- 您现在的位置：买卖IC网 > Datasheet目录218 > CW2500 (ITW Chemtronics)EPOXY OVERCOAT 0.26OZ Datasheet资料下载
参数资料
| 型号： | CW2500 |
| 厂商： | ITW Chemtronics |
| 文件页数： | 4/9页 |
| 文件大小： | 0K |
| 描述： | EPOXY OVERCOAT 0.26OZ |
| 产品培训模块： | Circuit Works Product Overview |
| MSDS 材料安全数据表： | CW2500 Part A MSDS CW2500 Part B MSDS |
| 特色产品： | CircuitWorks? Epoxy Overcoat |
| 标准包装： | 12 |
| 系列： | CircuitWorks® |
| 附件类型： | 环氧树脂外涂层 |
CircuitWorks? Epoxy Overcoat Part B
7. Handling and storage
Storage
: Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials
(see Section 10) and food and drink. Keep container tightly closed and sealed until
ready for use. Containers that have been opened must be carefully resealed and kept
upright to prevent leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination.
8. Exposure controls/personal protection
Ingredient
3,6-diazaoctanethylenediamin
Recommended monitoring
procedures
Engineering measures
Hygiene measures
Exposure limits
AIHA WEEL (United States, 10/2011). Absorbed through skin.
TWA: 1 ppm 8 hours.
: If this product contains ingredients with exposure limits, personal, workplace
atmosphere or biological monitoring may be required to determine the effectiveness of
the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to appropriate monitoring standards.
Reference to national guidance documents for methods for the determination of
hazardous substances will also be required.
: Good general ventilation should be sufficient to control worker exposure to airborne
contaminants.
: Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Personal protection
Respiratory
Hands
Eyes
Skin
Environmental exposure
controls
: Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
: Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check
during use that the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be different for different
glove manufacturers. In the case of mixtures, consisting of several substances, the
protection time of the gloves cannot be accurately estimated.
: Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists or
dusts. If contact is possible, the following protection should be worn, unless the
assessment indicates a higher degree of protection: chemical splash goggles.
: Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
: Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
10/22/2013.
2500-B
4/9
相关PDF资料 |
PDF描述 |
|---|---|
| CW7000 | BA DISPENSING PENS 2 PER PACKAGE |
| CWI45-B-155.52M | CRY 155.25M 50PPM TH |
| CWR06NC105MR | CAP TANT 1UF 50V 20% 2010 |
| CWR15FK225KCLC | CAP TANT 2.2UF 10% 10V 0603 |
| CWR29KC336KCXC | CAP TANT 33UF 25V 10% 2721 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CW2501M | 制造商:POWERBOX 制造商全称:Powerbox 功能描述:800-2500VA PROGRAMMABLE AC POWER SERIES |
| CW2501P | 制造商:POWERBOX 制造商全称:Powerbox 功能描述:800-2500VA PROGRAMMABLE AC POWER SERIES |
| CW2517-000 | 制造商:TE Connectivity 功能描述:D-436-82-CS4023 |
| CW252016 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:CW252016 Series - High Q Chip Inductors |
| CW252016_11 | 制造商:BOURNS 制造商全称:Bourns Electronic Solutions 功能描述:High Q Chip Inductors |
发布紧急采购，3分钟左右您将得到回复。