- 您现在的位置：买卖IC网 > PDF目录18895 > D3V-014-3C23-K (Omron Electronics Inc-EMC Div)SWITCH LEVER SPST-NO .1A SOLDER PDF资料下载
参数资料
| 型号： | D3V-014-3C23-K |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 15/16页 |
| 文件大小： | 0K |
| 描述： | SWITCH LEVER SPST-NO .1A SOLDER |
| 标准包装： | 100 |
| 系列： | * |
| 其它名称： | D3V0143C23K |
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Correct Use
Mounting Direction
Mount lever-operated switches with a maximum operating force of
0.49 N in a direction where the actuator weight will not be applied to
the switch. Since the switch is designed for a small load, its resetting
force is small. Therefore, resetting failure may occur if unnecessary
load is applied to the switch.
Insulation Distance
According to EN61058-1, the minimum insulation thickness for this
switch should be 1.1 mm and minimum clearance distance between
the terminal and mounting plate should be 1.9 mm. If the insulation
distance cannot be provided in the product incorporating the switch,
either use a switch with insulation barrier or use a Separator to
ensure sufficient insulation distance.
Using Microloads
Using a model for ordinary loads to switch microloads may result in
faulty operation. Instead, use the models that are designed for
microloads and that operate in the following range;
Operatin g
■ Cautions
Handling
Be careful not to drop the switch. Doing so may cause damage to the
switch’s internal components because it is designed for a small load.
Operatin g ran g e
for micro load
models D3V-01
ran g e for
g eneral-
load models
Inoperable
ran g e
Current (mA)
However, even when using microload models within the operating
range shown above, if inrush current or inductive voltage spikes
occur when the contact is opened or closed, then contact wear may
increase and so decrease the service life. Therefore, insert a contact
protection circuit where necessary.
Solder Terminal Approval Conditions
Use of soldering iron for normal soldering is acceptable.
Soldering hook holes version available.
Soldering terminal types 1 and 2 are met.
Miniature Basic Switch
D3V
87
相关PDF资料 |
PDF描述 |
|---|---|
| D3V-16G3M-3A5-K | SWITCH LEVER SPST-NO 16A SOLDER |
| AH1762619-A | SWITCH MINI SPDT HINGE GOLD PCB |
| 2150A4 | LAMP NEON WHITE 125V PNL MNT |
| D3V-16G3M-2A5-K | SWITCH LEVER SPST-NC 16A SOLDER |
| 3925-0 | CLIP MINIGRABBER D-I-Y 10PC BLK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| D3V0143C23T | 制造商:Omron Electronic Components LLC 功能描述:MINIATURE BASIC SWITCH - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH LEVER .1A SPST-NO .187QC |
| D3V-014-3C23-T | 功能描述:SWITCH LEVER .1A SPST-NO .187QC RoHS:是 类别:开关 >> 快动，限位，拉杆 系列:* 其它有关文件:Declaration of Conformity 标准包装:1 系列:* |
| D3V0143C3TK | 制造商:Omron Electronic Components LLC 功能描述:MINIATURE BASIC SWITCH - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH LEVER SPST-NO .1A SOLDER |
| D3V-014-3C3-T-K | 功能描述:基本/快动开关 MINIATURE BASIC SWITCH RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| D3V014M1C23 | 制造商:Omron Electronic Components LLC 功能描述:SWIT SA NO/NC SPDT SIMULATED ER LVR QC 0.1A 125VAC 30VDC 0.2 - Trays 制造商:Omron Electronic Components LLC 功能描述:SWITCH LEVER SPDT 0.1A QC TERM |
发布紧急采购，3分钟左右您将得到回复。