参数资料
型号: CS3108A-12S-1S
厂商: Amphenol Industrial Operations
文件页数: 62/73页
文件大小: 0K
描述: CONN PLUG 2POS RT ANG W/SCKT
标准包装: 1
系列: CS,MIL-5015 衍生
连接器类型: 插头,母型插口
位置数: 2
外壳尺寸 - 插件: 12S-1
安装类型: 自由悬挂,直角
端子: 焊接
紧固型: 有螺纹
方向: N(正常型)
防护等级: 抗环境影响
外壳材料,表面处理: 草绿色,镀镉
触点表面涂层:
包装: 散装
工作温度: -55°C ~ 125°C
其它名称: CS3108A-12S-1S-ND
Assembly Instructions
for 10-305200 & 10-74900 cable clamps
The 10-305200 cable clamp and MS3420A sleeve illustrated are used only on
the rear of MS-A or C type connectors. The 10-74900 clamp and grommet
assembly can only be used on special feed-thru applications involving dummy
shells, part numbers 10-37090 and 10-113276.
10-305200 Cable Clamp & MS3420A Sleeve
ASSEMBLY
Both clamps are shipped from the factory with lubricant
conforming to MIL-G-3278. Remove any dirt or foreign
material from components with ethyl alcohol and relubri-
4
3
2
1
cate as outlined under “lubrication.” Place the clamping
nut (1) on the wire bundle or cable with the threads facing
toward the connector or dummy shell. Position the
tapered sleeve (2) on the bundle or cable with the narrow
portion toward the clamping nut (1). Next install either the
gland (3) used with the 10-305200 clamp or thread each
wire through the grommet (3) used with the 10-74900
1. Clamping Nut
2. Tapered Sleeve
3. Gland
4. Reducing or
Telescoping Sleeve
10-74900 Clamp and Grommet Assembly
clamp. Dependent on the application, the wire bundle or
cable is fed through the dummy shell, or the wire ends
are soldered to the connector contacts. Move the compo-
nents forward in the reverse order of preliminary assem-
bly. (In applications where grommets (3) are used, seat
the grommet against the undercut in the back shell
before bringing the tapered sleeve (2) up against it).
Insure proper positioning of glands (3) or grommets (3),
tapered sleeves (2) and clamping nuts (1). Tighten the
clamp using a strap wrench until a metal to metal seat is
obtained.
3
2
1
1. Clamping Nut
2. Tapered Sleeve
3. Grommet
61
相关PDF资料
PDF描述
IDT72V295L15PF8 IC FIFO SUPERSYNCII 15NS 64-TQFP
MS3101F22-9S CONN RCPT 3POS FREE HNG W/SCKT
NCV7356D2R2G IC TXRX CAN SGL WIRE 14-SOIC
ICL3232EIBNZ IC 2DRVR/2RCVR RS232 3V 16-SOIC
IDT72V2103L15PFG8 IC FIFO SUPERSYNCII 15NS 80-TQFP
相关代理商/技术参数
参数描述
CS3108A-12S-3S 功能描述:CONN PLUG 2POS RT ANG W/SCKT RoHS:否 类别:连接器,互连式 >> 圆形 系列:CS,MIL-5015 衍生 标准包装:1 系列:军用, MIL-DTL-38999 系列 I 连接器类型:插座,公形引脚 位置数:37 外壳尺寸 - 插件:15-35 外壳尺寸,MIL:- 安装类型:面板安装,法兰 端子:压接 紧固型:插销锁 方向:N(正常型) 防护等级:抗环境影响 外壳材料,表面处理:非电镀镍 触点表面涂层:金 特点:屏蔽 包装:散装 触点涂层厚度:50µin(1.27µm) 额定电流:5A 电压 - 额定:400VAC,500VDC 工作温度:-65°C ~ 200°C 配套产品:AMS27467T15F35S-ND - CONN PLUG 37POS STRAIGHT W/SCKTAMS27467E15F35S-ND - CONN PLUG 37POS STRAIGHT W/SCKT 其它名称:MS27466T15F35P-ND
CS3108A-12S-51P 功能描述:CONN PLUG 2POS RT ANG W/PINS RoHS:否 类别:连接器,互连式 >> 圆形 系列:CS,MIL-5015 衍生 标准包装:1 系列:军用, MIL-DTL-38999 系列 III, DTS 连接器类型:插头,公引脚 位置数:7 外壳尺寸 - 插件:11-99 外壳尺寸,MIL:B 安装类型:自由悬挂 端子:压接 紧固型:有螺纹 方向:E 防护等级:抗环境影响 外壳材料,表面处理:铝,镀镍 触点表面涂层:金 特点:屏蔽 包装:散装 触点涂层厚度:50µin(1.27µm) 额定电流:7.5A 电压 - 额定:- 工作温度:-65°C ~ 200°C 其它名称:DD38999/26FB99PE
CS3108A12S-51P 制造商:Amphenol Aerospace 功能描述:CIRCULAR, SIZE 12S, 2WAYS, PIN 制造商:Amphenol Corporation 功能描述:ER 2C 2#16S PIN PLUG
CS3108A-12S-51S 功能描述:CONN PLUG 2POS RT ANG W/SCKT RoHS:否 类别:连接器,互连式 >> 圆形 系列:CS,MIL-5015 衍生 产品培训模块:Mil-DTL-5015 and AC Threaded Connectors 标准包装:1 系列:军用, MIL-DTL-5015 连接器类型:插座,母形插口 位置数:7 外壳尺寸 - 插件:16S-1 外壳尺寸,MIL:- 安装类型:面板安装,法兰 端子:压接 紧固型:有螺纹 方向:N(正常型) 防护等级:防水 外壳材料,表面处理:不锈钢 触点表面涂层:银 特点:防火墙使用 包装:散装 触点涂层厚度:- 额定电流:- 电压 - 额定:500VAC,700VDC 工作温度:-55°C ~ 125°C 相关产品:APC1372-ND - STRAIN RELIEF STRGHT SHELL SZ 16APC1350-ND - STRAIN RELIEF STR SL SHELL SZ 16APC1332-ND - STRAIN RELIEF 90 DEG SHELL SZ 16APC1313-ND - STRAIN RLF 90 DEG 1.000-20 UNEF 其它名称:MS3450KS16S-1S-ND
CS3108A-12S-53S 功能描述:1 Position Circular Connector Plug, Female Sockets Solder Cup Silver 制造商:amphenol industrial operations 系列:CS,MIL-5015 衍生 包装:散装 零件状态:有效 连接器类型:插头,母型插口 针脚数:1 外壳尺寸 - 插件:12S-53 外壳尺寸,MIL:- 安装类型:自由悬挂,直角 端接:焊杯 紧固类型:有螺纹 朝向:N(正常型) 侵入防护:- 外壳材料,镀层:铝合金,草绿色,镀镉 触头镀层:银 特性:- 触头镀层厚度:- 额定电流:- 电压 - 额定:- 工作温度:-55°C ~ 125°C 标准包装:1