- 您现在的位置：买卖IC网 > PDF目录18874 > D2SW-P01L3B (Omron Electronics Inc-EMC Div)SWITCH SIM ROLLER SPDT .1A PCB PDF资料下载
参数资料
| 型号： | D2SW-P01L3B |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 5/8页 |
| 文件大小： | 0K |
| 描述： | SWITCH SIM ROLLER SPDT .1A PCB |
| 产品培训模块： | Snap Switches |
| 产品目录绘图： | D2SW-P Series D2SW-PCB_15.8-sim roller |
| 标准包装： | 100 |
| 系列： | D2SW-P |
| 电路： | 单刀双掷 |
| 开关功能： | 开-瞬时 |
| 触点额定电压： | 0.1A @ 30VDC |
| 触动器类型： | 按片，仿真滚轴 |
| 安装类型： | 通孔 |
| 端接类型： | PC 引脚 |
| 操作力： | 61gf |
| 产品目录页面： | 2539 (CN2011-ZH PDF) |
| 其它名称： | D2SWP01L3B SW807 Z2125 Z2125-ND |
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Correct Use
Mounting
Turn OFF the power supply before mounting or removing the Switch,
wiring, or performing maintenance or inspection. Failure to do so may
result in electric shock or burning.
Mount the Switch onto a flat surface. Mounting on an uneven surface
may cause deformation of the Switch, resulting in faulty operation or
damage.
Operating Body
Use an operating body with low frictional resistance and of a shape
that will not interfere with the sealing rubber, otherwise the plunger
may be damaged or the sealing may deteriorate.
With the pin plunger models, set the Switch so that the plunger can
Operating Stroke Setting
Set the operating stroke so that the actuator is completely disen-
gaged when the switch is in the free position (FP), and is pushed to a
point between 60% and 90% of the OT distance after the switch is
operated.
Insufficient or excessive pushing of the actuator may result in
decreased switch durability or damage to the switch.
Using Micro Loads
Using a model for ordinary loads to switch microloads may result in
faulty operation. Instead, use the models that are designed for
microloads and that operate in the following range;
be pushed in from directly above. Since the plunger is covered with a
rubber cap, applying a force from lateral directions may cause dam-
30
0.16mA
26mA
100mA
age to the plunger or reduction in the sealing capability
.
24
Correct
Incorrect Incorrect
12
Inoperable
Operating range for
micro load models
D2SW-P01
Operating
range for
general-load
models
D2SW-P2
Handling
5
range
1mA
100mA 160mA
Do not handle the Switch in a way that may cause damage to the
0
0.1
1
10
100
1,000
sealing rubber. When handling the Switch, ensure that uneven pres-
sure or, as shown in the following diagram, pressure in a direction
other than the operating direction is not applied to the Actuator, oth-
erwise the Actuator or Switch may be damaged, or durability may be
decreased.
Current (mA)
However, even when using microload models within the operating
range shown above, if inrush current or inductive voltage spikes
occur when the contact is opened or closed, then contact wear may
increase and so decrease the service life. Therefore, insert a contact
protection circuit where necessary.
Wiring Molded Lead Wire Models
When wiring molded lead wire models, ensure that there is no weight
on the wire or that there are no sharp bends near the parts where the
wire is drawn out. Otherwise, damage to the Switch or deterioration
in the sealing may result.
Sealed Subminiature Basic Switch
D2SW-P
205
相关PDF资料 |
PDF描述 |
|---|---|
| 19502431 | LED ROUND RED RED DIFF TAB TERM |
| V-15G-4A5-K | SWITCH BASIC SPDT 15A .187QC |
| 19512331 | LED ROUND GRN GRN DIFF TAB TERM |
| SS-01-F-3 | SW SUBMINI SPST-NO .1A PIN PLNGR |
| V-10G-4A4-K | SWITCH BASIC SPDT 10A .187QC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| D2SWP01L3D | 制造商:Omron Electronic Components LLC 功能描述:SWITCH;SUBMINIATURE,SNAP ACTION,LIMIT SWITCH SIM ROLLER LEVR 61GF SEALED PCB 制造商:Omron Electronic Components LLC 功能描述:SWIT SA NO/NC SPDT SIMULATED ER LVR PC PINS 0.1A 125VAC 30VD - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH SIM ROLLER SPDT .1A PCB |
| D2SW-P01L3D | 功能描述:基本/快动开关 Sim roller levr 61gf Sealed PCB unevn .1A RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| D2SW-P01L3H | 制造商:Omron Electronic Components LLC 功能描述:MICROSWITCH SPDT 0.1A SIM ROLLER 制造商:Omron Electronic Components LLC 功能描述:MICROSWITCH, SPDT, 0.1A, SIM ROLLER 制造商:Omron Electronic Components LLC 功能描述:Switch,SPDT,sim roller,solder trm,0.1A |
| D2SWP01L3M | 制造商:Omron Electronic Components LLC 功能描述:SWIT SA NO/NC SPDT SIMULATED ER LVR WIRE LEAD 0.1A 125VAC 30 - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH SIM ROLLER SPDT .1A WIRE |
| D2SW-P01L3M | 功能描述:基本/快动开关 Sim roller levr 61gf Seald lead wire .1 A RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
发布紧急采购，3分钟左右您将得到回复。