- 您现在的位置：买卖IC网 > PDF目录21928 > D2JW-01K11L (Omron Electronics Inc-EMC Div)IMMERSION-PROOF BASIC SWITCH PDF资料下载
参数资料
| 型号： | D2JW-01K11L |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 5/6页 |
| 文件大小： | 0K |
| 描述： | IMMERSION-PROOF BASIC SWITCH |
| 产品培训模块： | Snap Switches |
| 标准包装： | 750 |
| 系列： | D2JW |
| 电路： | 单刀双掷 |
| 开关功能： | 开-瞬时 |
| 触点额定电压： | 0.1A @ 30VDC |
| 触动器类型： | 按片，直形 |
| 安装类型： | 底座安装 |
| 端接类型： | 焊片 |
| 操作力： | 82gf |
| 其它名称： | D2JW01K11L |
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Protection against chemicals
Prevent the switch from coming into contact with oil and chemicals.
Otherwise, damage to or deterioration of switch materials may result.
Because the switch uses polycarbonate resin as material for its com-
ponent parts, contact OMRON if the switch material is likely to deteri-
orate due to adherence of oil or chemicals to the switch housing.
■ Soldering
To solder the lead to the terminal, apply a soldering iron rated at
30 W max. (temperature of soldering iron: 250°C max.) for no more
than 3 seconds.
Note that if soldering is not carried out under the proper conditions, there
is a danger of over-heating and subsequent heat damage.
Applying a soldering iron for more than three seconds or using one that
is rated at more than 30 W may degrade the switch characteristics.
■ Operation
Make sure that the operating body pushes the switch actuator with
an adequate force when the switch is to be operated, and that it does
not touch the actuator when the switch is released.
Install the pin plunger switch so that the operating force is applied in
alignment with the stroke of the actuator.
Do not apply excessive force to the actuator; otherwise, the switch
may be damaged.
■ Degree of Protection
The D2JW satisfies the following test condition specified by the IEC
Publication 529 (Degree of Protection by Enclosure):
Degree of protection: IP67
Test method: See the figure below.
Leave the test piece in water for 30 minutes with the top of the test
piece submerged 15 cm or more below the water level and the bot-
tom of the test piece submerged 1 m or more below the water level.
This test is to check the ingress of water into the switch enclosure
after submerging the switch in water for a given time. Note that even
if this test condition is met, the switch cannot be used in water.
■ Separator
When mounting the switch on a metallic surface, be sure to provide a
separator between the switch and the mounting plates.
Reference the following dimensions when designing the separator;
T w o, 2.4 ± 0.1 dia.
10.4
5.2
4.8 ±0.05
12
t=0.1 8
Sealed Snap Action Switch
D2JW
193
相关PDF资料 |
PDF描述 |
|---|---|
| NFL21SP157X1C3D | FILTER LC HIGH FREQ 28PF 0805 |
| AS5030-ATSU | IC ENCODER ROTARY 8-BIT 16-TSSOP |
| AS5215OM-HMFP | IC ENCODER PROG 32-VQFN |
| NSE-5310-ASST | IC ENCODER LINEAR 20-TSSOP |
| D2RV-G | BASIC SWITCH |
相关代理商/技术参数 |
参数描述 |
|---|---|
| D2JW01K11MD | 制造商:Omron Electronic Components LLC 功能描述:SWIT SA NO/NC SPDT HINGE LVR WIRE LEAD 0.1A 30VDC 0.8N TH - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH BASIC SPDT .1A 82GF 制造商:Omron Electronic Components LLC 功能描述:MICROSWITCH IP67 0.1A HINGE 制造商:Omron Electronic Components LLC 功能描述:MICROSWITCH, IP67, 0.1A, HINGE LEVER 制造商:Omron Electronic Components LLC 功能描述:Switch Snap Action N.O./N.C. SPDT Hinge Lever Wire Lead 0.1A 30VDC 0.8N Screw Mount |
| D2JW-01K11-MD | 功能描述:基本/快动开关 Hinge Lever Lead Wire 82g RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| D2JW01K1A1 | 制造商:Omron Electronic Components LLC 功能描述:SWIT SA NO/NC SPDT SHORT HINGE LVR SLDR 0.1A 30VDC 1.15N TH - Trays 制造商:Omron Electronic Components LLC 功能描述:Switch Snap Action N.O./N.C. SPDT Short Hinge Lever Solder 0.1A 30VDC 1.15N Screw Mount |
| D2JW-01K1A1 | 功能描述:基本/快动开关 Short Hinge Lever Solder 117g RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| D2JW01K1A1MAD22 | 制造商:Omron Electronic Components LLC 功能描述:RELAYS MISC. - Bulk |
发布紧急采购，3分钟左右您将得到回复。