参数资料
型号: CS35L00-CNZ
厂商: CIRRUS LOGIC INC
元件分类: 音频/视频放大
中文描述: 2.7 W, 1 CHANNEL, AUDIO AMPLIFIER, PDSO10
封装: 3 X 3 MM, LEAD FREE, MO-220, DFN-10
文件页数: 7/34页
文件大小: 730K
代理商: CS35L00-CNZ
CS35L00
DS906PP1
15
5. APPLICATIONS
5.1
MODE Descriptions
The CS35L00 device can be operated in one of four operating modes, determined by the MODE pin and
the LFILT+ pin. The four modes of operation are Standard Class-D operation (SD), Reduced Frequency
Standard Class-D operation (FSD), Hybrid Class-D operation (HD), and Reduced Frequency Hybrid Class-
D operation (FHD). Each of these modes can be leveraged to optimize different performance criteria in an
array of applications.
Table 1. LFILT+ and MODE Operation Configurations
5.1.1
Standard Class D Modes of Operation
5.1.1.1
SD Mode
Standard Class-D (SD) mode supports full audio bandwidth with very good SNR and THD+N perfor-
mance. This mode of operation is characterized by a traditional closed loop, analog
ΔΣ modulated Class-
D amplifier. With an output switching frequency of 192 kHz, this mode ensures flat frequency response
across the entire audio frequency range.
5.1.1.2
FSD Mode
The Reduced Frequency Class-D (FSD) mode provides competitive audio performance and a reduction
in radiated emissions by decreasing the switching frequency of the output devices to 76 kHz. This reduc-
tion in switching frequency reduces the high frequency energy being created by the output switching
events. Idle channel noise is slightly higher in this mode of operation than SD mode, with the trade-off
being better EMI performance and power consumption.
5.1.2
Hybrid Class D Modes of Operation
Hybrid Class-D and Reduced Frequency Hybrid Class-D modes of operation allows the rail voltage for the
output devices to switch between a high voltage net and a low voltage net depending on the audio content
being amplified. This is explained in more detail in Section 5.1.2.1 and Section 5.1.2.2. Operation in these
modes requires that the voltage present on the VBATT pin be above the level listed as “VBATT Limit for
HD/FHD Mode (VBLIM)” in “Electrical Characteristics - All Operational Modes” on page 9. If it is not, HD
and FHD modes of operation of the device will automatically be disabled and operation will be limited to
the SD mode of operation.
MODE connected to:
GND
VBATT
LFI
L
T
+
co
nn
e
c
te
d
to
:
VBATT
Reduced Frequency Class-D Mode
(FSD)
Standard Class-D Mode
(SD)
Filter Cap to Ground
Reduced Frequency Hybrid Class-D Mode
(FHD)
Hybrid Class-D Mode
(HD)
相关PDF资料
PDF描述
CS4207-DNZR
CS4207-DNZ
CS4207-CNZR
CS4207-CNZ
CS42L52-DNZR
相关代理商/技术参数
参数描述
CS35L00-CNZR 功能描述:音频放大器 Low Power Amp RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel
CS35L01 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:2.9 W Mono Class-D Audio Amplifier with Low Idle Current
CS35L01-CWZ 功能描述:音频放大器 Mono Low Power Amp w/ +6dB Gain RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel
CS35L01-CWZR 功能描述:IC AMP AUD LP 3W MONO D 9WLCSP RoHS:是 类别:集成电路 (IC) >> 线性 - 音頻放大器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:DirectDrive® 类型:D 类 输出类型:1-通道(单声道),带立体声耳机 在某负载时最大输出功率 x 通道数量:930mW x 1 @ 8 欧姆; 40mW x 2 @ 16 欧姆 电源电压:2.7 V ~ 5.5 V 特点:消除爆音,差分输入,I²C,静音,关闭,音量控制 安装类型:表面贴装 供应商设备封装:25-WLP(2.09x2.09) 封装/外壳:25-WFBGA,WLCSP 包装:带卷 (TR) 其它名称:MAX97000EWA+T-ND
CS35L03 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:2.9 W Mono Class-D Audio Amplifier with Low Idle Current