参数资料
型号: CS1301-7ERD8B2
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE
封装: METAL, CASE S02, MODULE
文件页数: 18/33页
文件大小: 438K
代理商: CS1301-7ERD8B2
S Series Data Sheet
100 Watt AC-DC and DC-DC Converters
APR 26, 2006 revised to SEP 25, 2006
Page 25 of 33
www.power-one.com
Load
1
2
S+
Vo+
Vo–
S–
Vi+
Vi–
T
Vi+
Vi–
S+
Vo+
Vo–
S–
T
1
Max. 5 converters in parallel connection
11036_012006
Converter
Fig. 29
Paralleling of single-output models using option T with the
sense lines connected at the load
1 Leads should have equal length and cross sections and should
run in the same cable loom.
2 Diodes for redundant operation.
Vo+
Vo–
Vo+
Vo–
Load
Vo+
Vo–
11003_102005
Fig. 28
An example of poor wiring for connections in parallel
(unequal length of load lines)
Option T: Current Sharing
This option ensures that the output currents are
approximately shared between all paralleled converters,
hence increasing system reliability. To use this facility,
simply interconnect the T pins of all converters and make
sure that the reference pins for the T-pin (S- for the S1000
or Vo1– for S2000) are also connected together. The load
lines should have equal length and cross section to ensure
equal voltage drops. Not more than 5 converters should be
connected in parallel. The R-pins should be left in an open-
circuit condition. If not, prior to paralleling the Vo1 outputs
should be individually adjusted within 1 to 2%. Parallel
connection
of
converters
with
option
P
is
not
recommended.
Option P: Potentiometer
The potentiometer allows for an output voltage adjustment
in the range of +10/–60% of Vo nom. It is accessible
through a hole in the front cover. This feature enables
compensation of voltage drops across the connector and
wiring. Option P is not recommended if models are
connected in parallel.
In double-output models both outputs are influenced by the
potentiometer setting. If option P is fitted, the R-pin 16 is
not connected.
Note: If the output voltage is increased above Vo nom via the
R-input control, option P setting, remote sensing, or option T,
the output current(s) should be reduced accordingly so that
Po nom is not exceeded.
Load
Max. 5 converters in parallel connection
+–
Power bus
Vo2–
Vo2+
Vo1–
Vo1+
T
Vo2–
Vo2+
Vo1–
Vo1+
T
Converter
11037_012006
Fig. 30
Paralleling of double output models with the outputs
connected in series, and using option T in an application
with a power bus. Note that the signal at the T-pins is
referenced to Vo1-.
相关PDF资料
PDF描述
CS1301-7ERDDB2 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE
CS1301-9ERD0TB2 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE
CS1501-7EPD9B2 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE
CS1501-7RD9TB2 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE
CS1501-9EPD2TB2 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
CS1301-7R 功能描述:EURO-CASSETTE 100W 12V RoHS:否 类别:电源 - 外部/内部(非板载) >> DC DC Converters 系列:* 标准包装:1 系列:Quint 类型:隔离 输入电压:24V 输出:24V 输出数:1 输出 - 1 @ 电流(最大):24 VDC @ 50A 输出 - 2 @ 电流(最大):- 输出 - 3 @ 电流(最大):- 输出 - 4 @ 电流(最大):- 功率(瓦特):1200W 安装类型:底座安装 工作温度:0°C ~ 40°C 效率:- 封装/外壳:模块 尺寸/尺寸:4.33" L x 9.09" W x 6.14" H(110mm x 231mm x 156mm) 包装:散装 电源(瓦特)- 最大:1200W 批准:- 其它名称:277-69722866365-NDQUINT-BAT/24DC/12AH
CS1301-9ER 制造商:Power-One 功能描述:DCDC - Bulk
CS1301-9ERB1 功能描述:DC/DC CONVERTER 12V 8A 制造商:bel power solutions 系列:Melcher S 包装:散装 零件状态:有效 类型:隔离 电压 - 输入:28 ~ 140 V 输出:12V 输出数:1 不同电流时的输出(最大值) - 1:12 VDC @ 8A 不同电流时的输出(最大值) - 2:- 不同电流时的输出(最大值) - 3:- 不同电流时的输出(最大值) - 4:- 功率(W):96W 应用:ITE(商业),铁路 安装类型:底座安装 工作温度:-40°C ~ 71°C 效率:83% 封装/外壳:- 大小/尺寸:6.73" 长 x 4.37" 宽 x 1.86" 高(171.0mm x 111.0mm x 47.2mm) 功率(W) - 最大值:96W 认可:cCSAus,CE,TUV 标准包装:1
CS13035 制造商:UNBRANDED 功能描述:HEADSET + MIC FOLDABLE
CS13-04GO4 制造商:未知厂家 制造商全称:未知厂家 功能描述:Netzthyristoren Phase control thyristors