- 您现在的位置：买卖IC网 > PDF目录93025 > D6B-2P POSITION, ROTARY SENSOR-HALL EFFECT, 45-75deg, 0.5-2.5V, SURFACE MOUNT PDF资料下载
参数资料
| 型号： | D6B-2P |
| 元件分类： | Position, Rotary, Hall Effect Sensor |
| 英文描述： | POSITION, ROTARY SENSOR-HALL EFFECT, 45-75deg, 0.5-2.5V, SURFACE MOUNT |
| 文件页数： | 3/6页 |
| 文件大小： | 568K |
| 代理商： | D6B-2P |
Micro Tilt Sensor
D6B
3
Precautions
The Sensor does not use any materials detrimental to the ozone
layer.
Specifications other than the electrical or mechanical characteris-
tics, external dimensions, or mounting dimensions of the Sensor
are subject to change without notice.
■ Handling Precautions
Operating Environment
The Sensor consists of a Hall IC and a magnet. Check that the
Sensor in operation will not be influenced by any external magnetic
fields.
Do not install any magnetic materials within 2 mm of the Sensor,
else the performance characteristics of the Sensor may not be
guaranteeable. If there are any objects (e.g., motors and solenoids)
generating magnetic fields near the Sensor, operate and test the
Sensor before the Sensor comes into actual use.
Do not apply any voltage exceeding 5V to the Sensor, else the Sen-
sor may break.
Do not wash the Sensor after the Sensor is soldered.
Do not mount or dismount the Sensor while power is flowing to the
Sensor.
The Sensor may generate error signals if impacted at a minimum
acceleration of 294 m/s2.
The Sensor may generate error signals if a vibration at a minimum
frequency of 15 Hz and a minimum acceleration of 15m/s2 is
applied to the Sensor.
Confirm that no static electricity at a maximum voltage of 5kV is
applied to the pins, else the Sensor may break.
Operating Characteristics
The present output may stay unchanged if the inclination of the Sen-
sor back and forth is 20° or more. Under that condition, the output
might not change even when the Sensor is leaned left or right.
Tape Packing
■ Reel Dimensions
Note: 1. This packing conforms to standard of EIAJ.
2. Quantity per reel: 2,000 pieces.
3. Each reel is packaged within a sealed bag to protect the sensor from the effects of moisture and humidity. In order to maintain optimal
solderability and performance, after the bag’s seal is broken, ensure that storage conditions do not exceed 30°C, 80% RH and that reflow
soldering/assembly occurs within two months.
Direction
of gravity
If the Sensor is kept inclined back or forth as shown in the above
illustration, the level of output might not change from high to low or low to
high when the Sensor inclines left or right.
20 min.
(Example)
相关PDF资料 |
PDF描述 |
|---|---|
| D82 | MALE, TELECOM AND DATACOM CONNECTOR, PLUG |
| D83 | MALE, TELECOM AND DATACOM CONNECTOR, PLUG |
| D84 | FEMALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SURFACE MOUNT, SOCKET |
| D89 | MALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SOLDER |
| D96 | MALE, RIGHT ANGLE TELECOM AND DATACOM CONNECTOR, SOLDER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| D6B-2P | 制造商:Omron Electronic Components LLC 功能描述:Tilt Switch |
| D6BN | 制造商:OMRON 制造商全称:Omron Electronics LLC 功能描述:Micro Tilt Sensor |
| D6BN1 | 功能描述:振动与倾斜传感器 RoHS:否 制造商:Murata 工作角: 安装风格:SMD/SMT 系列:SCA100T 封装: |
| D6BN-1 | 制造商:Omron Electronic Components LLC 功能描述:SENSOR TILT PCB MOUNT |
| D6BN-1(100) | 功能描述:振动与倾斜传感器 Micro-Tilt Switch RoHS:否 制造商:Murata 工作角: 安装风格:SMD/SMT 系列:SCA100T 封装: |
发布紧急采购，3分钟左右您将得到回复。