参数资料
型号: CN2220K35G
厂商: EPCOS Inc
文件页数: 80/82页
文件大小: 0K
描述: VARISTOR 35VRMS 2220 SMD
标准包装: 1,000
系列: CN 标准
变阻器电压: 56V
电流 - 浪涌: 1.2kA
电路数: 1
最大交流电压: 35VAC
最大直流电压: 45VDC
能量: 7.7J
封装/外壳: 2220(5750 公制)
其它名称: B72540V 350K 62
B72540V0350K062
B72540V350K62
Multilayer varistors (MLVs)
Standard series
Specified values only apply to CTVS components that have not been subject to prior electrical,
mechanical or thermal damage. The use of CTVS devices in line-to-ground applications is
therefore not advisable, and it is only allowed together with safety countermeasures like
thermal fuses.
Storage
Only store CTVS in their original packaging. Do not open the package before storage.
Storage conditions in original packaging: temperature 25 to +45 ° C, relative humidity ≤ 75%
annual average, maximum 95%, dew precipitation is inadmissible.
Do not store CTVS devices where they are exposed to heat or direct sunlight. Otherwise the
packaging material may be deformed or CTVS may stick together, causing problems during
mounting.
Avoid contamination of the CTVS surface during storage, handling and processing.
Avoid storing CTVS devices in harmful environments where they are exposed to corrosive
gases for example (SO x , Cl).
Use CTVS as soon as possible after opening factory seals such as polyvinyl-sealed packages.
Solder CTVS components after shipment from EPCOS within the time specified:
CTVS with Ni barrier termination, 12 months
CTVS with AgPd and AgPt termination, 6 months
SHCV and CU series, 24 months
Handling
Do not drop CTVS components and allow them to be chipped.
Do not touch CTVS with your bare hands - gloves are recommended.
Avoid contamination of the CTVS surface during handling.
Mounting
When CTVS devices are encapsulated with sealing material or overmolded with plastic
material, electrical characteristics might be degraded and the life time reduced.
Make sure an electrode is not scratched before, during or after the mounting process.
Make sure contacts and housings used for assembly with CTVS components are clean before
mounting.
The surface temperature of an operating CTVS can be higher. Ensure that adjacent
components are placed at a sufficient distance from a CTVS to allow proper cooling.
Avoid contamination of the CTVS surface during processing.
Multilayer varistors (MLVs) with AgPd termination are not approved for lead-free soldering.
Soldering
Complete removal of flux is recommended to avoid surface contamination that can result in an
instable and/or high leakage current.
Use resin-type or non-activated flux.
Bear in mind that insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended, otherwise a component may crack.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 79 of 81
相关PDF资料
PDF描述
CN2220K25G VARISTOR 25VRMS 2220 SMD
FI-RE51S-VF CONN RCPT 0.5MM 51POS SMD
87832-5020 CONN HEADER 50POS 2MM VERT SMD
RV1206JR-0722ML RES 22M OHM 5% 1206 TF
V25S750P VARISTOR 750VRMS 22KA RADIAL
相关代理商/技术参数
参数描述
CN2220K40G 功能描述:VARISTOR 40VRMS 2220 SMD RoHS:是 类别:过电压,电流,温度装置 >> TVS - 变阻器,MOV 系列:CN 标准 标准包装:300 系列:RA 变阻器电压:68V 电流 - 浪涌:1kA 电路数:1 最大交流电压:40VAC 最大直流电压:56VDC 能量:13J 封装/外壳:径向,盒式
CN2220K50G 功能描述:VARISTOR 50VRMS 2220 SMD RoHS:是 类别:过电压,电流,温度装置 >> TVS - 变阻器,MOV 系列:CN 标准 标准包装:300 系列:RA 变阻器电压:68V 电流 - 浪涌:1kA 电路数:1 最大交流电压:40VAC 最大直流电压:56VDC 能量:13J 封装/外壳:径向,盒式
CN2220K60G 功能描述:VARISTOR 60VRMS 2220 SMD RoHS:是 类别:过电压,电流,温度装置 >> TVS - 变阻器,MOV 系列:CN 标准 标准包装:300 系列:RA 变阻器电压:68V 电流 - 浪涌:1kA 电路数:1 最大交流电压:40VAC 最大直流电压:56VDC 能量:13J 封装/外壳:径向,盒式
CN2220L17GK2 制造商:EPCOS 制造商全称:EPCOS 功能描述:Ceramic transient voltage suppressors
CN2220L8G 功能描述:VARISTOR 8VRMS 2220 SMD RoHS:是 类别:过电压,电流,温度装置 >> TVS - 变阻器,MOV 系列:CN 标准 标准包装:300 系列:RA 变阻器电压:68V 电流 - 浪涌:1kA 电路数:1 最大交流电压:40VAC 最大直流电压:56VDC 能量:13J 封装/外壳:径向,盒式