参数资料
型号: D2JW-01K11
厂商: Omron Electronics Inc-EMC Div
文件页数: 5/6页
文件大小: 0K
描述: SWITCH BASIC SPDT .1A 82GF
产品培训模块: Snap Switches
Medical Solutions
标准包装: 750
系列: D2JW
电路: 单刀双掷
开关功能: 开-瞬时
触点额定电压: 0.1A @ 30VDC
触动器类型: 按片,直形
安装类型: 底座安装
端接类型: 焊片
操作力: 82gf
其它名称: D2JW-01K11-ND
D2JW01K11
SW1160
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Protection against chemicals
Prevent the switch from coming into contact with oil and chemicals.
Otherwise, damage to or deterioration of switch materials may result.
Because the switch uses polycarbonate resin as material for its com-
ponent parts, contact OMRON if the switch material is likely to deteri-
orate due to adherence of oil or chemicals to the switch housing.
■ Soldering
To solder the lead to the terminal, apply a soldering iron rated at
30 W max. (temperature of soldering iron: 250°C max.) for no more
than 3 seconds.
Note that if soldering is not carried out under the proper conditions, there
is a danger of over-heating and subsequent heat damage.
Applying a soldering iron for more than three seconds or using one that
is rated at more than 30 W may degrade the switch characteristics.
■ Operation
Make sure that the operating body pushes the switch actuator with
an adequate force when the switch is to be operated, and that it does
not touch the actuator when the switch is released.
Install the pin plunger switch so that the operating force is applied in
alignment with the stroke of the actuator.
Do not apply excessive force to the actuator; otherwise, the switch
may be damaged.
■ Degree of Protection
The D2JW satisfies the following test condition specified by the IEC
Publication 529 (Degree of Protection by Enclosure):
Degree of protection: IP67
Test method: See the figure below.
Leave the test piece in water for 30 minutes with the top of the test
piece submerged 15 cm or more below the water level and the bot-
tom of the test piece submerged 1 m or more below the water level.
This test is to check the ingress of water into the switch enclosure
after submerging the switch in water for a given time. Note that even
if this test condition is met, the switch cannot be used in water.
■ Separator
When mounting the switch on a metallic surface, be sure to provide a
separator between the switch and the mounting plates.
Reference the following dimensions when designing the separator;
T w o, 2.4 ± 0.1 dia.
10.4
5.2
4.8 ±0.05
12
t=0.1 8
Sealed Snap Action Switch
D2JW
193
相关PDF资料
PDF描述
P51-75-G-S-MD-5V-000-000 SENSOR 75PSI 1/4-18NPT 1-5V
P51-50-G-S-MD-5V-000-000 SENSOR 50PSI 1/4-18NPT 1-5V
ASDMB-1.8432MHZ-LC-T OSC MEMS 1.8432 MHZ SMD
P51-15-G-S-MD-5V-000-000 SENSOR 15PSI 1/4-18NPT 1-5V
P51-75-G-R-MD-5V-000-000 SENSOR 75PSI M12-1.0 6G 1-5V
相关代理商/技术参数
参数描述
D2JW-01-K11 制造商:Omron Electronic Components LLC 功能描述:Ultra submin sealed sw,IP50 hinge lever
D2JW-01K11 制造商:Omron Electronic Components LLC 功能描述:MICROSWITCH LEVER
D2JW01K11L 制造商:Omron Electronic Components LLC 功能描述:IMMERSION-PROOF BASIC SWITCH - Trays
D2JW-01K11L 功能描述:基本/快动开关 SPDT 1A 12VDC RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel
D2JW01K11MD 制造商:Omron Electronic Components LLC 功能描述:SWIT SA NO/NC SPDT HINGE LVR WIRE LEAD 0.1A 30VDC 0.8N TH - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH BASIC SPDT .1A 82GF 制造商:Omron Electronic Components LLC 功能描述:MICROSWITCH IP67 0.1A HINGE 制造商:Omron Electronic Components LLC 功能描述:MICROSWITCH, IP67, 0.1A, HINGE LEVER 制造商:Omron Electronic Components LLC 功能描述:Switch Snap Action N.O./N.C. SPDT Hinge Lever Wire Lead 0.1A 30VDC 0.8N Screw Mount