- 您现在的位置：买卖IC网 > PDF目录21907 > D2SW-P01L1-2M (Omron Electronics Inc-EMC Div)SWITCH 0.1A LEVER SPST-NC WIRES PDF资料下载
参数资料
| 型号： | D2SW-P01L1-2M |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 6/8页 |
| 文件大小： | 0K |
| 描述： | SWITCH 0.1A LEVER SPST-NC WIRES |
| 标准包装： | 1 |
| 系列： | * |
| 其它名称： | D2SWP01L12M |
■ Cautions
Degree of Protection
Do not use this product in water. Although these models satisfy the
test conditions for the standard given below, this test is to check the
ingress of water into the switch enclosure after submerging the
Switch in water for a given time. Satisfying this test condition does
not mean that the Switch can be used in water.
IEC 60529: 2001 Degrees of protection provided by enclosures (IP
Code)
Code: IP67 (The test to meet the standard checks for water intrusion
after immersion for 30 minutes.)
Do not operate the Switch when it is exposed to water spray, or when
water drops adhere to the Switch surface, or during sudden tempera-
ture changes, otherwise water may intrude into the interior of the
Switch due to a suction effect.
Prevent the Switch from coming into contact with oil and chemicals.
Otherwise, damage to or deterioration of Switch materials may result.
Do not use the Switch in areas where it is exposed to silicon
adhesives, oil, or grease, otherwise faulty contact may result due to
the generation of silicon oxide.
The environment-resistant performance of the switch differs
depending on operating loads, ambient atmospheres, and installation
conditions, etc. Please perform an operating test of the switch in
advance under actual usage conditions.
Connecting to Terminals
Connecting to Solder Terminals
When soldering the lead wire to the terminal, first insert the lead wire
conductor through the terminal hole and the conduct soldering.
Make sure that the temperature at the tip of the soldering iron is
350 to 400 ° C. Do not take more than 3 seconds to solder the switch
terminal, and do not impose external force on the terminal for 1 min.
after soldering. Improper soldering involving an excessively high tem-
perature or excessive soldering time may deteriorate the characteris-
tics of the Switch.
Connecting to Quick-connect Terminals
Wire the quick-connect terminals (#110) with receptacles. Insert the
terminals straight into the receptacles. Do not impose excessive
force on the terminal in the horizontal direction, otherwise the termi-
nal may be deformed or the housing may be damaged.
Connecting to PCB Terminal Boards
When using automatic soldering baths, we recommend soldering at
260 ± 5 ° C within 5 seconds. Make sure that the liquid surface of the
solder does not flow over the edge of the board.
When soldering by hand, as a guideline, solder with a soldering iron
with a tip temperature of 350 to 400 ° C within 3 seconds, and do not
apply any external force for at least 1 minute after soldering. When
applying solder, keep the solder away from the case of the Switch
and do not allow solder or flux to enter the case.
Side-actuated (Cam/Dog) Operation
When using a cam or dog to operate the Switch, factors such as the
operating speed, operating frequency, push-button indentation, and
material and shape of the cam or dog will affect the durability of the
Switch. Confirm performance specifications under actual operation
conditions before using the Switch in applications.
206
Sealed Subminiature Basic Switch
D2SW-P
相关PDF资料 |
PDF描述 |
|---|---|
| NFW31SP506X1E4L | FILTER LC HIGH FREQ 1206 |
| NFW31SP307X1E4L | FILTER LC HIGH FREQ 1206 |
| 62S11-M0-P | ENCODER OPT 32POS PC MNT |
| 7W-16.000MBA-T | OSC 16.000 MHZ 3.3V SMT |
| NFW31SP207X1E4L | FILTER LC HIGH FREQ 1206 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| D2SWP01L1B | 制造商:Omron Electronic Components LLC 功能描述:SUBMINIATURE BASIC SWITCH - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH 0.1A LEVER SPDT PC MNT |
| D2SW-P01L1B | 功能描述:基本/快动开关 Subminiature RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| D2SW-P01L1D | 制造商:Omron Corporation 功能描述:MICROSWITCH SPDT 0.1A SIM LEVER PCB 制造商:Omron Corporation 功能描述:MICROSWITCH, SPDT, 0.1A, SIM LEVER, PCB 制造商:Omron Corporation 功能描述:MICROSWITCH, SPDT, 0.1A, SIM LEVER, PCB, Contact Configuration:SPDT, Microswitch |
| D2SWP01L1H | 制造商:Omron Electronic Components LLC 功能描述:SWIT SA NO/NC SPDT HINGE LVR SLDR 0.1A 125VAC 30VDC 0.6N TH - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH 0.1A SPDT LEVER SEAL SLD |
| D2SW-P01L1H | 功能描述:基本/快动开关 Subminiature Basic Switch RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
发布紧急采购，3分钟左右您将得到回复。