参数资料
| 型号： | D-436-43 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/4页 |
| 文件大小： | 0K |
| 描述： | CONN SPLICE BUTT 18-22AWG YLW |
| 标准包装： | 500 |
| 端子类型： | 对接接头，直插式，单独开口 |
| 导线入口数目： | 多种不同的导线规格 |
| 端子： | 压接 |
| 线规： | 18-22 AWG |
| 绝缘体： | 完全绝缘 |
| 特点： | 热收缩 |
| 颜色： | 蓝，黄条纹 |
| 包装： | 散装 |
| 其它名称： | 5-1195131-6 650073-000 |
SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene
flouride.
2. INTEGRAL MULTI-WIRE SEAL: Modified thermoplastic.
3. SEPARATE MULTI-WIRE SEAL: Modified thermoplastic.
4. CRIMP SPLICER: Base Metal: Copper Alloy 101 or 102 per ASTM B-75.
Plating: Tin per MIL-T-10727, Type 1.
Color Code: See table below.
Dimensions: Crimp Splice
Installation Data: Wire Size Range of Crimp Splicer
Part
Prod.
I.D.±0.05 O.D.±0.08 Color
Two Wires Three Wires
Name
Rev.
(I.D.±0.002) (O.D.±0.003) Code
Minimum Maximum
Minimum Maximum
D-436-42
F
1.70 (0.067) 2.62 (0.103) Blue
2 x 24 2 x 20 3 x 24 3 x 22
D-436-43
A
2.54 (0.100) 3.81 (0.150) Yellow
2 x 22
2 x 16 3 x 22 3 x 18
APPLICATION
1. These parts are designed to provide an immersion resistant in-line splices of 2 or 3 to 2 or 3 wires falling within
the size range listed above, having insulations rated for at least 135 ? C.
2. Parts are available only as an assembly of one of each Item #1 and Item #2.
3. Crimp splicer may be installed with Raychem AD-1377 crimp tool or equivalent.
4. Inside diameter and outside diameter of splice are to be measured in crimp area, 2.54 to 5.08 (0.100 to 0.200)
from ends of part. Slight burr permitted on parted surfaces.
5. Acceptance sampling shall be in accordance with paragraph 4.6.1 of MIL-T-7928.
6 . Packing and packaging shall be in accordance with Section 5, Level C, of MIL-T-7928.
7. This document takes precedence over documents referenced herein.
1.0
TEST ASSEMBLIES
TE Connectivity
305 Constitution Drive
Menlo Park, CA 94025, USA
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
Raychem
Products
DOCUMENT NO.:
TITLE :
IN-LINE SPLICE SEALING
SYSTEM, MULTI-WIRE
D-436-42/-43
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
ROUGHNESS IN
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
15-Apr-11
DOC ISSUE:
2
0 N/A
MICRON
DRAWN BY:
M. FORONDA
REPLACES:
N/A
DCR NUMBER:
D001303
PROD. REV.
SEE TABLE
SCALE:
None
SIZE:
A
SHEET:
1 of 4
If this document is printed it becomes uncontrolled. Check for the latest revision.
相关PDF资料 |
PDF描述 |
|---|---|
| D-436-53 | CONN SPLICE BUTT 16-24AWG YLW |
| D-436-60 | CONN SPLICE PARA 779-2680CMA |
| D-436-78 | CONN SPLICE PARA 1900-6755CMA |
| D-436-87 | CONN SPLICE BUTT 12AWG BLU/YLW |
| D-436-88 | CONN SPLICE BUTT 24-28AWG RED |
相关代理商/技术参数 |
参数描述 |
|---|---|
| D-436-43CS2021 | 制造商:TE Connectivity 功能描述:6-1195131-1 |
| D-436-43CS246 | 制造商:TE Connectivity 功能描述:D-436-43CS246 |
| D-436-43CS2908 | 制造商:TE Connectivity 功能描述:D-436-43CS2908 |
| D-436-45 | 制造商: 功能描述: 制造商:undefined 功能描述: 制造商:TE Connectivity 功能描述:650080-000 |
| D-436-46 | 功能描述:热收缩管和套管 D-436 SER PVDF RoHS:否 制造商:3M Electronic Specialty 类型:Tubing 材料:Polyolefin, Flexible 颜色:Clear 最低收缩温度:+ 100 C 恢复直径: 长度:100 ft 内径:1.5 in 收缩率:2:1 |
发布紧急采购，3分钟左右您将得到回复。