
8/9
Precautions
1. Avoid the application of any stress to the lens portion.
2. Avoid any contact by a sharp metal nail or other materials with the lens portion.
3. This product should be secured firmly by fastening an M3 screw on both sides of the product.
Please be careful not to apply any stress to the product during the clamping operation.
please check thoroughly.
4. A heat radiating grease should be applied to the whole rear surface so that this product
can dissipate heat as a whole. This product could be bent during the clamping operation
if heat grease in sheet form is used. For this reason, it is recommended that grease
5. Handling of static electricity
of a wristband or anti-static gloves when handling this product.
- As for damages due to static electricity, please check them by lighting inspection.
CE's lighting inspection criterion
in assembled status.
Approved Checked Drawn
Symbol
2007.11.20
Mark
Date
Drawing No
Name
CL-L102-C3D
A96E-815-01
New implementation
As the connection status could vary depending on materials of outer heat sink,
Judgmental criterion
K.Fukasawa
Nov.20.'07
K.Funakubo
Nov.20.'07
T.Fuwa
Nov.20.'07
- Please take measures to prevent any static electricity being produced such as the wearing
6. Please be aware that this product should not come into contact with any other parts
SPECIFICATIONS
in paste form is used.
No-lighting should not exist.
Description Appro.
CITIZEN ELECTRONICS CO.,LTD.
Condition
IF=1mA or less
Lens portion (Shaded area)
Recommended torque:0.6~0.8Nm
Ref. CE-P234 03/08