收藏本站
参数资料
型号： CONSMA012
厂商： Linx Technologies Inc
文件页数： 1/1页
文件大小： 0K
描述： CONN MALE CBL END CRIMP RG174 RA
产品目录绘图： CONxxxSMA012
标准包装： 100
系列： SMA
连接器类型： SMA
连接器类型： 插头，公引脚
触点终端： 压接
阻抗： 50 欧姆
安装类型： 自由悬挂，直角
紧固型： 有螺纹
缆线组： RG-174
频率 - 最大： 12.4GHz
包装： 散装
Description
Body
Pin
Insulation
Washer
Gasket
Crimp Ring
Material
Brass
Brass
PTFE
BE CU
SI Rubber
Brass
Finish
Nickel
Gold
N/A
Nickel
Rubber
Nickel
REV
B
C
REVISIONS
DESCRIPTION
Add Heat Shrink to Drawing
Updated dimensions; Added new title block
DATE
28-JUL-09
2-JUL-12
APPV
CJ
SAH
Insulator
Cover
Heat Shrink
PTFE
Brass
Polyole?n
N/A
Nickel
Black
0.650
[16.50]
?0.154
[3.90]
?0.185
[4.70]
0.051
[1.30]
COVER
0.055
[1.40]
?0.146
[3.70]
INSULATOR
0.287
[7.30]
0.287
[7.30]
0.331
[8.40]
1/4-36UNS-2B
THREADS
0.374
[9.50]
CRIMP RING
?0.197
[5.00]
CONSMA012 ASSEMBLY INSTRUCTIONS
1. Strip the cable to the recommended dimensions.
2. Slip heat shrink and crimp ring onto stripped cable.
2. Slide the cable into the body until the center conductor is
0.197
[5.00]
BARREL
0.787
[20.00]
centered in the fork.
3. Push the braided shield over the barrel.
4. Solder the center conductor into the center of the fork.
5. Slide the crimp ring over the shield and crimp with a 0.128”
?0.106
[2.70]
HEAT SHRINK
hex crimp tool (or one labeled for use with RG-174 cable).
6. Trim off any excess shield wire sticking out from the ring.
7. Slip the heat shrink over the crimp ring until it is against the
body and shrink.
?0.260
[6.60]
SIDE VIEW
NOTES: (UNLESS OTHERWISE SPECIFIED)
159 ORT LANE
MERLIN, OR 97532
SMA MALE RIGHT ANGLE
SIZE DWG. NO.
REV
1
4.75 [120.0]-12.40 [315.0]= .040 [1.0] ANGLES:
FINISH: CONSMA012 C
8. Insert insulator into body.
9. Push the cover into the opening.
0.063 0.071 0.217
[1.60] [1.80] [5.50]
RG-174 Cable
BRAIDED SHIELD
RECOMMENDED CABLE STRIPPING DIMENSIONS
1. ALL DIMENSIONS ARE IN INCHES [mm].
2. DIMENSIONS APPLY AFTER FINISHING.
3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE.
4. SAFETY BREAK ALL SHARP CORNERS AND EDGES .02 MAXIMUM.
: THIS DRAWING CONTAINS PROPRIETARY INFORMATION
THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE
TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS
DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE TITLE:
EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS
DESIGNATED AGENTS.
MATERIAL: TOLERANCES: PROJECTION: CABLE END CRIMP FOR RG174 CABLE
.020 [0.50]-.200 [5.00]= .008 [0.20]
.200 [5.00]-1.200 [30.00]= .016 [0.40]
1.20 [30.0]-4.75 [120.0]= .024 [0.60]
DRAWN: B.MURPHY DT: 2-JUL-12
ENGR: S.HOGAN
DT: 2-JUL-12
SCALE: 2:1
DO NOT SCALE DRAWING
SHEET 1 OF 1
LDCFDLT_A
相关PDF资料
PDF描述
CONSMA013.031 CONN MALE EDGE MT FOR .031" BD
CONSMA014-R178 CONN FML BULKHD MT O-RING RG-178
CONSMA014-R58 CONN FML BULKHD MT O-RING RG-58
CONSMA014 CONN FML BULKHD MT O-RING RG-174
CONSMA015 CONN FML BULKHD MT O-RING RG-174
相关代理商/技术参数
参数描述
CONSMA012-R178 功能描述:RF 连接器 SMA Mal R Angle Cbl End Crimp-RG-178 Cbl RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型:
CONSMA012-R58 功能描述:RF 连接器 SMA Mal R Angle Cbl End Crimp-RG-58 Cbl RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型:
CONSMA013.031 功能描述:RF 连接器 SMA Mal Edge Mnt for .031" Thick Brds RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型:
CONSMA013.062 功能描述:RF 连接器 SMA Mal Edge Mnt for .062" Thick Brds RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型:
CONSMA014 功能描述:RF 连接器 SMA Fml Blkhd RMnt Crimp, O-Ring, RG174 RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型:
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*