- 您现在的位置：买卖IC网 > PDF目录380119 > CY2273APVC-3 (CYPRESS SEMICONDUCTOR CORP) Pentium㈢/II, 6x86, K6 Clock Synthesizer/Driver for Desktop PCs with Intel 82430TX, 82440LX or ALI IV/IV+, AGP and 3 DIMMs PDF资料下载
参数资料
| 型号： | CY2273APVC-3 |
| 厂商： | CYPRESS SEMICONDUCTOR CORP |
| 元件分类： | XO, clock |
| 英文描述： | Pentium㈢/II, 6x86, K6 Clock Synthesizer/Driver for Desktop PCs with Intel 82430TX, 82440LX or ALI IV/IV+, AGP and 3 DIMMs |
| 中文描述： | 66.67 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO48 |
| 封装： | SSOP-48 |
| 文件页数： | 12/14页 |
| 文件大小： | 178K |
| 代理商： | CY2273APVC-3 |
CY2273A
12
Application Information
Clock traces must be terminated with either series or parallel termination, as they are normally done.
Application Circuit
Summary
A parallel-resonant crystal should be used as the reference to the clock generator. The operating frequency and C
of
this crystal should be as specified in the data sheet. Optional trimming capacitors may be needed if a crystal with a different
C
LOAD
is used. Footprints must be laid out for flexibility.
Surface mount, low-ESR, ceramic capacitors should be used for filtering. Typically, these capacitors have a value of 0.1
μ
F.
In some cases, smaller value capacitors may be required.
The value of the series terminating resistor satisfies the following equation, where R
is the loaded characteristic impedance
of the trace, R
out
is the output impedance of the clock generator (specified in the data sheet), and R
series
is the series terminating
resistor.
R
series
> R
trace
– R
out
Footprints must be laid out for optional EMI-reducing capacitors, which should be placed as close to the terminating resistor
as is physically possible. Typical values of these capacitors range from 4.7 pF to 22 pF.
A Ferrite Bead
may
be used to isolate the Board V
from the clock generator V
island. Ensure that the Ferrite Bead offers
greater than 50
impedance at the clock frequency, under loaded DC conditions. Please refer to the application note “Layout
and Termination Techniques for Cypress Clock Generators” for more details.
If a Ferrite Bead is used, a 10
μ
F– 22
μ
F tantalum bypass capacitor should be placed close to the Ferrite Bead. This capacitor
prevents power supply droop during current surges.
相关PDF资料 |
PDF描述 |
|---|---|
| CY2280PVC-1 | 100-MHz Pentium II Clock Synthesizer/Driver with Spread Spectrum for Mobile or Desktop PCs |
| CY2280PVC-11S | 100-MHz Pentium II Clock Synthesizer/Driver with Spread Spectrum for Mobile or Desktop PCs |
| CY2280PVC-21S | 100-MHz Pentium II Clock Synthesizer/Driver with Spread Spectrum for Mobile or Desktop PCs |
| CY2280 | 100-MHz Pentium II Clock Synthesizer/Driver with Spread Spectrum for Mobile or Desktop PCs |
| CY2285PVC-2 | 100-MHz Pentium㈢II Clock Synthesizer/Driver with Spread Spectrum for Mobile PCs |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CY2273APVC-4 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| CY2273PVC-1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:CPU System Clock Generator |
| CY2273PVC-2 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:CPU System Clock Generator |
| CY2273PVC-3 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:CPU System Clock Generator |
| CY2274APVC1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Interface IC |
发布紧急采购，3分钟左右您将得到回复。