- 您现在的位置：买卖IC网 > PDF目录51457 > DBD-25PA (ITT CANNON) 25 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, SOLDER, PLUG PDF资料下载
参数资料
| 型号： | DBD-25PA |
| 厂商： | ITT CANNON |
| 元件分类： | D-微型连接器 |
| 英文描述： | 25 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, SOLDER, PLUG |
| 文件页数： | 4/5页 |
| 文件大小： | 131K |
| 代理商： | DBD-25PA |
www.ittcannon.com
362
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
Environmental D
D*D
Mounting Dimensions
Panel Cutouts
With both connectors rear mounted, ues #4-40
flat head screws flush with the panel (Fig. 1).
With both connectors front mounted, use #4-40
binder or pan head screws (Fig. 2).
With both connectors rear mounted (float rivets
on plug assembly side); use #4-40 flat head
scerws, flush with the panel (Fig. 3).
With both connecotrs front mounted (plug as-
sembly has float mounting screw), use #4-40
binder or pan head screws for receptacle as-
sembly (Fig. 4)
With plug assembly front mounted and recepta-
cle assembly rear mounted, use hardware from
Figures 5 and 6.
With plug assembly front mounted and recepta-
cle assembly rear mounted (plug assembly has
float mounting screw), use hardware fron figure
1 for receptacle assembly.
* Dimensions between panels represent the rec-
ommended limit to be used in the design of the
connector mounting method.
With plug assembly rear mounted and receptaccle
assembly front mounted, use hardware from
Figures 1 and 2.
With plug assembly rear mounted (float rivets)
and receptacle assembly front mounted, use
hardware from Figures 2 and 3.
Electrical contact engagement when mounted
per Figure 1 is .046 (1.17) min./.070(1.78) max.
.189 +
_ .015
(4.80 +
_ 0.38)
.292 +
_ .010
(7.42 +
_ 0.25)
.133 +
_ .010
(3.38 +
_ .025)
.324 +
_ .010
(8.23 +
_ 0.25)
.194 +
_ .008
(4.94 +
_ 0.19)
.230 +
_ .013
(5.85 +
_ 0.32)
.280 +
_ .013
(7.11 +
_ 0.32)
.230 +
_ .013
(5.85 +
_ 0.32)
4-40 NC2A THREAD
REAR
FRONT
PLUG
RECEPT
Figure 1
Figure 2
PLUG
RECEPT
Figure 3
Figure 4
PLUG
RECEPT
Figure 7
USE .120(3.05) DIA. HOLE OR 4-40 TAP (CUSTOMER PREFERENCE) FOR FRONT MOUNTING.
FOR REAR MOUNTING USE .120(3.05) DIA. HOLE COUNTERSUNK FOR FLATHEAD SCREW.
F
E
C
A
D
.083(2.11) R. MAX.
TYPICAL
Add .032 (0.81) to dimensions C and E for float mounting.
Note: Panel cutout does not allow for potting cup clearance.
Shell Size
DED-9
DAD-15
DBD-25
DCD-37
DDD-50
1.442 (36.63)
1.755 (44.58)
2.295 (58.29)
2.937 (74.60)
2.859 (72.62)
.839 (21.31)
1.157 (29.39)
1.697 (43.10)
2.357 (59.87)
2.265 (57.53)
.614 (15.60)
.735 (18.67)
.497 (12.62)
.610 (15.49)
1.125 (28.58)
1.437 (36.50)
1.993 (50.62)
2.625 (66.68)
2.531 (64.29)
A
+
_ .010 (0.25)
D
+
_ .010 (0.25)
F
+
_ .006 (0.15)
C
Min.
E
Min.
Figure 8
PLUG
RECEPT
Figure 5
Figure 6
NOTE: Max panel thickness is .125 (3.17) for
non-floating rear panel mounting.
NOTE: Float rivets are for rear mounting only and
float screw for front mounting only. (Specify when
ordering.)
1.
2.
3.
4.
5.
6.
7.
8.
9.
相关PDF资料 |
PDF描述 |
|---|---|
| DBD-25SA | 25 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, SOLDER, RECEPTACLE |
| DBDA-25P-F0 | 25 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, CRIMP, PLUG |
| DBDA-25S-F0 | 25 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, CRIMP, RECEPTACLE |
| DCD-37PA | 37 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, SOLDER, PLUG |
| DCD-37SA | 37 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, SOLDER, RECEPTACLE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DBD2600-1R | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| DBD2600-1U | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| DBD2600-2R | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| DBD2600-2U | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| DBD2600-3R | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
发布紧急采购，3分钟左右您将得到回复。