参数资料
| 型号： | CU4032K14AUTOG2 |
| 厂商： | EPCOS Inc |
| 文件页数： | 22/30页 |
| 文件大小： | 0K |
| 描述： | VARISTOR AUTO 14VRMS 4032 SMD |
| 产品目录绘图： | CU4032K Series_Max V Allowance 11~175 Side1 CU4032K Series_Max V Allowance 11~175 Side2 |
| 标准包装： | 2,000 |
| 系列： | CU 汽车 |
| 变阻器电压： | 22V |
| 电流 - 浪涌： | 250A |
| 电路数： | 1 |
| 最大交流电压： | 14VAC |
| 最大直流电压： | 16VDC |
| 能量： | 0.02J |
| 封装/外壳： | 4032（1080 公制） |
| 其它名称： | B72660M1140K72 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页当前第22页第23页第24页第25页第26页第27页第28页第29页第30页
SMD disk varistors (CU varistors)
Automotive series
Note:
Leaching of the termination
Effective area at the termination might be lost if the soldering temperature and/or immersion time
are not kept within the recommended conditions. Leaching of the outer electrode should not ex-
ceed 25% of the chip end area (full length of the edge A-B-C-D) and 25% of the length A-B,
shown below as mounted on substrate.
As a single chip
As mounted on substrate
7
7.1
Notes for proper soldering
Preheating and cooling
According to JEDEC J-STD-020D. Please refer to chapter 2.
7.2
Repair / rework
Manual soldering with a soldering iron must be avoided, hot-air methods are recommended for
rework purposes.
7.3
Cleaning
All environmentally compatible agents are suitable for cleaning. Select the appropriate cleaning
solution according to the type of flux used. The temperature difference between the components
and cleaning liquid must not be greater than 100 ° C. Ultrasonic cleaning should be carried out
with the utmost caution. Too high ultrasonic power can impair the adhesive strength of the metal-
lized surfaces.
7.4
Solder paste printing (reflow soldering)
An excessive application of solder paste results in too high a solder fillet, thus making the chip
more susceptible to mechanical and thermal stress. Too little solder paste reduces the adhesive
strength on the outer electrodes and thus weakens the bonding to the PCB. The solder should be
applied smoothly to the end surface.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 30
相关PDF资料 |
PDF描述 |
|---|---|
| 43045-0613 | CONN HEADER 6POS 3MM VERT GOLD |
| RV1206FR-073ML | RES 3M OHM 1% 1206 TF |
| RV1206FR-07150KL | RES 150K OHM 1% 1206 TF |
| 951106-4620-AR-PR | CONN HEADER 6POS 2MM R/A SMD |
| RV1206FR-07316KL | RES 316K OHM 1% 1206 TF |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CU4032K14AUTOG2_11 | 制造商:EPCOS 制造商全称:EPCOS 功能描述:Ceramic transient voltage suppressors |
| CU4032K14G | 制造商:未知厂家 制造商全称:未知厂家 功能描述: |
| CU4032K14G2 | 功能描述:VARISTOR STD 14VRMS 4032 SMD RoHS:是 类别:过电压，电流，温度装置 >> TVS - 变阻器，MOV 系列:CU 标准包装:300 系列:RA 变阻器电压:68V 电流 - 浪涌:1kA 电路数:1 最大交流电压:40VAC 最大直流电压:56VDC 能量:13J 封装/外壳:径向，盒式 |
| CU4032K150G | 制造商:未知厂家 制造商全称:未知厂家 功能描述: |
| CU4032K150G2 | 功能描述:VARISTOR 150 RMS 4032 SMD RoHS:是 类别:过电压，电流，温度装置 >> TVS - 变阻器，MOV 系列:CU 标准包装:300 系列:RA 变阻器电压:68V 电流 - 浪涌:1kA 电路数:1 最大交流电压:40VAC 最大直流电压:56VDC 能量:13J 封装/外壳:径向，盒式 |
发布紧急采购，3分钟左右您将得到回复。