- 您现在的位置：买卖IC网 > PDF目录237741 > D4N-2F72 SNAP ACTING/LIMIT SWITCH, 3PST, MOMENTARY, 2.5A, 250VDC, 9mm, PANEL MOUNT PDF资料下载
参数资料
| 型号： | D4N-2F72 |
| 元件分类： | 开关 |
| 英文描述： | SNAP ACTING/LIMIT SWITCH, 3PST, MOMENTARY, 2.5A, 250VDC, 9mm, PANEL MOUNT |
| 文件页数： | 13/24页 |
| 文件大小： | 6206K |
| 代理商： | D4N-2F72 |
20
D4N
Recommended Connectors
Use connectors with screws not exceeding 9 mm, otherwise the
screws will protrude into the case interior, interfering with other
components in the case.
The connectors listed in the following table have connectors with
thread sections not exceeding 9 mm.
Use the recommended connectors to ensure conformance to IP67.
Use LAPP connectors together with seal packing (JPK-16, GP-13.5,
or GPM20), and tighten to the specified tightening torque. Seal
packing is sold separately.
LAPP is a German manufacturer.
Before using a 2-conduit 1/2-14NPT type, attach the provided
changing adaptor to the Switch and then connect the
recommended connector.
Others
When attaching a cover, be sure that the seal rubber is in place and
that there is no foreign material present. If the cover is attached
with the seal rubber out of place or if foreign material is stuck to the
rubber, a proper seal will not be obtained.
Do not use any screws to connect the cover other than the
specified ones. The seal characteristics may be reduced.
Make sure that foreign particles do not enter the head when
removing the screws from the four corners to change the head
position in any of the four directions.
Use the following recommended countermeasures to prevent
telegraphing when using adjustable or long levers.
1. Make the rear edge of the dog smooth with an angle of 15
° to
30
° or make it in the shape of a quadratic curve.
2. Design the circuit so that no error signal will be generated.
Size
Manufacturer
Model
Applicable cable
diameter
G1/2
LAPP
ST-PF1/2
5380-1002
6.0 to 12.0 mm
Pg13.5
LAPP
ST-13.5
5301-5030
6.0 to 12.0 mm
M20
LAPP
ST-M20
× 1.5
5311-1020
7.0 to 13.0 mm
1/2-14NPT
LAPP
ST-NPT1/2
5301-6030
6.0 to 12.0 mm
相关PDF资料 |
PDF描述 |
|---|---|
| D4N-8222 | SNAP ACTING/LIMIT SWITCH, DPST, MOMENTARY, 2.5A, 250VDC, PANEL MOUNT |
| D4N-8232 | SNAP ACTING/LIMIT SWITCH, DPST, MOMENTARY, 2.5A, 250VDC, 6mm, PANEL MOUNT |
| D4N-9122 | SNAP ACTING/LIMIT SWITCH, DPST, MOMENTARY, 2.5A, 250VDC, PANEL MOUNT |
| D5B-5515 | SNAP ACTING/LIMIT SWITCH, MOMENTARY, 0.03A, 30VDC, 22mm, PANEL MOUNT |
| D102J13G215PQA | ROCKER SWITCH, SPST, LATCHED, PANEL MOUNT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| D4N-2FLE | 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:D4N-2FLE |
| D4N-2FRE | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:D4N-2FRE 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:D4N-2FRE |
| D4N3120 | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:SWITCH SAFETY ROLLER LEVER |
| D4N-3120 | 功能描述:基本/快动开关 SafetySwitch/1NC+1NO snpAct/NPT RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| D4N3122 | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:SWITCH SAFETY ROLLER LEVER 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:Switch Limit N.O./N.C. SPDT Side Roller Lever Conduit 10A 250VAC 5N Rotary Screw Mount |
发布紧急采购，3分钟左右您将得到回复。