri-Shield 2000 are manufactured from a laminate of
multiple layers of aluminized polyester and polyethylene. Polyester provides puncture
resistance. Metal layers are intended to provide shielding of Electrostatic Discharge
(ESD) and to help minimize the penetration of electric field.
These bags are tested to meet or exceed certain electrical and physical requirements
of ANSI/ESD S541, and to be ANSI/ESD S20.20 program compliant. Bags are RoHS
Compliant* and lead-free**.
Physical
Typical Values
Testing Method
Moisture Vapor Transmission
Rate (MVTR)
0.035 grams/100 sq. in./24 hrs.1
MIL-STD-3010C Method 3030
Tensile Strength
7800 PSI, 54 MPa
ASTM D882
Puncture Resistance
20 lbs, 89 N
MIL-STD-3010C Method 2065
Seal Strength
15 lbs, 66N
ASTM D882
Thickness
3.6 mils, .0914 mm +/-15%
MIL-STD-3010C Method 1003
Marking Adhesion
Pass
IPC-TM-650 2.4.1
Electrical
Typical Values
Testing Method
ESD Shielding
<10 nJ
ANSI/ESD STM11.31
Surface Resistance - Interior <1x1011 ohms
ANSI/ESD STM11.11
Surface Resistance -
Exterior
<1x1011 ohms
ANSI/ESD STM11.11
Static Decay
< 2 seconds
ETS 406D
EMI Attenuation
45 dB
1 to 10 GHz
Cleanliness
Typical Values
Testing Method
Silicone
Not Detected
FTIR
Heat Sealing Conditions
Typical Values
Temperature
300°F - 400°F, 140°C - 204°C
Time
0.6 - 4.5 seconds
Pressure
30 - 70 PSI, 206 - 482 KPa
3M Moisture Barrier Bag
Dri-Shield 2000
1
Standard deviation of 0.008 grams/100 sq. in./24 hrs.
This product is intended for commercial use only. This product is not on the Qualified Product
Listing under the Defense Standardization Program.
