参数资料
型号: CU3225K300G2K1
厂商: EPCOS Inc
文件页数: 33/35页
文件大小: 0K
描述: VARISTOR 300V RMS 3225 SMD
产品目录绘图: CU3225K Series_Max V Allowance 230~300 Side1
CU3225K Series_Max V Allowance 230~300 Side2
标准包装: 1
系列: CU
变阻器电压: 470V
电流 - 浪涌: 400A
电路数: 1
最大交流电压: 300VAC
最大直流电压: 385VDC
能量: 9.6J
封装/外壳: 3225(8063 公制)
产品目录页面: 2357 (CN2011-ZH PDF)
其它名称: 495-1465-6
SMD disk varistors (CU varistors)
Standard series
Specified values only apply to CTVS components that have not been subject to prior electrical,
mechanical or thermal damage. The use of CTVS devices in line-to-ground applications is
therefore not advisable, and it is only allowed together with safety countermeasures like
thermal fuses.
Storage
Only store CTVS in their original packaging. Do not open the package before storage.
Storage conditions in original packaging: temperature
25 to +45 ° C, relative humidity ≤ 75%
annual average, maximum 95%, dew precipitation is inadmissible.
Do not store CTVS devices where they are exposed to heat or direct sunlight. Otherwise the
packaging material may be deformed or CTVS may stick together, causing problems during
mounting.
Avoid contamination of the CTVS surface during storage, handling and processing.
Avoid storing CTVS devices in harmful environments where they are exposed to corrosive
gases for example (SO x , Cl).
Use CTVS as soon as possible after opening factory seals such as polyvinyl-sealed packages.
Solder CTVS components after shipment from EPCOS within the time specified:
CTVS with Ni barrier termination, 12 months
CTVS with AgPd and AgPt termination, 6 months
SHCV and CU series, 24 months
Handling
Do not drop CTVS components and allow them to be chipped.
Do not touch CTVS with your bare hands - gloves are recommended.
Avoid contamination of the CTVS surface during handling.
Mounting
When CTVS devices are encapsulated with sealing material or overmolded with plastic
material, electrical characteristics might be degraded and the life time reduced.
Make sure an electrode is not scratched before, during or after the mounting process.
Make sure contacts and housings used for assembly with CTVS components are clean before
mounting.
The surface temperature of an operating CTVS can be higher. Ensure that adjacent
components are placed at a sufficient distance from a CTVS to allow proper cooling.
Avoid contamination of the CTVS surface during processing.
Multilayer varistors (MLVs) with AgPd termination are not approved for lead-free soldering.
Soldering
Complete removal of flux is recommended to avoid surface contamination that can result in an
instable and/or high leakage current.
Use resin-type or non-activated flux.
Bear in mind that insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended, otherwise a component may crack.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 33 of 35
相关PDF资料
PDF描述
TA35-C344F100C0 CIRCUIT BRKR THERMAL 10A 2POLE
TA35-C321M120C0 CIRCUIT BRKR THERMAL 12A 2POLE
PPPC161LGBN-RC CONN FEMALE 16POS .100" R/A GOLD
PPPC052LJBN-RC CONN FEMALE 10POSDL .1" R/A GOLD
TA35-C323M060C0 CIRCUIT BRKR THERMAL 6A 2POLE
相关代理商/技术参数
参数描述
CU3225K30AUTOG2 制造商:EPCOS 制造商全称:EPCOS 功能描述:Monolithic; Automotive Series
CU3225K30G2 功能描述:VARISTOR STD 30VRMS 3225 SMD RoHS:是 类别:过电压,电流,温度装置 >> TVS - 变阻器,MOV 系列:CU 标准包装:400 系列:LU 变阻器电压:540V 电流 - 浪涌:6.5kA 电路数:1 最大交流电压:320VAC 最大直流电压:420VDC 能量:150J 封装/外壳:圆盘 20mm
CU3225K35G2 功能描述:VARISTOR STD 35VRMS 3225 SMD RoHS:是 类别:过电压,电流,温度装置 >> TVS - 变阻器,MOV 系列:CU 标准包装:400 系列:LU 变阻器电压:540V 电流 - 浪涌:6.5kA 电路数:1 最大交流电压:320VAC 最大直流电压:420VDC 能量:150J 封装/外壳:圆盘 20mm
CU3225K40G2 功能描述:VARISTOR STD 40VRMS 3225 SMD RoHS:是 类别:过电压,电流,温度装置 >> TVS - 变阻器,MOV 系列:CU 标准包装:400 系列:LU 变阻器电压:540V 电流 - 浪涌:6.5kA 电路数:1 最大交流电压:320VAC 最大直流电压:420VDC 能量:150J 封装/外壳:圆盘 20mm
CU3225K50G2 功能描述:VARISTOR STD 50VRMS 3225 SMD RoHS:是 类别:过电压,电流,温度装置 >> TVS - 变阻器,MOV 系列:CU 标准包装:400 系列:LU 变阻器电压:540V 电流 - 浪涌:6.5kA 电路数:1 最大交流电压:320VAC 最大直流电压:420VDC 能量:150J 封装/外壳:圆盘 20mm