- 您现在的位置：买卖IC网 > PDF目录18472 > CM04RC10T (Taiyo Yuden)CHOKE COMMON MODE 100OHMS SMD PDF资料下载
参数资料
| 型号： | CM04RC10T |
| 厂商： | Taiyo Yuden |
| 文件页数： | 6/6页 |
| 文件大小： | 0K |
| 描述： | CHOKE COMMON MODE 100OHMS SMD |
| 标准包装： | 1 |
| 系列： | CM04RC |
| 滤波器类型： | 电源线 |
| 线路数： | 2 |
| 电流： | 4A |
| DC 电阻(DCR)： | 最大 20 毫欧 |
| 阻抗： | 100 欧姆 |
| 安装类型： | 表面贴装 |
| 尺寸/尺寸： | 0.205" L x 0.354" W（5.20mm x 9.00mm） |
| 高度（最大）： | 0.173"（4.40mm） |
| 封装/外壳： | 水平式，4 鸥翼形 |
| 工作温度： | -25°C ~ 105°C |
| 包装： | 标准包装 |
| 其它名称： | 587-2707-6 |
6. Handling
◆Handling
1. Keep the product away from all magnets and magnetic objects.
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board.
2. Board separation should not be done manually, but by using the appropriate devices.
Precautions
Technical
considerations
◆Mechanical considerations
1. Please do not give the product any excessive mechanical shocks.
2. Please do not add any shock and power to a product in transportation.
◆Pick-up pressure
1. Please do not push to add any pressure to a winding part. Please do not give any shock and push onto an exposed part of ferrite cores.
◆Packing
1. Please avoid accumulation of a packing box as much as possible.
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Breakaway PC boards (splitting along perforations)
1. The position of the product on PCBs shall be carefully considered to minimize the stress caused from splitting of the PCBs.
◆Mechanical considerations
1. There is a case to be damaged by a mechanical shock.
2. There is a case to be broken by the handling in transportation.
◆Pick-up pressure
1. An excessive shock or stress may cause a damage to the product or a deterioration of a characteristic.
◆Packing
1. If packing boxes are accumulated, that could cause a deformation on packing tapes or a damage on the products.
7. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
Precautions
Technical
considerations
? Recommended conditions
Ambient temperature : 0～40℃, Humidity : Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, the solderability of electrodes may decrease
gradually. For this reason, the products should be used within one year from the time of delivery. In case of storage over 6 months,
solderability shall be checked before actual usage.
◆Storage
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.
? This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
coil_smd_trans_prec_e-E02R01
相关PDF资料 |
PDF描述 |
|---|---|
| B32521C1154K189 | FILM CAP 0.1500UF 10% 100V |
| 3549H-1AE-202A | POT 2.0K OHM 7/8" RD HYBRITRON |
| 3549H-1AE-103A | POT 10K OHM 7/8" RD HYBRITRON |
| 3545S-1-501L | POT 500 OHM 7/8" RD WW |
| ABLJO-160.000MHZ-T2 | OSCILLATOR 160.000 MHZ 3.3V SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CM04RC11T | 制造商:TAIYO-YUDEN 制造商全称:Taiyo Yuden (U.S.A.), Inc 功能描述:COMMON MODE CHOKE COILS (FOR DC AND SIGNAL LINES) SMD TYPE |
| CM04RC12T | 制造商:TAIYO-YUDEN 制造商全称:Taiyo Yuden (U.S.A.), Inc 功能描述:COMMON MODE CHOKE COILS (FOR DC AND SIGNAL LINES) SMD TYPE |
| CM04RC13T | 制造商:TAIYO-YUDEN 制造商全称:Taiyo Yuden (U.S.A.), Inc 功能描述:COMMON MODE CHOKE COILS (FOR DC AND SIGNAL LINES) SMD TYPE |
| CM04RCXXX | 制造商:TAIYO-YUDEN 制造商全称:Taiyo Yuden (U.S.A.), Inc 功能描述:COMMON MODE CHOKE COILS (FOR DC AND SIGNAL LINES) SMD TYPE |
| CM04T | 制造商:DDK 制造商全称:DDK Ltd. 功能描述:M12 Sized & Sealed Circular Connectors |
发布紧急采购，3分钟左右您将得到回复。