- 您现在的位置：买卖IC网 > PDF目录18959 > D3SH-B0L1 (Omron Electronics Inc-EMC Div)SWITCH LEVER LEFT SPST-NC SMD PDF资料下载
参数资料
| 型号： | D3SH-B0L1 |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 6/8页 |
| 文件大小： | 0K |
| 描述： | SWITCH LEVER LEFT SPST-NC SMD |
| 标准包装： | 1,000 |
| 系列： | * |
| 其它名称： | D3SHB0L1 |
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Correct Use
Mounting
The cover has the same electrical potential as the COM terminal. Do not
short-circuit the cover with a NO or NC terminal when mounting the
cover.
cover
Be careful of the following points. Incorrect handling may lead to
insufficient actuator return, Switch damage, or reduced durability.
? Set the operating body in line with the direction of the actuator
movement, and make sure that the operating body is completely
separate from the actuator when the Switch is in the free posi-
tion (FP). When the actuator is operated from the crosswise
direction of the Switch, make sure that the corner of the operat-
ing body has a minimum radius of R1.
■ Caution
Electrical Ratings
Confirm the contact load in order to select an appropriate switch rat-
ing.
Do not apply an excessive electrical load to the contacts, otherwise
the contacts may weld, resulting in a short circuit or burning.
Terminal Connection
Do not use flow soldering or hand soldering to solder terminals.
Conduct reflow soldering within the range shown in the terminal tem-
perature profile below. Some reflow soldering devices have
extremely high peak values. Do a test in advance to confirm proper
soldering conditions.
Do not conduct reflow soldering more than twice. Also provide a time
interval of at least five minutes between the first and second reflow
soldering processes to allow the Switch to return to room tempera-
ture. Heating the Switch continuously (without an interval) may cause
the edges of the Switch to melt and degrade the characteristics.
When printing for a screen solder process, a 0.13-mm screen thick-
ness is recommended.
Be sure to provide local ventilation.
R1 min
Operating b ody
? Set the Switch stroke to 70% to 100% of the overtravel (the differ-
ence between the operating position and the total travel position).
255
MAX
220
150
? Do not subject the Switch to operations that involve strong impact.
Preheating time:
60 to 120 s
Heating time:
40 s max.
? Do not use the Switch as a stopper.
? Do not apply excessive loads to the cover or operate the
actuator from a direction other than a specified operating
direction.
? Do not use an adhesive to secure the Switch.
A lubricant is used in the Switch. Some of the lubricant may seep out
because the Switch does not have an airtight construction. Consider
this possibility with respect to the usage conditions when designing
or using the Switch.
Application Environment
Do not use the Switch in locations that are subject to toxic gas, sili-
con, excessive dust, excessive dirt, high temperatures, high humidity,
sudden temperature changes, water splashes, or oil splashes.
Otherwise, damage resulting by faulty contact of the Switch contacts,
corrosion, or other causes, or other functional faults may occur.
Printed Circuit Boards
Special attention must be paid to the handling of printed circuit
boards after a Switch has been mounted onto them. Airborne PCB
particles may penetrate the interior of the Switch when printed circuit
boards are separated by cutting. Also, do not stack printed circuit
boards that have Switches mounted on them.
Product Specification Details
This document provides only a partial list of specifications. It is rec-
ommended that you request complete drawings and specifications
prior to purchasing or using the product.
■ RoHS Directive Compliance
Models that are indicated as being RoHS compliant are free of the
following six substances.
Insulation and Wiring
Be sure that the installation conditions provide a sufficient insulation
distance between Switch terminals and other metal parts, lands, etc.
Cleaning
The Switch does not have an airtight construction, and it must not be
cleaned with cleaning fluids. Malfunctions may occur if the cleaning
fluid penetrates the interior of the Switch together with flux or foreign
matter from the surface of the PCB.
Confirmation with Actual Equipment
Be sure to confirm the quality of the product under the load and
environmental conditions that will be used during actual applications.
Lead:
Mercury:
Cadmium:
Hexavalent chromium:
PBB:
PBDE:
1,000 ppm max.
1,000 ppm max.
100 ppm max.
1,000 ppm max.
1,000 ppm max.
1,000 ppm max.
68
Surface Mount Detection Switch
D3SH
相关PDF资料 |
PDF描述 |
|---|---|
| 559-0202-003F | LED PANEL GRN DIFF 5V SNAP 6"LD |
| BDJ0901HFV-TR | IC TEMP SENSOR 90DEG C 5-HVSOF |
| 559-0103-003F | LED PANEL RED DIFF 12V SNAP 6"LD |
| 559-0102-003F | LED PANEL RED DIFF 5V SNAP 6"LD |
| 558-1701-007F | LED PANEL IND RED TINTED SNAP-IN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| D3SHB0R | 制造商:Omron Electronic Components LLC 功能描述:EM SWIT DETECTOR SWIT NC SPST 0.001A - Tape and Reel 制造商:Omron Electronic Components LLC 功能描述:SWITCH LEVER RIGHT SPST-NC SMD 制造商:Omron Electronic Components LLC 功能描述:Ultra small SMT micro switch, SPST-NC 制造商:Omron 功能描述:Switch Detector N.C. SPST Lever J-Bend 0.001A 5VDC SMD Embossed T/R |
| D3SH-B0R | 功能描述:基本/快动开关 Std Lever SPST-NC Rt actuate w/o boss RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| D3SHB0R1 | 制造商:Omron Electronic Components LLC 功能描述:EM SWIT DETECTOR SWIT NC SPST 0.001A - Tape and Reel 制造商:Omron Electronic Components LLC 功能描述:SWITCH LEVER RIGHT SPST-NC SMD 制造商:Omron Electronic Components LLC 功能描述:MICROSWITCH SPST-NC LONG LEV 制造商:Omron Electronic Components LLC 功能描述:MICROSWITCH, SPST-NC, LONG LEVER, RIGHT |
| D3SH-B0R1 | 功能描述:基本/快动开关 Long Lever SPST-NC Rt actuate w/o boss RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| D3SHB1L | 制造商:Omron Electronic Components LLC 功能描述:EM SWIT DETECTOR SWIT NC SPST 0.001A - Tape and Reel 制造商:Omron Electronic Components LLC 功能描述:SWITCH LEVER LEFT SPST-NC SMD 制造商:Omron Electronic Components LLC 功能描述:MICROSWITCH SPST-NC LEVER L 制造商:Omron Electronic Components LLC 功能描述:MICROSWITCH, SPST-NC, LEVER, LEFT |
发布紧急采购，3分钟左右您将得到回复。