参数资料
| 型号： | D-150-0214 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/2页 |
| 文件大小： | 0K |
| 描述： | CONN SPLICE BUTT 12-16AWG BLACK |
| 标准包装： | 50 |
| 系列： | SolderShield |
| 端子类型： | 对接接头，直插式，单独开口 |
| 导线入口数目： | 2 |
| 端子： | 压接 |
| 线规： | 12-16 AWG |
| 绝缘体： | 完全绝缘 |
| 特点： | 热收缩 |
| 颜色： | 黑 |
| 包装： | 散装 |
| 其它名称： | 5-1197449-9 |
SPECIFICATION CONTROL DRAWING
INSTALLATION PROCEDURE:
1. Prepare cable as shown in the diagram. Tolerance on all dimensions is ± 0.76 (0.030).
2. Place items 1, 2, 4 and 3 onto one of the cables in sequence listed.
3. Crimp conductors into opposite ends of the crimp splice using a calibrated Raychem AD-1377.
4. Place the Filler Sleeve (shortest sleeve) over crimp and heat, using a Raychem approved hot air heater and reflector, until
sleeve recovers onto crimp.
5. Center the Insulator over the splice and recover it onto cable.
6. Position the Shield Splice so that an equal amount of cable braid is exposed between the sleeve shield and the cable jacket.
7. Start in center of sleeve and heat until the solder melts and the sleeve recovers. Move assembly through the heat slowly
enough to keep the solder melting and the sleeve recovers. Heat overlap portion of shields 5 to 10 extra seconds to ensure
adequate heat transfer to cable shield. Then move back to center and heat toward other end of sleeve.
8. Center the Sealing Sleeve over assembly and heat to recover the sleeve and melt the adhesive. Start in center and work toward
ends.
Tyco Electronics Corporation
305 Constitutional Drive
Menlo Park, CA 94025 USA
RAYCHEM
Products
TITLE :
SPLICE KIT, COAXIAL CABLE,
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets.
DOCUMENT NO.:
D-150-0214
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for
their application.
DATE:
May 29, 2001
DOC ISSUE:
1
DRAWN BY:
M. FORONDA
REPLACES:
N/A
DCR NUMBER:
D010126
PROD. REV.
A
SCALE:
None
SIZE:
A
SHEET:
2 of 2
If this document is printed it becomes uncontrolled. Check for the latest revision.
相关PDF资料 |
PDF描述 |
|---|---|
| D-150-0238 | CONN SPLICE BUTT 12-14AWG YLW |
| D-200-84 | CONN SPLICE BUTT 12-16AWG YELLOW |
| D-406-0001CS100 | SPLICE BUTT 22-18AWG CRIMP RED |
| D-436-0110 | CONN SPLICE BUTT 20-26AWG RED |
| D-436-0115 | CONN SPLICE BUTT 304-1510CMA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| D-150-0228 | 功能描述:焊料和屏蔽管 RoHS:否 制造商:TE Connectivity / Raychem 类型:Shield Terminators 材料:Polyvinylidene Fluoride 内径:5.08 mm 长度:16.5 mm 最低收缩温度: 系列:S03 |
| D-150-0228CS2075 | 功能描述:焊料和屏蔽管 RoHS:否 制造商:TE Connectivity / Raychem 类型:Shield Terminators 材料:Polyvinylidene Fluoride 内径:5.08 mm 长度:16.5 mm 最低收缩温度: 系列:S03 |
| D-150-0228CS2936 | 功能描述:焊料和屏蔽管 RoHS:否 制造商:TE Connectivity / Raychem 类型:Shield Terminators 材料:Polyvinylidene Fluoride 内径:5.08 mm 长度:16.5 mm 最低收缩温度: 系列:S03 |
| D-150-0228-NR | 制造商:TE Connectivity 功能描述:A25672-000 |
| D-150-0228-NRCS2896 | 功能描述:焊料和屏蔽管 RoHS:否 制造商:TE Connectivity / Raychem 类型:Shield Terminators 材料:Polyvinylidene Fluoride 内径:5.08 mm 长度:16.5 mm 最低收缩温度: 系列:S03 |
发布紧急采购，3分钟左右您将得到回复。