- 您现在的位置：买卖IC网 > PDF目录10955 > CS4202-JQZ (Cirrus Logic Inc)IC AC 97 W/HEADPHONE AMP 48TQFP PDF资料下载
参数资料
| 型号： | CS4202-JQZ |
| 厂商： | Cirrus Logic Inc |
| 文件页数： | 11/66页 |
| 文件大小： | 0K |
| 描述： | IC AC 97 W/HEADPHONE AMP 48TQFP |
| 标准包装： | 250 |
| 类型： | 音频编解码器 '97 |
| 数据接口： | 串行 |
| 分辨率（位）： | 18，20 b |
| ADC / DAC 数量： | 1 / 1 |
| 三角积分调变： | 是 |
| 动态范围，标准 ADC / DAC (db)： | 90 / 90 |
| 电压 - 电源，模拟： | 4.75 V ~ 5.25 V |
| 电压 - 电源，数字： | 4.75 V ~ 5.25 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 48-LQFP |
| 供应商设备封装： | 48-TQFP（9x9） |
| 包装： | 管件 |
| 产品目录页面： | 754 (CN2011-ZH PDF) |
| 其它名称： | 598-1181 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页
Micrel, Inc.
MIC3001
August 2004
19
M9999-082404-A
hbwhelp@micrel.com or (408) 955-1690
Internal/External Calibration
The default mode of calibration in the MIC3001 is
external calibration, for which INTCAL bit (bit 0 in
OEMCF3 register) is set to 0. This mode is backward
compatible with MIC3000. The internal calibration mode
is selected by setting INTCAL bit to 1.
A/ External Calibration
The voltage and temperature values returned by the
MIC3001’s A/D converter are internally calibrated. The
binary values of TEMPh:TEMPl and VOLTh:VOLTl are
in the format called for by SFF-8472 under Internal
Calibration.
SFF-8472 calls for a set of calibration constants to be
stored by the transceiver OEM at specific non-volatile
memory locations, refer to SFF-8472 specifications for
memory map of calibration coefficient. The MIC3001
provides the non-volatile memory required for the
storage of these constants. The Digital Diagnostic
Monitoring Interface specification should be consulted for
full details. Slopes and offsets are stored for use with
voltage, temperature, bias current, and transmitted
power measurements. Coefficients for a fourth-order
polynomial are provided for use with received power
measurements. The host system can retrieve these
constants and use them to process the measured data.
Since voltage and temperature require no calibration, the
corresponding slopes should generally be set to unity
and the offsets to zero.
Voltage
The voltage values returned by the MIC3001’s A/D
converter are internally calibrated. The binary values of
VOLTh:VOLTl are in the format called for by SFF-8472
under Internal Calibration. Since VINh:VINl requires no
processing, the corresponding slope should be set to
unity and the offset to zero.
Temperature
The temperature values returned by the MIC3001’s A/D
converter are internally calibrated. The binary values of
TEMPh:TEMPl are in the format called for by SFF-8472
under Internal Calibration. Since TEMPh:TEMPl requires
no processing, the corresponding slope should be set to
unity and the offset to zero.
Bias Current
Bias current is sensed via an external sense resistor as
a voltage appearing at VILD+ and VILD-. The value
returned by the A/D is therefore a voltage analogous to
bias current. Bias current, IBIAS, is simply VVILD/RSENSE.
The binary value in IBIASh (IBIASl is always zero) is
related to bias current by:
(1)
The value of the least significant bit (LSB) of IBIASh is
given by:
(2)
Per SFF-8472, the value of the bias current LSB is 2A.
The conversion factor, “slope”, needed is therefore:
The tolerance of the sense resistor directly impacts the
accuracy of the bias current measurement. It is
recommended that the sense resistor chosen be 1%
accurate or better. The offset correction, if needed, can
be determined by shutting down the laser, i.e., asserting
TXDISABLE, and measuring the bias current. Any non-
zero result gives the offset required. The offset will be
equal and opposite to the result of the “zero current”
measurement.
TX Power
Transmit power is sensed via an external sense resistor
as a voltage appearing at VMPD. It is assumed that this
voltage is generated by a sense resistor carrying the
monitor photodiode current. In most applications, the
signal at VMPD will be feedback voltage on FB. The
VMPD voltage may be measured relative to GND or
VDDA depending on the setting of the BIASREF bit in
OEMCFG1. The value returned by the A/D is therefore a
voltage analogous to transmit power. The binary value in
TXOPh (TXOPl is always zero) is related to transmit
power by:
(3)
For a given implementation, the value of RSENSE is
known. It is either the value of the external resistor or the
chosen value of RFB used in the application. The
constant, K, will likely have to be determined through
experimentation or closed-loop calibration, as it depends
on the monitoring photodiode responsivity and coupling
efficiency.
It should be noted that the APC circuit acts to hold the
transmitted power constant. The value of transmit power
reported by the circuit should only vary by a small
amount as long as APC is functioning correctly.
相关PDF资料 |
PDF描述 |
|---|---|
| S9S12Q12J2VFAE1R | MCU 16BIT 48LQFP |
| FGG.1B.306.CLAD52Z | CONN PLUG 6POS STRGHT PIN SOLDER |
| CS4271-CZZ | IC CODEC AUD 24BIT 114DB 28TSSOP |
| MC9S12XEQ384CAL | MCU 16BIT 384K FLASH 112-LQFP |
| MCF51AC256BCLKE | MCU 32BIT 256K FLASH 80-LQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CS4202-JQZ | 制造商:Cirrus Logic 功能描述:Audio CODEC IC |
| CS4202-JQZ | 制造商:Cirrus Logic 功能描述:IC AUDIO CODEC 2CH AC97 W/HA |
| CS4202-JQZR | 功能描述:接口—CODEC IC AC’97 w/Headphone Amplifier RoHS:否 制造商:Texas Instruments 类型: 分辨率: 转换速率:48 kSPs 接口类型:I2C ADC 数量:2 DAC 数量:4 工作电源电压:1.8 V, 2.1 V, 2.3 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:DSBGA-81 封装:Reel |
| CS420-3 | 制造商:Captive Fastener Corporation 功能描述: |
| CS4205 | 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:CrystalClear Audio Codec 97 with Portable Computing |
发布紧急采购，3分钟左右您将得到回复。