- 您现在的位置：买卖IC网 > PDF目录125740 > CRS03TQFREQDS1E (TEMEX COMPONENTS) CERAMIC RESONATOR, 1500 MHz - 3000 MHz PDF资料下载
参数资料
| 型号： | CRS03TQFREQDS1E |
| 厂商： | TEMEX COMPONENTS |
| 元件分类： | Ceramic Resonator |
| 英文描述： | CERAMIC RESONATOR, 1500 MHz - 3000 MHz |
| 文件页数： | 5/6页 |
| 文件大小： | 66K |
| 代理商： | CRS03TQFREQDS1E |
3-5
Vol. 1
SALES OFFICES: VISIT OUR WEB SITE AT
http://www.temex.net
CERAMIC COAXIAL RESONATORS
Application notes
SOLDERING RECOMMENDATIONS
Before any soldering operation is implemented, the coaxial resonator must be preheated in order
to avoid a thermal shock and a subsequent mechanical stress liable to initiate failure mechanism.
TEMEX recommends a minimum preheating time of 2 minutes at 120° C with a maximum heating rate
of 2° C / sec.
FREQUENCY ADJUSTMENT
When the frequency tuning adjustment is needed, two solutions can be adopted:
a)
Mechanical lapping of the ceramic, or mechanical grinding of metallization, depending where
metallization will be grinded off.
b)
Using a TEMEX air or sapphire dielectric tuning capacitor (“Air trimmer” or“Gigatrim”):
in this case, the frequency will decrease when capacitance will increase.
This provides an additional advantage of mounting / terminating resonator to the assembly
by utilizing the leg conguration of the tuning capacitor.
QUALITY FACTOR Q
The Q factor of a coaxial resonator is essentially determined by the metallization.
The dielectric material, having low losses, does not have a direct effect on the “Q” (secondary
inuence).
The curves show the range of “Q” factor versus resonator size and frequency range.
Curves show that Q min. increases as frequency increases (proportionally to
√Fo).
APPLICATION NOTES
相关PDF资料 |
PDF描述 |
|---|---|
| CSM1Z-A1B1C4120-FREQDS | QUARTZ CRYSTAL RESONATOR, 6 MHz - 7.999 MHz |
| CCL-SM7E13FT-FREQ | QUARTZ CRYSTAL RESONATOR, 9 MHz - 33 MHz |
| CC1A-T1A18.432MHZ20.0PF+/-100PPMTCQS | QUARTZ CRYSTAL RESONATOR, 18.432 MHz |
| CC1A-T1A18.432MHZ20.0PF+/-50PPMTCQS | QUARTZ CRYSTAL RESONATOR, 18.432 MHz |
| CCL-SM6E2SFT-FREQ3 | QUARTZ CRYSTAL RESONATOR, 6 MHz - 10 MHz |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CRS04 | 功能描述:肖特基二极管与整流器 40V 1A RoHS:否 制造商:Skyworks Solutions, Inc. 产品:Schottky Diodes 峰值反向电压:2 V 正向连续电流:50 mA 最大浪涌电流: 配置:Crossover Quad 恢复时间: 正向电压下降:370 mV 最大反向漏泄电流: 最大功率耗散:75 mW 工作温度范围:- 65 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-143 封装:Reel |
| CRS04(T5L,TEMQ) | 制造商:Toshiba 功能描述:Diode Schottky 40V 1A 2-Pin S-FLAT T/R Cut Tape 制造商:Toshiba 功能描述:Tape & Reel 制造商:Toshiba America Electronic Components 功能描述:Schottky Diode 40V 1A SBD 0.55V S-FLAT |
| CRS04(TE85L) | 制造商:Toshiba America Electronic Components 功能描述:Diode Schottky 40V 1A 2-Pin S-FLAT T/R 制造商:Toshiba America Electronic Components 功能描述:DIODE SCHOTTKY 40V 1A SFLAT |
| CRS04(TE85L,Q) | 功能描述:肖特基二极管与整流器 40V 1A RoHS:否 制造商:Skyworks Solutions, Inc. 产品:Schottky Diodes 峰值反向电压:2 V 正向连续电流:50 mA 最大浪涌电流: 配置:Crossover Quad 恢复时间: 正向电压下降:370 mV 最大反向漏泄电流: 最大功率耗散:75 mW 工作温度范围:- 65 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-143 封装:Reel |
| CRS04(TE85L,Q,M) | 功能描述:肖特基二极管与整流器 Diode Schottky 40V 1A Vf=0.55V RoHS:否 制造商:Skyworks Solutions, Inc. 产品:Schottky Diodes 峰值反向电压:2 V 正向连续电流:50 mA 最大浪涌电流: 配置:Crossover Quad 恢复时间: 正向电压下降:370 mV 最大反向漏泄电流: 最大功率耗散:75 mW 工作温度范围:- 65 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-143 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。